Title Page
-
Company Name
-
Job Site Name
-
Foreman
-
Conducted on
-
Prepared by
-
Location
Cranes, Forklifts, Rigging, and Material Handling
-
Is the crane operator NCCCO certified for the crane being operated or is the forklift operator trained?<br>
-
Has the fall zone been barricaded or controlled?
-
Is the ground condition ok and are outrigger pads being used?
-
Is the crane/forklift maintaining 20 feet of clearance from overhead power lines?
-
Are qualified riggers and signal persons being used?
-
Is proper fall protection in place while performing material handling operations?
-
Are trash boxes, hoisting parachutes, and rigging maintained?
-
Has the documented monthly inspection been completed for the crane?<br>
DOT information
-
Are commercial drivers qualified, have pre trip inspections been completed, are proper markings in place as required, and is a fire extinguisher present?<br>
Tanker and Kettle Operations
-
Is the tanker or kettle properly barricaded to prevent unauthorized access and is the hot pipe properly set up?<br>
-
Is a fully charged fire extinguisher located near the tanker or kettle?
Ladders and Access
-
Is the ladder properly set up and secured and is the general ladder condition ok?<br>
-
Are proper steps in place where elevation changes exceed 19 inches?<br>
-
If using a roof hatch, is the hatch area properly protected?
Fall Protection
-
Are the guardrails properly set up?
-
Are warning line systems properly set up?<br>
-
Are safety monitors properly used?
-
Are all roof openings properly protected?
-
Are personal fall arrest systems properly used?
-
Is overhead protection in place?
Fire Safety
-
Is smoking prohibited in the vicinity of flammable operations and is no smoking signage in place?
-
Is an inspected and properly working fire extinguisher within 50 feet of flammables or 100 feet of general work?
-
Are compressed gas cylinders and other flammables properly stored?
Hazard Communication / GHS
-
Are safety data sheets available?
-
Are all product containers properly labeled?
-
Are all employees trained in GHS?
Personal Protective Equipment
-
Is proper PPE being worn by all employees on site?
-
Are there any other PPE issues (respiratory, hearing, body protection)
Electrical Safety
-
Are all cords and tools undamaged and properly grounded <br>
-
Are incoming power lines protected?
-
Is GFCI being used?
General Safety and Health Provisions
-
Is housekeeping sufficient?<br>
-
Are properly stocked first aid kits available onsite?
-
Are on-site rest rooms available
-
Is drinking water available?
-
Are there any silica, asbestos, or lead issues?<br>
Power and Hand Tools
-
Are the proper tools being used for the job?
-
Is proper guarding in place on tools and equipment?
Scaffolding
-
Has the scaffolding been properly assembled, inspected and does it have proper access?
Foreman Review
-
Foreman Name: