Title Page

  • TBC_Checklist_Lifting of Pre Fab rebar

  • Site conducted

  • Conducted on

  • Prepared by

  • Location

Wall construction

  • Is the rebar wall tided every 4th bar with cross ties / A parede de ferro esta atada a cada 4 barras

  • Are the starter bars on top securely fastened / Os ferros de arranque na parte de cima estão seguros

  • Are the corners secured with cross ties / Os cantos estao seguramente atados com pontos cruzados

  • Is there any free bar in the wall (not tied) / Tem barras soltas na parede

  • Is the rebar structure stable / A parede esta estavel

Wall lifting points

  • Is the straps laced to the 4th sidebare from the top down / As cintas estao amarradas a 4 barra lateral de cima para baixo

  • Is the sidebar from the lifting point tied with cross wire minimum 1 metre out / A barra lateral so ponto de elevacao esta atada no minimo de 1 metro para fora

  • After lifting 30cm from the floor do the pre fab wall look stable and with no loose ends / Depois de levantar 30cm do chao. a parede prefab parece estavel e sem pontas soltas

  • If the walls longer then 4,00m, need lifting beam? / Se a parede for maior que 4,00m de comprimento precisa de balança?

  • Are the right straps certificated for the lift / As cintas são certificadas para o içamento?

  • Signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.