Tool Check List - Downer 2023 - Version 1

• Conducted on

  Date

• Conducted by

• Location
  Address

• Company Name

• Tech Lead

• Vehicle Model

• Vehicle registration Number

• WOF

• Vehicle registration

Mandatory Tools

• Air Compressor (Must be oilless) with water trap. 8 bar 15Ltr min flow rate (ND0533) 10bar max

  Y

  N

• Air hose with tap and air gauge (set up in ND0558 2.6.1)

  Y

  N

• Cable Guard ( safe management of air hose across footpath)

  Y

  N

• Power Generator/Invertor

  Y

  N

• Heavy Duty Power Extension Lead

  Y

  N

• Blowing Gun Chorus Approved

  Y

  N

• 100m Push Rod (6mm) with metal end in good condition

  Y

  N

• Concrete Saw Blade 10mm with carriage

  Y

  N

• Plastic Water Container 20L

  Y

  N

• Cones 900mm high with reflectors (8 Required)

  Y

  N

• Barriers reflective (8 required)

  Y

  N

• Pedestrian Signs (For cone mounting)(min 2)

  Y

  N

• Turfing spade

  Y

  N

• Ground sheet (spoil capture) X 2

  Y

  N

• Trenching Shovel Long Handle

  Y

  N

• Rake Steel

  Y

  N

• Trench Tamper Rammer

  Y

  N

• Brush Broom

  Y

  N

• Crow bar

  Y

  N

• Hand trencher/Mattock

  Y

  N

• Measuring wheel

  Y

  N

• Measuring tape

  Y

  N

• Sediment spill kit

  Y

  N

• Manhole Keylifter Combination Lifter

  Y

  N

• Manhole Lifter to fit all Chorus Plant

  Y

  N

• Tent and tent frame/pop up tent (closure portection)

  Y

  N

• Hammer Claw 20oz

  Y

  N

• Hack saw/Conduit cutter

  Y

  N

• Screw Driver Set

  Y

  N

• Crimping Tool UR/UY/UG Scotch Locks

  Y

  N

• Culking Gun (For Gel/silicone seal)

  Y

  N

• Microduct cutter single way (with sharp blade)

  Y

  N

• Multiduct ratchet cutter (for cutting through multiduct)

  Y

  N

• Double sheath cutter (26 way longitudinal duct cutter) depth control

  Y

  N

• Multiduct ring cutter (single sheath cutter)

  Y

  N

• ABFU sheath stripper (Chorus approved)

  Y

  N

• Tri Wing screwdriver

  Y

  N

• Punch Down Tool 110

  Y

  N

• Krone tool

  Y

  N

• Test phone

  Y

  N

• 14mm socket for F9 chamber bolts

  Y

  N

• 7/16 socket for Hand Holes and Pedestals

  Y

  N

• HW1 steel wheel for slot trench joint filler compaction (CNSP for all slot trenching)

  Y

  N

• HW1 "T" tool or square mouth shovel for installing slot joint filler (CNSP)

  Y

  N

• Heat gun (suitable for blox100 and microduct sealing)

  Y

  N

• Fibre Sharps disposal can

  Y

  N

• Fibre waste bucket

  Y

  N

• Fibre Inspection Probe (FIP Tester)

  Y

  N

• Fibre connector cleaner (Chorus approved)

  Y

  N

• Power Meter (JDSU preferred)

  Y

  N

• Fibre Fusion Splicer (Chorus CNSP approved/calibrated)

  Y

  N

• Fibre cleaver (CNSP approved)

  Y

  N

• Fibre optic stripper 250m/900m (Chorus Approved)

  Y

  N

• Kevlar scissors

  Y

  N

• CVLS (Chorus Visual Light Source)(CNSP approved)

  Y

  N

• Ptouch label machine (with UV labels - White Label with black Lettering)

  Y

  N

• Drill hand held (18v min cordless )

  Y

  N

• Drill Impact hammer drill

  Y

  N

• Drill Bits Selection for wood drilling

  Y

  N

• Drill Bits Selection for concrete/ masonary

  Y

  N

• Bosch Power detector/locator OR similar (simple hand stick not acceptable)

  Y

  N

• Step ladder

  Y

  N

• 6 metre extention ladder

  Y

  N

• Bandit strapping tool (pole strapping on concrete poles)

  Y

  N

• Pole top bag canvas

  Y

  N

• Harness suitable for pole work

  Y

  N

• Pole safety belt (Lanyard)

  Y

  N

• Fire Retardent Overalls (Minimum 8.3 Cals)

  Y

  N

• First Aid kit

  Y

  N

• Hi Vis Jacket (acceptable condition)

  Y

  N

• Hard Hat with Chin Strap (acceptable condition)

  Y

  N

• Safety Glasses (acceptable condition)

  Y

  N

• Ear Muffs

  Y

  N

• Gloves Leather (acceptable condition)

  Y

  N

• Steel cap boots with laces above ankle. (acceptable condition)

  Y

  N

• Chorus compliant vehicle with approved branding on Vehicle

  Y

  N

• Selection of side cutters and wireman pliers (can be purchased in a set)

  Y

  N

• Torch or headlight when working in roofspace or under floor space

  Y

  N

• Bending springs 20mm and 25mm

  Y

  N

• Smaller hammer for cable saddles

  Y

  N

• Hole saw or Jab saw for cutting holes in GIB

  Y

  N

• Handi vac to remove GIB dust

  Y

  N

• Rope or ratchet tiedowns to secure ladder on pole or against building

  Y

  N

• Dust masks

  Y

  N

• Fire extinguisher

  Y

  N

• Stud finder. Should be able to detect power as well

  Y

  N

Additional tools/plant available locally same working day

• Sledge Hammer 10LB concrete breaking

  Y

  N

• Mechanical concrete breaker

  Y

  N

• Wet vac suitable for mud and concrete slurry

  Y

  N

• SDS drill with selection of bits and chisels

  Y

  N

• Renovator type tool for accessing conduit

  Y

  N

• Utility service locator (cable locator)

  Y

  N

• Cable height measuring device

  Y

  N

  Downer Use

• Guards for covering excavations overnight

  Y

  N

  Downer Use

• Grundamat/thruster

  Y

  N

  Downer Use

• Gas Detector

  Y

  N

  Downer Use

• Rubber electrical safety mat

  Y

  N

  Downer Use

• Portable bilge pump

  Y

  N

  Hire

• Mechanical trencher

  Y

  N

  Hire

• Elevated Work Platform (EWP)

  Y

  N

  Hire

Signature of Technician

• Add signature

  Sign