Inspection

CLINIC NAME AND SURGERY

CHAIR TYPE SERIAL NUMBER AND YEAR

DELIVERY SERIAL NUMBER AND YEAR

Add media
CHAIR

Check operation of chair lift, tilt and programming functions with touchpad (if fitted) and foot switch (if fitted) operation and advise on repair/ replacement where required.

Check upholstery condition of chair base, backrest and headrest.

Check and adjust headrest tensions.

Check for irregular noises.

Replace air and water filters with new. (1443436)

Check and adjust incoming air and water pressure if required.

Check for air and water leaks.

Check for air and water leaks.

Check for damaged, brittle or stiff tubing.

Check all arm pivot points for correct tension, adjusting where necessary.

Check Bowl rinse and cup fill functionality and run on time to be sufficient.

Clean spittoon drain where required.

Check functionality of Durr spittoon valve where fitted. Remove and clean yellow filter.

Remove and clean suction separator where fitted. Replace 1 way drain seal. (1434245)

FOOT CONTROL

Check correct functionality of foot control.

Replace Battery

ASSISTANT ELEMENT

Replace HVE and Salving Ejector hose connection o-rings then check for correct operation. (7038391)

Check correct functionality of suction activation micro switches.

Check appearance and functionality of HVE and Saliva Ejector handpieces

Check condition of suction tubings and replace if required.

DELIVERY SYSTEM

Check oil/water accumulation in exhaust catcher, replace exhaust filter and clean.

Check for damage, brittle or stiff tubings.

Check for anti-retraction operation.

Replace Triplex style centre isolation oring and check functionality. (DCI-2255)

Check whip arm movement and re-align where necessary.

Check fibre optic voltages and adjust if necessary.

Check and recalibrate Handpiece pressures to manufactures standards.

OPERATING LIGHT

Check for correct operation of light.

Check with clinician if a spare lamp is present in their stock.

Check intensity switch operation.

Check and ,if necessary, adjust tension for vertical movement of light arm. Advised if strut requires replacement.

Check and, if necessary, adjust tension for each axis of rotational movement of light head assembly.

VACUUM SYSTEM

Check that a recommended vacuum system cleaner is being used and advise as necessary.

OTHER

Check dental unit saftey switch functionality.

Check and adjust levels of trays, delivery unit and arms.

Instruct staff on correct maintenance and operation if required.

Check for waste leaks from vacuum and/or cuspidor drain lines and advise on repair where necessary.

Check condition of Handpiece coupling o-rings and advise on repair necessary.

Check and instruct on self contained water system cleaning protocol and ensure correct use.

Report on repairs as deemed necessary and quote where required.

Ensure Treatment Centre for Correct Functionality at End of Service (Air/ Water/ Electrics turned on, Handpieces, Suction & OP Light working correctly)

FOLLOW UP WORK REQUIRED:

Add media

EXTRA WORK PERFORMED:

Add media

EXTRA PARTS USED:

Add media
TECHNICIAN SIGNATURE:
NEXT SERVICE DUE:
Please note that this checklist is a hypothetical example and provides basic information only. It is not intended to take the place of, among other things, workplace, health and safety advice; medical advice, diagnosis, or treatment; or other applicable laws. You should also seek your own professional advice to determine if the use of such checklist is permissible in your workplace or jurisdiction.