Tower Crane Daily Operator Checklist

Use this template to inspect a tower crane before, during and after work shifts. Begin by conducting pre-operation checks by recording work permits issued, evaluate operator’s competency and check emergency controls. Next, inspect the components of the crane by capturing photo defects and observe if safety measures were applied. Lastly, assess the post job operation to ensure that the crane is safely unattended. Provide final recommendations during end of shift to improve crane safety.

Title Page

Crane Serial #
Client / Site
Location
Conducted on
Prepared by

Pre-operation

Crane is registered and permitted to be used in operations
Take a photo of work permit
Operator is in good condition and is competent to perform the work
Operating and emergency controls are in place
Wire ropes are free from damages
REFERENCE: Wire Rope in good condition
[This is an example of how you can use iAuditor to include reference images in your templates to assist with inspections]
Brakes are in a good condition
Safety switches and interlocks, including limiting and indicating devices were properly installed
Structure has undergone visual inspection
Loading capacity is suitable for materials to be lifted
Workplace condition is free from hazards
Lifting components have all required markings
Away from overhead electrical lines
Activities are supervised by a competent person
Components are assembled in the correct sequence
Edge protection systems are in place
Travel restraint systems are in place
Fall-arrest harness systems are in place
Proper PPE is worn by workers

Job In-Progress

Radio communication, including dedicated radio frequency, equipment checks, clear and constant-talk communication and procedures for loss of signal were implemented
Proper hand signalling are used
Crane has load indicating device for overloading
Crane has motion indicator to avoid moving outside radius
Lifting gear is of adequate capacity, in good condition and marked with relevant information
Access to the crane cabin is safe

Post job

Crane is secured to prevent unauthorized use before leaving
Load were removed from the hook
Hook was raised to a safe position
Powered motions are all disabled
Keys are removed from crane
Crane boom is left to weathervane where there is no risk of the boom contacting other structures
Operator cabin is locked
Machine desk access is restricted