Title Page
-
Site conducted: Dilkon Medical Center/ DMC
-
Conducted on:
-
Prepared by:
-
Location: Elevator #1- #2; Corridor 01-15-146/ Lobby. Elevator #3 - #4, Corridor 01-10 - 12 / Hallway
Location: Elevator #1 - #2; Corridor 01-15-146 /Lobby
-
Follow site safety procedures and your supervisor instructions.
-
Record and report any equipment damage or Deficiencies found during this maintenance task.
-
Record PM(Preventive Maintenance) results in the CMMS system.
-
Evaluate elevator performance.
-
Verify elevator service is adequate for daily passenger traffic loads.
-
Verify the emergency lighting operates properly.
-
Fixtures: 1) Verify hall and elevator call lights and floor indicators are working properly. 2) Verify overhead lights and ventilation systems are operating properly.
-
Doors: At stops, do doors operate noisily? Are passengers bumped by doors?
-
Starting and stopping: Do elevators hesitate at floors too long after buttons are pressed? Do they start and stop unexpectedly or uncomfortably.
-
Leveling: Does the car level with the floor at each stop so passengers will not trip?
-
Ride: Do you hear squeaks and scrapes or feel vibrations when the elevators are running? Do they feel unbalanced?
-
Verify elevator car room floor, push button panels and handrails are clean.
-
Safety Features: Verify the emergency Alarm bell, Intercom, and Telephone are operating properly.
-
Verify Fire Extinguishers are located covenient to the elevator access doors.
Location: Elevator #3 - #4; Corridor 01- 10- 12/ Hallway<br>
-
Follow site safety procedures and your Supervisor Instructions.
-
Record and report any equipment damage or deficiences found during this Maintenance task.
-
Record PM( Preventive Maintenance) results in the CMMS system.
-
Evaluate Elevator performance.
-
Verify elevator service is adequate for daily passenger traffic loads.
-
Verify the emergency lighting operates properly.
-
FIXTURES: Verify hall and elevator call lights and floor indicators are working properly.
-
FIXTURES: Verify overhead lights and ventilation systems are operating properly.
-
DOORS: At stops, do the doors operate noisily?
-
DOORS: Are passengers bumped by the doors?
-
STARTING & STOPPING: Do elevators hesitate at floors too long after buttons are pressed?
-
STARTING & STOPPING: Do they start unexpectedly or uncomfortably.
-
LEVELING: Does the car level with the floor at each stop so passengers will not trip?
-
RIDE: 1) Do you hear squeaks and scrapes or feel vibrations when the elevators are running? 2) Do they feel unbalanced?
-
Verify elevator car room floor, push button panels & handrails are clean.
-
SAFETY FEATURES: Verify the Emergency Alarm bell, Intercom, and Telephone are operating properly.
-
SAFETY FEATURES: Verify Fire Extinguishers are located convenient to the elevator access doors.