Information
-
NC Number
-
Street number / Lot number
-
Street Name
-
Suburb
-
Scope of Work performed?
-
Works Conducted on
-
Prepared by
-
Works Performed By? Provide Panel Member Company Name
- Water Industry Solutions (WIS)
- (CML) CML Utility Services
- Peninsula Pumping Service (PPS)
- Howrah Plumbing
- Oliver Kelly Group
- Treloar Civil & Quarries
- Paneltec
- AJ Water
- Maintain Contracting
- Select Plumbing
- MS Civil
- Duggans
- NuJet
- J&J Plumbing & Gasfitting Pty Ltd / Protech
- Palmers Plumbing
- North East Plumbing
- A & M Cox Plumbing
-
PID
-
Title Reference number
Pre-Works Photos
-
Photos of property prior to works being performed
Safety
Safety
-
Traffic Management /control needed?
-
Upload a photo of the Traffic Guidance Scheme (TGS)
-
Photo/s showing traffic management in place
-
Why was no traffic control/management need?
-
SWMS completed?
-
Any Hazards Identified?
-
What are the hazards?
Works Performed - Details & Photos
Works performed summary
-
Any WATER works performed?
-
Was a new fire plug installed?
Fire Plug Install photos - repeat this section for every new Fire Plug installed
-
Fire Plug photos
-
Photos showing the excavation works
-
Photos showing the installation of a new fire plug
-
Photos showing the backfill of excavation works
-
Photos showing reinstatement
-
Photos showing fire plug road markings
-
Fire Plug location details
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The measurements from the nearest public road
-
The length (in metres) of the connecting pipework from the mains connection point to the fire plug
-
The depth (in millimetres) of the pipe work at the connection point and termination of the fire plug
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Has a flow test been completed?
-
If you don't have flow testing equipment, please contact TasWater on 13 6992 to arrange a flow test and send a copy of the flow test results with the completion sheet pack.
-
Please upload load a copy of the flow test results.
-
Was a fire hydrant installed?
Fire Hydrant Install photos - repeat this section for every new Fire Hydrant installed
-
Fire Hydrant photos
-
Photos showing the excavation works
-
Photos showing the installation of a new hydrant
-
Photos showing the backfill of excavation works
-
Photos showing reinstatement
-
Photos showing hydrant road markings
-
Fire Hydrant location details
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The measurements from the nearest public road
-
The length (in metres) of the connecting pipework from the mains connection point to the hydrant
-
The depth (in millimetres) of the pipe work at the connection point and termination of the hydrant
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Has a flow test been completed?
-
If you don't have flow testing equipment, please contact TasWater on 13 6992 to arrange a flow test and send a copy of the flow test results with the completion sheet pack.
-
Please upload load a copy of the flow test results.
-
Was a new water connection installed?
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service details (for CIB)
-
What size is the new Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photos showing Fire service assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
Fire Connection/Water works photos & location details - Repeat this section for every new water connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new connection property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Photos showing Domestic meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Is meter installation Complete?
-
Was a manifold installed?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Water Connection & Meter details (for CIB)
-
What ID size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every New Water Connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter Details (for CIB) - repeat this section for every new METER installed on a new water connection
-
Water Connection & Meter details (for CIB)
-
What ID size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every New Water Connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was the existing water connection upgraded?
-
Was the existing water connection downsized?
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service Details (for CIB)
-
What size is the new Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photo showing Fire Service meter assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photo showing the Domestic Meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
Water works photos & location details - Repeat this section for every water Downsize performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the downsize property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a manifold installed?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Water Connection & Meter details (for CIB)
-
What ID size was the existing connection downsized to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every downsized water connection performed
-
Water Works & Reinstatement Photos
-
Photos showing the installation of the downsized property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter Details - repeat this section for every METER installed on a downsized connection (for CIB)
-
Water Connection & Meter details (for CIB)
-
What ID size was the existing water connection downsized to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every downsized water connection performed
-
Water Works & Reinstatement Photos
-
Photos showing the installation of the downsized property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a Fire Service installed on existing connection?
Fire Service Details - repeat this section for every Fire Service installed
-
Fire Service Details (for RA Revenue Assurance)
-
What size is the Fire Service size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photos showing Fire service assembly
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Date the Fire service was installed
-
Description of land at time of Connection - Fire Service
Water works photos & location details - Repeat this section for every water upgrade performed
-
Water Works & Reinstatement Photos
-
Photo showing TasWater Mains
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the upgraded property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service
-
Domestic Meter Details
-
What size is the existing Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photos showing domestic meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Was a manifold installed on an existing water connection?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Water Connection & Meter details (CIB)
-
What size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Meter install works photos & location details - Repeat this section for every manifold installed on an existing water connection
-
Water Works & Reinstatement Photos
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter Details (for CIB) - repeat this section for every new Meter installed on an existing connection
-
Water Connection & Meter details (for CIB)
-
What ID size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Meter install works photos & location details - Repeat this section for every Meter installed on an existing connection
-
Water Works & Reinstatement Photos
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service Details (for CIB)
-
What size is the Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photo showing Fire Service meter assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
Water works photos & location details - Repeat this section for every water upgrade performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the upgrade property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photo showing the Domestic Meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Was a manifold installed on an existing water connection?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Existing Water Connection & Meter details (for CIB)
-
What ID size was the existing water connection upgraded to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Upgraded Water Connection & Meter details (for CIB)
-
Meter Details (for CIB)
-
What ID size was the existing water connection upgraded to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Upgraded water works photos & location details - Repeat this section for every water upgrade performed
-
Water Works & Reinstatement Photos
-
Photo showing TasWater Mains
-
Photos showing the installation of the upgraded property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a brand-new water connection installed?
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
What size is the new Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photos showing Fire service assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
Fire Connection/Water works photos & location details - Repeat this section for every new water connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new connection property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Photos showing Domestic meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Is meter installation Complete?
-
Was a manifold installed?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
-
Was the existing meter re-used on the manifold?
-
Existing Water Connection & Meter details (for CIB)
-
What size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Was the existing meter removed? (for CIB)
-
What was the removed meter size? (for CIB)
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the removed meter serial number & meter reading
-
Clear close-up photo showing the removed meter radio number
-
Date of meter removal
-
Description of property at time of disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
Meter Details - repeat this section for every NEW METER installed on a manifold (for CIB)
-
Water Connection & Meter details (CIB)
-
What size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every new Water Connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter Details (for CIB) - repeat this section for every new meter installed on a new connection performed
-
Water Connection & Meter details (for CIB)
-
What size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every new Water Connection performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the new property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was the existing water connection upgraded?
-
Was the existing water connection downsized?
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service Details (for CIB)
-
What size is the new Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photo showing Fire Service meter assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photo showing the Domestic Meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
Water works photos & location details - Repeat this section for every water Downsize performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the downsize property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a manifold installed?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Water Connection & Meter details (for CIB)
-
What size is the new water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every Downsized Water Connection performed
-
Water Works & Reinstatement Photos
-
Photos showing the installation of the downsized property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter Details - repeat this section for every METER installed on -
Water Connection & Meter details (for CIB)
-
What size was the existing water connection downsized to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photo showing meter installed in boundary box
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every Downsized Water Connection performed
-
Water Works & Reinstatement Photos
-
Photos showing the installation of the downsized property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a Fire Service installed on existing connection?
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service Details (for CIB)
-
What size is the Fire Service size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photos showing Fire service assembly
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Date the Fire service was installed
-
Description of land at time of Connection - Fire Service
-
Water Works & Reinstatement Photos
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the existing Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photos showing domestic meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Water Works & Reinstatement Photos
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a meter installed on existing water connection?
-
Was a manifold installed on an existing water connection?
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
Meter Details - repeat this section for every METER installed on a manifold (for CIB)
-
Existing Water Connection & Meter details (for CIB)
-
What size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Water works photos & location details - Repeat this section for every Manifold installed
-
Water Works & Reinstatement Photos
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Meter details - repeat this section for every METER installed on existing water connection (for CIB)
-
What size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Water Works & Reinstatement Photos
-
Photos showing excavation works
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a Fire Service installed
Fire Service Details - repeat this section for every Fire Service installed (for CIB)
-
Fire Service Details (for CIB)
-
What size is the Fire Service Connection size?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What size is the Bypass Meter size?
-
Bypass meter serial number
-
Clear close-up photo showing the Bypass meter serial number & meter reading
-
Bypass meter radio number
-
Clear close-up photo showing the Bypass meter radio number
-
How was the Fire service installed?
-
Photo showing Fire Service meter assembly
-
Date the Fire service was installed
-
Serviced Property (e.g. unit 1 or Lot 1) - Fire Service
-
Description of land at time of Connection - Fire Service
Water works photos & location details - Repeat this section for every water upgrade performed
-
Water Works & Reinstatement Photos
-
Photo showing the water connection point on TasWater infrastructure (i.e. Pipe Tees (including any isolation valve)
-
Photos showing the installation of the upgrade property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a domestic meter assembly installed with the fire service?
Domestic Meter Details - repeat this section for every Domestic assembly installed with a Fire Service (for CIB)
-
Domestic Meter Details (for CIB)
-
What size is the Domestic meter?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
What size is the New Water Connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
Domestic meter serial number
-
Clear close-up photo showing the Domestic meter serial number & meter reading
-
Domestic meter radio number
-
Clear close-up photo showing the Domestic meter radio number
-
How was the Domestic Meter situated?
- Above ground assembly
- Below ground in boundary boxes
- Below ground in trafficable boxes
- Cabinet arrangement
-
Is meter installation Complete?
-
Photo showing the Domestic Meter assembly
-
Date of Domestic meter install
-
Serviced Property (e.g. unit 1 or Lot 1) - Domestic
-
Description of land at time of Connection - Domestic
-
Was a manifold installed on an existing water connection? (for CIB)
-
How many meters were installed on a manifold?
-
Photo showing manifold construction prior to backfilling
-
Was the existing meter re-used on the manifold?
-
Existing Water Connection & Meter details (for CIB)
-
What size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
-
Was the existing meter removed? (for CIB)
-
What was the removed meter size? (for CIB)
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the removed meter serial number & meter reading
-
Clear close-up photo showing the removed meter radio number
-
Date of meter removal
-
Description of property at time of disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
Meter Details - repeat this section for every NEW METER installed on a manifold (for CIB)
-
Existing Water Connection & Meter details (for CIB)
-
What size is the existing water connection?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Meter details - repeat this section for every METER installed on an upgraded water connection (for CIB)
-
What size was the existing water connection upgraded to?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What is the meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the meter serial number & meter reading
-
Meter radio number
-
Clear close-up photo showing the meter radio number
-
Date of meter install
-
Meter serviced (e.g. unit 1)
-
Is meter installation Complete?
-
Description of land at time of Connection
-
How was the meter installed?
- Above ground assembly
- Below ground in a boundary box
- Below ground in a trafficable box
- Cabinet arrangement
-
Photos showing completed meter installation
-
Photo showing meter boundary box was installed
-
Photo showing the meter is self draining in meter
-
Photos showing completed meter installation
-
Photo showing trafficable meter box was installed
-
Photo showing the meter is self draining in meter box
-
Photos showing completed meter installation
-
Photos showing completed meter installation
Upgraded water works photos & location details - Repeat this section for every Upgraded Water Connection performed
-
Water Works & Reinstatement Photos
-
Photo showing TasWater Mains
-
Photos showing the installation of the upgraded property water connection pipework
-
Photos showing the installation of metallic detector tape
-
Photos showing backfill
-
Photos showing reinstatement of excavations works, including meter assembly
-
Water meter location
-
The measurements from the property boundaries (e.g. 5mtrs from left boundary & 500mm from front boundary)
-
The length (in metres) of the connecting pipework from the mains connection point.
-
The depth (in millimetres) of the pipe work at the connection point.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a disconnection performed?
a downsized connection (for CIB)
Disconnection Works - Details & Photos
-
Was an existing WATER connection capped & sealed?
-
Was the pipe work removed?
WATER Disconnected Service Photos & Details - repeat this for each Water disconnect (for CIB)
-
WATER Disconnected Service details (for CIB)
-
What size was the existing water connection that was disconnected?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What was the removed meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the removed meter serial number & meter reading
-
Clear close-up photo showing the removed meter radio number
-
Date of meter removal
-
Description of property at time of disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Water Disconnected Service (Customer Connections & Asset info)
-
Photos showing the existing connection
-
Photos showing excavation works
-
Photo showing the cap and seal of existing water connection
-
Photos showing backfill
-
Photos showing reinstatement of excavation area
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was an existing SEWER connection capped & sealed?
Sewer Disconnection Photos & Details - repeat this section for every sewer disconnection (for CIB)
-
SEWER Disconnected Service details (for CIB)
-
What size was the existing sewer connection that was disconnected?
-
Date of sewer disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Disconnected Service (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the existing sewer connection
-
Photo showing the cap and seal of existing connection
-
Photos showing backfill
-
Reinstatement of excavation works
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was an existing SEWER connection capped & sealed?
Sewer Disconnection Details - repeat this section for every sewer disconnection
-
SEWER Disconnected Service details (for RA Revenue Assurance)
-
What size was the existing sewer connection that was disconnected?
-
Date of sewer disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Disconnected Service (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the existing sewer connection
-
Photo showing the cap and seal of existing connection
-
Photos showing backfill
-
Reinstatement of excavation works
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Disconnection Works
-
Was a disconnection performed?
Disconnection Works - Details & Photos
-
Was an existing WATER connection capped & sealed?
-
Was the pipe work removed?
WATER Disconnected Service Photos & Details - repeat this for each Water disconnect (for CIB)
-
WATER Disconnected Service details (for CIB)
-
What size was the existing water connection that was disconnected?
- ID20mm
- ID25mm
- ID32mm
- ID40mm
- ID50mm
- ID65mm
- ID80mm
- ID100mm
- ID150mm
- ID200mm
-
What was the removed meter size?
- DN20mm
- DN25mm
- DN32mm
- DN40mm
- DN50mm
- DN65mm
- DN80mm
- DN100mm
- DN150mm
- DN200mm
-
Meter Serial number
-
Clear close-up photo showing the removed meter serial number & meter reading
-
Clear close-up photo showing the removed meter radio number
-
Date of meter removal
-
Description of property at time of disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Water Disconnected Service (Customer Connections & Asset info)
-
Photos showing the existing connection
-
Photos showing excavation works
-
Photo showing the cap and seal of existing water connection
-
Photos showing backfill
-
Photos showing reinstatement of excavation area
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was an existing SEWER connection capped & sealed?
Sewer Disconnection Photos & Details - repeat this section for every sewer disconnection (for CIB)
-
SEWER Disconnected Service details (for CIB)
-
What size was the existing sewer connection that was disconnected?
-
Date of sewer disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Disconnected Service (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the existing sewer connection
-
Photo showing the cap and seal of existing connection
-
Photos showing backfill
-
Reinstatement of excavation works
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was an existing SEWER connection capped & sealed?
Sewer Disconnection Details - repeat this section for every sewer disconnection (for CIB)
-
SEWER Disconnected Service details (for CIB)
-
What size was the existing sewer connection that was disconnected?
-
Date of sewer disconnection
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Disconnected Service (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the existing sewer connection
-
Photo showing the cap and seal of existing connection
-
Photos showing backfill
-
Reinstatement of excavation works
-
The measurements from the property boundaries to the disconnection point on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
Sewer Works
-
Any SEWER works performed?
-
Was a new sewer connection performed?
-
Was a Pressure Sewer Unit installed?
Pressure Sewer Unit installed - Repeat this section for every PSU install (for CIB)
-
Sewer Connection Details (for CIB)
-
What size is the new sewer connection?
-
Date of sewer works were installed
-
Is sewer installation complete?
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Work Photos (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the sewer connection point on TasWater infrastructure.
-
Photos showing the installation of the pipe work
-
Photos showing the install of the boundary kit
-
Photos showing the installation of the PSU tank
-
Photos showing backfill of sewer works
-
Photos showing reinstatement of excavations including the PSU tank, boundary kit and alarm install
-
Photos showing the installation of metallic detector tape
-
Sewer location details
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the main/manhole connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Has the PSU been commissoned?
-
Please make arrangements to have the unit commissioned and send in a copy of the PSU commissioning certificate with your completion sheet pack to Connections@taswater.com.au
-
Upload a photo of the PSU commissioning certificate
-
Upload a photo of the electrical commissioning certificate
Sewer Connection Details - repeat this section for every new sewer connection installed (for CIB)
-
Sewer Connection Details (for CIB)
-
What size is the new sewer connection?
-
Date of sewer works were installed
-
Is sewer installation complete?
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Work Photos (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the sewer connection point on TasWater infrastructure.
-
Photos showing the installation of the pipe work
-
Photos showing the installation of the IO (Inspection Opening)
-
Photos showing backfill of sewer works
-
Photos showing the installation of metallic detector tape
-
Photos showing reinstatement of excavations including IO (Inspection Opening) install
-
Sewer location details
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the main/manhole connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a trafficable IO cover installed
-
Photo showing installation of trafficable IO cover
-
Sewer location details
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the main/manhole connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was the existing sewer connection upgraded?
Sewer Connection Details - repeat this section for every sewer connection upgrade performed (for CIB)
-
Sewer Connection Upgrade Details (for CIB)
-
What size was the existing sewer connection upgraded to?
-
Date of sewer install
-
Is sewer installation complete?
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Work Photos (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the sewer connection point on TasWater infrastructure.
-
Photos showing the installation of the pipe work
-
Photos showing the installation of the IO (Inspection Opening)
-
Photos showing backfill of sewer works
-
Photos showing the installation of metallic detector tape
-
Photos showing reinstatement of excavations works including the IO install
-
Was a trafficable IO cover installed
-
Photo showing installation of trafficable IO cover
-
Sewer location details (Customer Connections & Asset info)
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the main/manhole connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was the existing sewer connection relocated?
Sewer relocation details - repeat this section for every sewer connection relocation performed (for CIB)
-
Sewer Relocation Details (for CIB)
-
What size was the existing sewer connection?
-
Date of sewer relocation
-
Is sewer installation complete?
-
Serviced Property (e.g. unit 1 or Lot 1)
-
Description of property at time of works being performed?
-
Sewer Work Photos (Customer Connections & Asset info)
-
Photos showing the excavation works
-
Photos showing the installation of the pipe work
-
Photos showing the installation of the IO (Inspection Opening)
-
Photos showing backfill of sewer works
-
Photos showing the installation of metallic detector tape
-
Photos showing reinstatement of excavations works including IO install
-
Was a trafficable IO cover installed
-
Photo showing installation of trafficable IO cover
-
Sewer location details
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the main/manhole connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a new Maintenance Shaft installed?
Photos of new Maintenance Shaft installation - repeat this section for every new Maintenance Shaft installation
-
Maintenance Shaft installation Photos
-
Photos showing the excavation works
-
Photos showing the installation of a new Maintenance Shaft
-
Photos showing the backfill of excavation works
-
Photos showing reinstatement of excavations
-
Maintenance Shaft installation location details
-
The measurements from the property boundaries to the new Maintenance Shaft on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a new Manhole installed?
Photos of new Manhole installation - repeat this section for every new Manhole installation
-
Manhole photos
-
Photos showing the excavation works
-
Photos showing the installation of a new manhole
-
Photos showing the backfill of excavation works
-
Photos showing reinstatement
-
Manhole location details
-
The measurements from the property boundaries
-
The measurements from the property boundaries to the new Manhole on TasWater mains.
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
-
Was a new Manhole installed?
Photos of new Manhole installation - repeat this section for every new Manhole installation
-
Photos showing the excavation works
-
Photos showing the installation of a new manhole
-
Photos showing the backfill of excavation works
-
Photos showing reinstatement
-
Location details of new manhole
-
The measurements from the property boundaries
-
The length (in metres) of the connecting pipework from the mains connection point to the IO.
-
The depth (in millimetres) of the pipe work at the connection point and termination IO for sewer
-
Northerly bearing
- North ↓
- North ↙
- North ↘
- North ↗
- North ↖
- North ↑
- North →
- North ←
AsCons & Endorsed plans
-
Once the Auditor report is complete, please save it as a PDF. To save the meter details sheets and Endorsed plans, CCW (Certificate for Certifiable Work *where applicable), signed copy of the MSA Statement of Works & Ascon drawings to the Auditor report, save each document as a separate PDF, then merge all PDF documents together into one combined PDF and send that one merge PDF document to Connections@taswater.com.au for processing. Thank you!
Panel Member Sign off of Works Completed
-
Full name of Panel Member onsite Supervisor (type full name and sign)
-
Full name of Panel Member onsite Plumber (type full name and sign)
-
Comments
-
Was any loose supply items given to the site contact? e.g. lock & pin
-
Please provide Full Name of person who was given the loose supply items
-
What loose supply item/s where given to site contact?
- Lock & pin
- DN25mm Bypass meter, nuts & tails
- Other? please provide a list of the items
