water service upgrade

• Document No.

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Water meter to house

• Is the water meter above the min ground level hight required by authority.

  Yes

  No

  N/A

• How will you be excavating from meter to dwelling

  By Hand

  By machine

  under road bore.

• What type of services are located in the area of excavation

  Yes

  No

  N/A

• will you contact dial befor you dig for this installation of services?

  Yes

  No

  N/A

• Are you excavating under drive ways?

  Yes

  No

  N/A

• Can the water supply be shut down from right hand meter stop?

  Yes

  No

  N/A

• Have you allowed to replace the lawn sod for the customer?

  Yes

  No

  N/A

• If the water service runs through garden beds has the customer been informed to remove all plants that may be damaged?

  Yes

  No

  N/A

• Are we required to remove excess soil from site?

  Yes

  No

  N/A

• If we are crossing a drive way are we supplying the under road bore.

  Yes

  No

  N/A

The type of material that will be used, and where the material be used

• From the water meter to the dwelling what material will you be using

  Copper tube

  Rehu

  black Polly coil

  UPVC pressure

  shark bite

Water pipes under the dwelling

• Is there adequate room to safely up grade the water service under the dwelling?

  Yes

  No

  N/A

• The material used to construct the water servcie under the dwelling will be.

  Select Copper tube type B Polly tube 25 mm Rehu U P V C pressure shark Bite

  • Copper tube type B
  • Polly tube 25 mm
  • Rehu
  • U P V C
  • pressure
  • shark Bite

• Are there copper water tails to connect to under the floor space?

  Yes

  No

  N/A

• If there are obstructions under the dwelling has the customer been informed to remove obstructions under the dwelling?

  Yes

  No

  N/A

• List the number of points that we are connecting to

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

• Are there galvanised droppers in the water up grade ?

  Yes

  No

  N/A

• Did you allow to replace the bib taps in this estimation?

  Yes

  No

  N/A

Draw a site map of meter location and dwelling

• Draw a site map

  Drawing

Customer information

• Customers to sign

  Sign

• Do you have the customers email address ?

  Yes

  No

  N/A

• How did the customer hear about us

  Email

  returne customer

• Meter connection and stand pipe

  Copper stand pipe bear

  copper stand pipe with meter adaptor and welded elbow 20mm

  using old connection points and stand pipes

• Polly pipe

  1 x 25 Mt Roll

  1 x 50 Mt Roll

  Per meter

• 25 mm Polly to copper adaptors.

  1

  2

  3

  4

• 25 mm Polly to 20 mm M . I

  Select 1 2 3 4 5 6 7 8 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

• 20 mm F.I to 20 mm shark bite adaptors

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• 20 mm x 15 mm x 20 mm shark bite Tee

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• 20 mm shark bite equal Tee

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 15 mm Elbows shark bite

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• 15 mm shark bite to copper push fit strait

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm x 15 mm x 15 mm Tee shark bite

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Shark bite clips 15 mm

  1 bag

  2 bags

• Shark bite clips concert nails 20 mm

  1bag

  2bags

• Shark bite 20 mm pipe 5 Mt long

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Shark Bite 15 mm Pipe 5 mt long

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Shark Bite 20 mm rolls

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Shark Bite 15 mm rolls

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm Copper tube per Length 6 mt.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 15 mm Copper tube per 6 mt. length.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm brass cappilery lugged elbow to 15 mm F.i.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Brass bib tap M.I

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm Copper saddle

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 15 mm Copper saddle

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 1/4 Bag mortar mix

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm double cheque valve

  1

  2

  3

• 20 mm F.I x 20 mm compression elbow brass

  1

  2

  3

• Cappilery 20 mm Tee

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm x 15 mm copper capillary reducer.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm x15 mm x15 mm Copper capillary Tee

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 20 mm copper bend 90

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 15 mm copper capillary 90 bend

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Silver solder 2 % per stick.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• 15 mm compression nuts.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Map gas bottles required for this job.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Oxy and accet welds

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

• Steel wool per pak.

  Select 1 2 3 4 5

  • 1
  • 2
  • 3
  • 4
  • 5

• 20 mm x 15 copper capillary bend.

  Select 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19

• Other parts required for works

  Yes

  No

  N/A