Information
-
Large rolls.
-
Conducted on
-
By
-
Photo required.
Safety devices.
-
Check operation of stop buttons and trip switches.
Visually.
-
Check for damage to covers etc.
-
Check for oil leaks / repair as required.
-
Check control station for damage missing screws etc.
-
Check condition of trip wires.
Control panel and electrics.
-
Check control panel for damage.
-
Check for excess arcing of contractors during operation.
-
Isolate machine.
-
Check cleanliness of panel, clean as required.
-
Check tightness of connections 30%?connections.
-
Check panel wiring for sins of heat or damage.
-
Check condition of cables to all drive motors.
-
Check condition of limit switches
Mechanical.
-
Check hydraulic oil level. Top up as required.
-
Check motor and gearbox fixings.
-
Check bearings for wear.
-
Check rolls for damage / excessive wear.
-
Check yoke tapered bearing and clean off excess dirt and grease.
-
Check condition of hydraulic hoses.
-
Check hydraulic connections are not weeping / leaking.
-
Check grease points and grease as required.<br><br><br>
Final operation check.
-
Check all operations.<br><br><br>