Title Page
-
Document No.
-
Window Installation Review and Testing
-
Project Name
-
Conducted on
-
Prepared by
General Review
-
What is the window plan designation/location?
-
Has the window installation been completed?
-
Attach photos of completed window system.
-
Is interior caulking/sealants installation satisfactory?
-
Add media
-
Is exterior caulking/sealants installation satisfactory?
-
Add media
-
Is sill flashing installed per plans and as detailed in the shop drawings?
-
Add media
-
Is head flashing installed per plans and as detailed in the shop drawings?
-
Add media
Testing
-
Is water or air testing required by the specifications?
-
Does the specified testing standard require water to be sprayed on the window?
-
Has testing been completed?
-
Did the test results pass per the standard?
-
Describe the testing procedures and results.
-
Describe the testing procedures, reason for failure, and plan of correction.
-
Has testing been completed?
-
What was used to spray water on the window and at what PSI?
-
How long was the water sprayed on the window?
-
Did the test results pass per the standard?
-
Was any amount of water visible on the interior of the frame after, or during, the spraying?
-
Provide information about what is suspected to be the point of water entry and plan of correction.
-
Attach photos of water infiltration and any damage.
-
Describe the reason for failure and plan of correction.
-
Attach photos of any damage.
-
Was any amount of water visible on the interior of the frame after, or during, the spraying?
-
Provide information about what is suspected to be the point of water entry.
-
Attach photos of water infiltration and any damage.
-
Is this amount of water allowable per the standard?
-
Describe the reasoning behind this being a passing test.
-
How much water is allowable per the standard?
Parties Involved
-
Installing company representative that witnessed the test:
-
Add signature
-
CMSWillowbrook company representative that witnessed the test:
-
Add signature