Information

  • Principle contractor site Manager

  • Project Manager for this site

  • Toolbox talk carried out by

  • Toolbox talk carried out on

  • Location

Ladders

  • Ladders

    Overview This talk will cover before-use checks, use of ladders and hazards.

    Before-use checks

    1 Ladders must be stored correctly and inspected regularly.
    2 Check for splits or cracks in the stiles and rungs.
    3 Ensure that none of the rungs are missing or loose.
    4 Don’t use painted ladders, this can hide damaged parts.
    5 Report defects, label as defective and remove from site.

    Use of ladders

    1 Work should only be carried out from a ladder when the job is of short duration and can be carried out safely.
    2 Ladders should be set on a firm base and leaning at the correct angle which is one unit out to four units up.
    3 Ladders must be tied near to the top and extend a safe distance above the landing stage, unless a hand –hold is provided.
    4 If it can’t be secured at the top, secure it at the bottom.
    5 For added safety, if possible and necessary, the base of the ladder should be staked or buried to prevent slipping.
    6 Ensure footwear is free from excessive mud or grease before you climb the ladder.
    7 When climbing up or down, use both hands on the stiles. Always face the ladder.
    8 Don’t overreach from a ladder, always move it.
    9 If using extension ladders, each section must overlap.
     2 rungs – for ladders up to 5 metres (closed length)
     3 rungs – for ladders 5-6 metres (closed length).

  • Toolbox talk complete?

  • Now go to section "Toolbox talk attendee register"

Toolbox talk attendee register

  • Toolbox talk attendees -

  • Engineer -
  • Have you fully understood this toolbox talk?

  • Please report to your supervisor to discuss your concerns.

  • Name of engineer -

  • Signature -

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.