Annual Electrical Inspection

• Audit Title

• Client / Site

• Conducted on

  Date

• Prepared by

• Location
  Address

• Personnel

Electrical Inspection

Ground Inspection

• Ensure ground spike is secure

  Yes

  No

  N/A

• Add media

  Media

• Inspect condition of ground wire connected to ground spike

  Yes

  No

  N/A

• Add media

  Media

• Measure resistance value using fluke meter between ground spike and main circuit breaker box and not reading

  Yes

  No

  N/A

• Attach a long mono conductor cable to the ground spike

  Yes

  No

  N/A

• Add media

  Media

• Measure resistance value using fluke meter between the wire attached to ground spike and facility receptacles ground point and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility light switches ground point and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility light fixtures ground point and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility main copper water pipe and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility steel conduit enclosures and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility stainless steel sink top and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and tractor unit and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility steel entry & exit doors and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility steel roller doors and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and facility extension cable ground points and note reading

  Yes

  No

  N/A

• Measure resistance value using fluke meter between the wire attached to ground spike and wireline reel and note reading

  Yes

  No

  N/A

• Any issues or repairs done to the above items must be accurately noted in comments box below

  Yes

  No

  N/A

Receptacle Inspection

• Ensure power has been isolated at correct circuit breaker for this circuit, measure with fluke meter that there is ZERO Vac present

  Yes

  No

  N/A

• Remove receptacle securing screws and inspect

  Yes

  No

  N/A

• Remove any debris from inside the receptacle box

  Yes

  No

  N/A

• Ensure that not bare copper wire can be seen at the conductor wire

  Yes

  No

  N/A

• Ensure that ground wire is connected firmly to ground terminal and receptacle box

  Yes

  No

  N/A

• Ensure that the receptacle is connected in the correct polarity

  Yes

  No

  N/A

• Ensure that all receptacle terminals are firm and tight

  Yes

  No

  N/A

• Install receptacle to box by using correct screws firmly<br>

  Yes

  No

  N/A

• Any issues or repairs done to the above must be accurately noted in comments box below. Any pictures taken must also be entered below

  Yes

  No

  N/A

• Add media

  Media

Light Switch Inspection

• Ensure power has been isolated at the correct circuit breaker for this circuit, measure with fluke meter that there is ZERO Vac present

  Yes

  No

  N/A

• Remove securing screws and inspect

  Yes

  No

  N/A

• Remove any debris from switch box

  Yes

  No

  N/A

• Ensure that no bare copper can be seen at the conductor wire

  Yes

  No

  N/A

• Ensure ground wire is connected to light switch and switch box

  Yes

  No

  N/A

• Ensure all terminal screws are firm and tight

  Yes

  No

  N/A

• Ensure all other connectors are firm and tight

  Yes

  No

  N/A

• Install light switch to switch box using correct screws firmly

  Yes

  No

  N/A

• Any issues or repairs done to the above must be accurately noted in comments box below. Any pictures taken must also be entered below

  Yes

  No

  N/A

• Add media

  Media

Light Fixture Inspection

• Ensure power has been isolated at the correct circuit breaker for this circuit, measure with fluke meter that ZERO Vac is present

  Yes

  No

  N/A

• Remove securing screws and inspect

  Yes

  No

  N/A

• Remove any debris from the light fixture

  Yes

  No

  N/A

• Ensure no bare copper can be seen at the conductor wire

  Yes

  No

  N/A

• Ensure ground wire is connected to fixture and fixture box

  Yes

  No

  N/A

• Ensure all terminal screws are firm and tight

  Yes

  No

  N/A

• Ensure all other connectors are firm and tight

  Yes

  No

  N/A

• Ensure that correct wattage lamps/bulbs are connected to fixture

  Yes

  No

  N/A

• Secure light fixture to fixture mounting with correct screws firmly

  Yes

  No

  N/A

• Any issues or repairs done to the above must be accurately noted in comments box below. Any pictures taken must also be entered below

  Yes

  No

  N/A

• Add media

  Media

Circuit Breaker Box Inspection

• Ensure breaker box is isolated by turning the MAIN switch OFF

  Yes

  No

  N/A

• Remove circuit breaker box cover and measure with fluke meter that there is ZERO Vac present

  Yes

  No

  N/A

• Position all individual circuit breakers to the OFF position

  Yes

  No

  N/A

• Ensure no bare copper can be seen at the conductor wire

  Yes

  No

  N/A

• Ensure all ground wires are connected firmly to ground terminal

  Yes

  No

  N/A

• Ensure all circuit breaker terminal screws are firm and tight

  Yes

  No

  N/A

• Ensure all other connectors are firm and tight

  Yes

  No

  N/A

• Ensure all individual circuit breaker position to the ON & OFF position freely

  Yes

  No

  N/A

• Replace circuit breaker box cover

  Yes

  No

  N/A

• Ensure all circuit breaker are correctly and clearly marked for the correct circuit

  Yes

  No

  N/A

• Ensure all individual circuit breakers are in the off position

  Yes

  No

  N/A

• Turn MAIN switch to circuit breaker box ON

  Yes

  No

  N/A

• Turn individual circuit breakers to the ON position

  Yes

  No

  N/A

• Check that all circuits are working correctly

  Yes

  No

  N/A

• Any issues or repairs done to the above must be accurately noted in comments box below. Any pictures taken must also be entered below

  Yes

  No

  N/A

• Add media

  Media

• Signature Of Competent Person Carrying Out The Above

  Sign