Title Page

  • Site conducted

  • PM Document Number

  • Conducted by

  • Conducted on

Required PPE / Tools / Cleaning material

  • Latex Gloves / Safety Glasses / Safety Shoes / Safety Vest - Tools: Screw Driver / Air blower / Plastic Pry Tools - Chemicals: Rubber Alcohol / Cleaning material: Microfiber Cloth

Clean up procedure following service

  • Check all tools are stored away after PM is completed. Any debris must be picked up from the work area. Inspect PPE for signs of damage. Replace any required PPE as needed.

Zebra Printers PM Checklist

  • Clean and blow the inside of the pirnter with microfiber cloth and air blower.

  • Open the head assembly and check for visible labels jammed on the outfeed rubber roller.

  • Check outfeed rubber roller for proper fitment. Realign if needed.

  • Check and apply rubber alcohol to the print head.

  • Check the cables for condion and proper connecion.

  • Check operation after PM by printing check labels to examine print quality.

  • Inform General Manager or Operation's Manager of any issues found during PM.

Comment section for any findings with "No", "Fail", and/or "Poor" of above checklist - (NA - if no attention is or was needed):

  • undefined

  • Technician Signature:

  • Validated by: (GM, OPs Manager, or Safety Supervisor)

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.