Title Page
-
Crew Leader
-
Personnel on Work Site
-
Date / Time
-
Prepared by
-
Location of Field Visit
-
Work Being Preformed
-
Equipment on Site
Job Planning
-
Crew Leader On Site
-
Job Briefing Completed and Signed By Employee's
-
Alternative Energy Source Identified(Wind Solar, etc.)
-
Crew Size Adequate for Job
-
Terrain Conditions
-
Weather Conditions
Personal Protective Equipment
-
Eye Protection
-
Hard Hats Worn According to Procedure and Manual Requirements?
-
Use of Proper hand Protection?
-
Rubber Gloves and Sleeves(If Applicable) Worn Cradle to Cradle, Lock to Lock, All Material in Good Condition and tested prior to each use?
-
Hearing Protection In Uses as Needed?
-
Proper Bucket Fall Protection Use and Good Storage practices?
Vehicles, Trailers, Specialty Equipment
-
Booms Clean
-
Pre-Flight Controls
-
Control Levers Marked
-
Wheels Chocked
-
Outrigger Pads in Use
-
Vehicles and Equipment Grounded per Safety Manual
-
Crew Members have Rubber Gloves Located Outside of Truck for Possible Bucket Rescue
Climbing
-
Tool Inspection and Inventory Before Climbing
-
Long Sleeve Shirt Worn While Climbing
-
Hand Line In Use
-
Proper Fall Restraint Use When Climbing Wooden Structures
Overhead Construction / Maintenance
-
Are All Lines Properly De-Energized, Tested and Grounded per Safety Manual
-
Hold Cards in Place and Signed
-
All Grounds in Good Working Condition
-
Handlines in Use
-
Crews Maneuvering Loads in Safe Manner.(Proper Lifting Chains/Slings)
-
Good Housekeeping
Energized Work
-
Gloves and Sleeves, Proper Class / Test Dates
-
Gloves Air Tested/ Visually Inspected Prior to Use
-
Minimum Approach Distance Being Maintained
-
"Hot Work" Is There an Observer
General
-
Are Slings, Hand tools, Hoist, Grips, Hand lines and All Other Tools in Good Working Condition
-
Required PPE In use When Operating a Chainsaw
Work Site Set Up
-
Use of High Visibility Vests/Clothing as required
-
Good truck and Equipment Set Up
-
Proper Set up and Road Signs Used to Control Traffic
-
Proper use of Cones for Traffic Control
-
Flagger Used When Needed / Flagging Done Properly
-
Four Way Flashers in Use
-
Strobe Lights in Use
URD Work
-
Competent Person on the Job Site
-
All Excavations Evaluated and Safe
-
Trench Protection
-
Means of Egress in Trench
-
Spoils 2ft From Trench
-
Approved Methods and Lifting Slings in Use When Lifting URD Equipment(Transformers, Switchgear, Peds.)
Live Line Tools
-
Clean / Free of Moisture
-
Stored Properly
-
Hot Line Tool Test Date
-
Troy Dahl