VHIH Overhead Crane Pre-Use Inspection Checklist

• Conducted on

  Date

• Prepared by

• Location
  Address

• Instructions:
  -------------------------------------
  1. Start the Inspection by selecting the type of crane that is going to be inspected and rate each item as "Compliant", "Non- Compliant", "N/A".
  2. Add photos and notes by clicking on the paperclip icon.
  3. To add a Corrective Measure click on the paperclip icon then "Add Action", provide a description, assign to a member, set priority and due date.
  4. Complete audit by providing digital signature.
  5. Share your report by exporting as PDF, Word, Excel or Web Link.
  
  Note: Please report any unusual findings to your Team Leader immediately.

Inspection Items

• Ensure load rating is marked on each side of the crane or hoist and legible from the floor

  Yes

  No

  N/A

• Check that warning labels are clean and legible

  Yes

  No

  N/A

• Check hooks for deformation, cracks, bends, and excessive thread damage

  Yes

  No

  N/A

• Check that the hook safety latch is in place and functioning properly

  Yes

  No

  N/A

• Check hook attachment and securing means

  Yes

  No

  N/A

• Check hoist chains and end connections for excessive wear, twist, distortion interfering with proper function, or stretch

  Yes

  No

  N/A

• Check running rope and end connections for wear, broken strands, etc

  Yes

  No

  N/A

• Check that wires, ropes, and chains are reeved and seated in the drum grooves properly

  Yes

  No

  N/A

• Ensure there are no loose, broken, or damaged parts on the hoist, lever, trolley, bridge, runway, beam clamp, or electric systems

  Yes

  No

  N/A

• Check for deformation of load block, drums, and sheaves

  Yes

  No

  N/A

• Check placement of ends stops

  Yes

  No

  N/A

• Ensure there are no loose items that could fall

  Yes

  No

  N/A

• Verify pendant controls are not damaged (check for damage or missing labels)

  Yes

  No

  N/A

• Ensure all pendant controls are operating properly and moving in the right direction

  Yes

  No

  N/A

• Check all functional operating mechanisms for maladjustment and unusual sounds

  Yes

  No

  N/A

• Check for deterioration or leakage in lines, tanks, valves, drain pumps and other parts of air or hydraulic systems

  Yes

  No

  N/A

• Check hoist, bridge, and trolley braking system for proper operation

  Yes

  No

  N/A

• Ensure trolley and bridge are on-track and functioning smoothly

  Yes

  No

  N/A

• Check for little or no hook drift when releasing controls in the up or down position

  Yes

  No

  N/A

• Ensure the limit devices and switch is functioning properly without a load on the hook

  Yes

  No

  N/A

Comments

• undefined