30 RU NB Cabinet

• Audit Title

• Document No.

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Shelving

• When totally finished go thru the cabinet and visually check that all is done correctly.

  Yes

  No

  N/A

• Take a photo of cabinet so as to ID for reference

  Yes

  No

  N/A

• Screw self tappers into the bottom frame , 2 each side <br>CT Cabinets only. <br>

  Yes

  No

  N/A

• Check shelf layout with plan , ensure shelves are in correct position <br>

  Yes

  No

  N/A

Patch Panels and 15 Way Frame

• Wire 16 Port Patch Panel with 25 pair and 10 pair .<br>Wire the first 6 Ports of the Patch Panel using the 25 pair cable. <br>Wire the last 10 sockets ,using the 10 pair on pair 4&5 only.

  Yes

  No

  N/A

• Install 15 Way Krone Frame

  Yes

  No

  N/A

• Install the wired 16 Port Patch Panel.<br>Run 25 pair / 10 pair around the back of 15 way frame. And terminate back to "B " side.<br>Ensure Velcro is wrapped around sharp edge.

  Yes

  No

  N/A

• Run Cat 5 from 15 Way frame to 3 rd bottom shelf and fit off a Mode 3 Socket . White 2 - Blue 6 ~~~~~~~ White 1 - Orange 5<br>Ensure it is wired to position 27,28,29,30

  Yes

  No

  N/A

• Install all equipment into bare cabinet these include:-<br>2 x 24 Port Panel <br>Shelving <br>Cable Management <br>

  Yes

  No

  N/A

• Ensure that you allow a 3 rd. Patch Panel to make up 72 Port Patch Panel <br>Cover up this position with a Blanking Plate

  Yes

  No

  N/A

• Label 16 Port Patch Panel.

  Yes

  No

  N/A

• Label 2 nd. Patch Panel 25 to 48

  Yes

  No

  N/A

• Make up record book and fit wire and lug ,install on front door.

  Yes

  No

  N/A

• Jumper 15 Way frame as per Record Book.

  Yes

  No

  N/A

• Test all jumper with Tone set

  Yes

  No

  N/A

• Reinstall front door and side doors. <br>

  Yes

  No

  N/A

Power Rails

• Install 2 x 10 Way Power Rails.<br>Make sure these power are installed in the correct position.<br>Ensuring that they clear any equipment :- follow the shelving layout

  Yes

  No

  N/A

Miscellaneous

• Run 3 mtr Pink Patch Lead from the Second bottom shelf to Switch position

  Yes

  No

  N/A

• Make up stainless steel wire for Record book and front door key.

  Yes

  No

  N/A

• Ensure Key Safe is Programed up to Store Number <br>Ensure override key is inside.<br>Attach key safe to bottom cable management.

  Yes

  No

  N/A

• Install earth bar

  Yes

  No

  N/A

• Tape key to front door.

  Yes

  No

  N/A

• Pack with bubble wrap first ,cardboard then shrink wrap.

  Yes

  No

  N/A

Final Check

• Have a final visual check of the cabinet.

  Yes

  No

  N/A

• Yes

  No

  N/A