TSCOT Installations - Site Progress Checklist V3

Are the required Trolley Belted Checkout (TSCOTs) are in correct quantities and orientations?

Are the required Stepped End Merchanise Units are in correct quantities?

Are the required Card only Podia (V2/V3) are in correct quantities?

Have all site operatives completed the site induction by Principal Contractor

Have all site operatives completed the compulsory asbestos training required by M&S? (For stores have asbestos rating in Red and Amber)

Are all power and data points in the correct location?

Dimensions check - Are the dimensions of the area correct for the proposed TSCOTs? Including surrounding aisles width after installation

Are all components installed in correct orientations?

Are all distances & aisles width correct between components & surrounding fixtures?

Are all componets installed firmly on ground?

No gap between belts and the side merchandise units?

Are all DN units installed with plinths?

Are all DN unit front doors could open properly without obstructions?

Is Front Merch Line aligned?

Are all sharp edges be polished?

Are all ventilation vent installed properly?

Is the power socket panel installed correctly and connected to power?

Is the Belt installed correctly and operating correctly?

Are all LED logo and strips working properly?

Are all Sensors for belts working properly?

Are all Emergency button working properly?

Are all bumpers firmly attached to the componets?

Are all belts installed with 4 shopping bag hooks undernealth?

Are all gift card holder/bank POP holder in the correct location?

Are all scanner holders in the correct location?

Are all shopping bag clamps working properly?

Are all existing belt dividers from Main Lanes reserved and placed to the new TSCOTS?

Are all finger-trap sensors are adjusted in higher positions?