AS1926.1-1993 - Bare - SafetyCulture

Owners Detail

Owners Name
Owners Address
Owners Phone Number
Owners Email Address

Pool Detail

Inspection Address
Council
Type of Swimming Pool/Spa
- Permanent Pool
- Permanent Spa
- Relocatable Spa
- Relocatable Pool
- Above Ground Pool
- Indoor Pool
- Indoor Spa
- Permanent Pool/Spa
Date of Construction
Applicable Australian Standard
Type of Inspection
Date of Inspection

Immediate Threat

Q1 Is any part of the Barrier less than 1 metre in height when measured above ground level from the approach side?
Q2 Is there a door or gate that doesn't completely close?
Q3 Is there a door or gate that can be opened by a person who is unable to reach the opening mechanism for that door or gate?

Gates

Gate 1

Gate 1
Q1 Does the gate have an effective height of minimum 1200mm at any point along the outside of the gate?
The gate is less than 1200mm in height and will need to be raised in height
There are objects near the gate that reduces the effective height of 1200mm
Q2 Does the gate that provides access to the pool area swing outwards and away from the pool area?
The gate does not swing away from the pool and must be re installed to swing away from the pool
There are objects possibly used to prop open the gate and must be removed
Q3 Is the gate fitted with a self-latching device that will automatically operate when closing the gate and also prevents the gate from being reopened without being manually released?
The latch does not latch on rest position
The latch does not latch when gate returns to close position
The latch is intermittent and does not always operated must me replaced
The latch is siezed and must be replaced
Q4 Is the latch located not less than 1500mm from the finished ground level?
The latch is less than 1500mm in height latch to be raised
The latch is not fit for purpose and will need to be replaced
Q5 If the latching device and/or the latch itself is located less than 1500mm above the finished ground level, then is the latching device and its release shielded so that no opening is greater than 10mm and is at least 150mm below the top of the gate on the pool side?
The gap between the fixed panel or post to the gate is more than 10mm and must be reduced to be less than 10mm
The shield around the latch must be a minimum of 450mm radius around the latch
The latch must be 150mm below the top of the gate on the pool side
Q6 Does the gate have a self closing device fitted and operates in all positions
Hinges on the gate are broken, loose or require adjustment
Does not close from the resting position
Does not close from any position
Q7 Is the gap that is located under the gate or fence less than 100mm?
Gap below the gate is more than 100mm in height must be reduced
Ground below gate is not stable enough ang may be washed away to be replaced with table ground
Vertical members less than 100mm
Q8 Highest lowest member greater than 1100mm to the top of gate
The lower hinge is less than 1100mm
Horizontal fence component is less than 1100mm
Q9 If openings are greater than 10mm in fence, then are there any climbable objects within 300mm of the internal side of the barrier?
There is furniture within 300mm of the inside of the barrier that can facilitate climbing
There are pot plants within 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects within 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q10 Is the quadrant of radius with a clear span of least 1200mm from the top of the fence clear of any climbable objects?
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are objects on the fence that can facilitate climbing
There are pot plants that will need to be removed
There is furniture that will need to be removed, this may facilitate climbing
Q11 Is there any objects on the gate that are less than 900mm apart and the indentations and projections are more than 10mm?
Hinges on the gate are greater than 10mm and within 900mm of each other can facilitate climbing
Rails on the gate that are within 900mm and greater than 10mm can facilitate climbing
Q12 When the gate is closed and/ or latched and is lifted upwards or pushed downwards with a force of 250N (25kg) movement, the gate does not unlatch
Post of the gate is loose and will need to be rectified
Hinges on the gate are loose
Brackets on the gate are loose

Gate 2

Gate 2
Q1 Does the gate have an effective height of minimum 1200mm at any point along the outside of the gate?
The gate is less than 1200mm in height and will need to be raised in height
There are objects near the gate that reduces the effective height of 1200mm
Q2 Does the gate that provides access to the pool area swing outwards and away from the pool area?
The gate does not swing away from the pool and must be re installed to swing away from the pool
There are objects possibly used to prop open the gate and must be removed
Q3 Is the gate fitted with a self-latching device that will automatically operate when closing the gate and also prevents the gate from being reopened without being manually released?
The latch does not latch on rest position
The latch does not latch when gate returns to close position
The latch is intermittent and does not always operated must me replaced
The latch is siezed and must be replaced
Q4 Is the latch located not less than 1500mm from the finished ground level?
The latch is less than 1500mm in height latch to be raised
The latch is not fit for purpose and will need to be replaced
Q5 If the latching device and/or the latch itself is located less than 1500mm above the finished ground level, then is the latching device and its release shielded so that no opening is greater than 10mm and is at least 150mm below the top of the gate on the pool side?
The gap between the fixed panel or post to the gate is more than 10mm and must be reduced to be less than 10mm
The shield around the latch must be a minimum of 450mm radius around the latch
The latch must be 150mm below the top of the gate on the pool side
Q6 Does the gate have a self closing device fitted and operates in all positions
Hinges on the gate are broken, loose or require adjustment
Does not close from the resting position
Does not close from any position
Q7 Is the gap that is located under the gate or fence less than 100mm?
Gap below the gate is more than 100mm in height must be reduced
Ground below gate is not stable enough ang may be washed away to be replaced with table ground
Vertical members less than 100mm
Q8 Highest lowest member greater than 1100mm to the top of gate
The lower hinge is less than 1100mm
Horizontal fence component is less than 1100mm
Q9 If openings are greater than 10mm in fence, then are there any climbable objects within 300mm of the internal side of the barrier?
There is furniture within 300mm of the inside of the barrier that can facilitate climbing
There are pot plants within 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects within 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q10 Is the quadrant of radius with a clear span of least 1200mm from the top of the fence clear of any climbable objects?
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are objects on the fence that can facilitate climbing
There are pot plants that will need to be removed
There is furniture that will need to be removed, this may facilitate climbing
Q11 Is there any objects on the gate that are less than 900mm apart and the indentations and projections are more than 10mm?
Hinges on the gate are greater than 10mm and within 900mm of each other can facilitate climbing
Rails on the gate that are within 900mm and greater than 10mm can facilitate climbing
Q12 When the gate is closed and/ or latched and is lifted upwards or pushed downwards with a force of 250N (25kg) movement, the gate does not unlatch
Post of the gate is loose and will need to be rectified
Hinges on the gate are loose
Brackets on the gate are loose

Gate 3

Gate 3
Q1 Does the gate have an effective height of minimum 1200mm at any point along the outside of the gate?
The gate is less than 1200mm in height and will need to be raised in height
There are objects near the gate that reduces the effective height of 1200mm
Q2 Does the gate that provides access to the pool area swing outwards and away from the pool area?
The gate does not swing away from the pool and must be re installed to swing away from the pool
There are objects possibly used to prop open the gate and must be removed
Q3 Is the gate fitted with a self-latching device that will automatically operate when closing the gate and also prevents the gate from being reopened without being manually released?
The latch does not latch on rest position
The latch does not latch when gate returns to close position
The latch is intermittent and does not always operated must me replaced
The latch is siezed and must be replaced
Q4 Is the latch located not less than 1500mm from the finished ground level?
The latch is less than 1500mm in height latch to be raised
The latch is not fit for purpose and will need to be replaced
Q5 If the latching device and/or the latch itself is located less than 1500mm above the finished ground level, then is the latching device and its release shielded so that no opening is greater than 10mm and is at least 150mm below the top of the gate on the pool side?
The gap between the fixed panel or post to the gate is more than 10mm and must be reduced to be less than 10mm
The shield around the latch must be a minimum of 450mm radius around the latch
The latch must be 150mm below the top of the gate on the pool side
Q6 Does the gate have a self closing device fitted and operates in all positions
Hinges on the gate are broken, loose or require adjustment
Does not close from the resting position
Does not close from any position
Q7 Is the gap that is located under the gate or fence less than 100mm?
Gap below the gate is more than 100mm in height must be reduced
Ground below gate is not stable enough ang may be washed away to be replaced with table ground
Vertical members less than 100mm
Q8 Highest lowest member greater than 1100mm to the top of gate
The lower hinge is less than 1100mm
Horizontal fence component is less than 1100mm
Q9 If openings are greater than 10mm in fence, then are there any climbable objects within 300mm of the internal side of the barrier?
There is furniture within 300mm of the inside of the barrier that can facilitate climbing
There are pot plants within 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects within 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q10 Is the quadrant of radius with a clear span of least 1200mm from the top of the fence clear of any climbable objects?
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are objects on the fence that can facilitate climbing
There are pot plants that will need to be removed
There is furniture that will need to be removed, this may facilitate climbing
Q11 Is there any objects on the gate that are less than 900mm apart and the indentations and projections are more than 10mm?
Hinges on the gate are greater than 10mm and within 900mm of each other can facilitate climbing
Rails on the gate that are within 900mm and greater than 10mm can facilitate climbing
Q12 When the gate is closed and/ or latched and is lifted upwards or pushed downwards with a force of 250N (25kg) movement, the gate does not unlatch
Post of the gate is loose and will need to be rectified
Hinges on the gate are loose
Brackets on the gate are loose

Gate 4

Gate 4
Q1 Does the gate have an effective height of minimum 1200mm at any point along the outside of the gate?
The gate is less than 1200mm in height and will need to be raised in height
There are objects near the gate that reduces the effective height of 1200mm
Q2 Does the gate that provides access to the pool area swing outwards and away from the pool area?
The gate does not swing away from the pool and must be re installed to swing away from the pool
There are objects possibly used to prop open the gate and must be removed
Q3 Is the gate fitted with a self-latching device that will automatically operate when closing the gate and also prevents the gate from being reopened without being manually released?
The latch does not latch on rest position
The latch does not latch when gate returns to close position
The latch is intermittent and does not always operated must me replaced
The latch is siezed and must be replaced
Q4 Is the latch located not less than 1500mm from the finished ground level?
The latch is less than 1500mm in height latch to be raised
The latch is not fit for purpose and will need to be replaced
Q5 If the latching device and/or the latch itself is located less than 1500mm above the finished ground level, then is the latching device and its release shielded so that no opening is greater than 10mm and is at least 150mm below the top of the gate on the pool side?
The gap between the fixed panel or post to the gate is more than 10mm and must be reduced to be less than 10mm
The shield around the latch must be a minimum of 450mm radius around the latch
The latch must be 150mm below the top of the gate on the pool side
Q6 Does the gate have a self closing device fitted and operates in all positions
Hinges on the gate are broken, loose or require adjustment
Does not close from the resting position
Does not close from any position
Q7 Is the gap that is located under the gate or fence less than 100mm?
Gap below the gate is more than 100mm in height must be reduced
Ground below gate is not stable enough ang may be washed away to be replaced with table ground
Vertical members less than 100mm
Q8 Highest lowest member greater than 1100mm to the top of gate
The lower hinge is less than 1100mm
Horizontal fence component is less than 1100mm
Q9 If openings are greater than 10mm in fence, then are there any climbable objects within 300mm of the internal side of the barrier?
There is furniture within 300mm of the inside of the barrier that can facilitate climbing
There are pot plants within 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects within 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q10 Is the quadrant of radius with a clear span of least 1200mm from the top of the fence clear of any climbable objects?
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are objects on the fence that can facilitate climbing
There are pot plants that will need to be removed
There is furniture that will need to be removed, this may facilitate climbing
Q11 Is there any objects on the gate that are less than 900mm apart and the indentations and projections are more than 10mm?
Hinges on the gate are greater than 10mm and within 900mm of each other can facilitate climbing
Rails on the gate that are within 900mm and greater than 10mm can facilitate climbing
Q12 When the gate is closed and/ or latched and is lifted upwards or pushed downwards with a force of 250N (25kg) movement, the gate does not unlatch
Post of the gate is loose and will need to be rectified
Hinges on the gate are loose
Brackets on the gate are loose

Barriers

Barrier 1

Barrier 1
Type of material used for fence
- Brick
- Metal
- Paling/Timber
- Glass
- Pool/Spas Wall
- Other
Q1 Fence has an effective height of minimum 1200mm at any point along the length of the fencing – measured from the outside.
The fence is less than 1200mm in height and will need to be raise
There are object in front of the fence that reduces the height of the fence
Q2 Quadrant of radius with a clear span of least 1200mm from the top of the fence and must be clear from any climbable objects
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are object on the fence that can facilitate climbing
There are pot plants that will need to be removed
There are objects on the fence that can facilitate climbing
Q3 If the spacing of the vertical elements is greater than 10 mm and within 300mm, of the barrier it can not be climbable
There is furniture with 300mm of the inside of the barrier that can facilitate climbing
There are pot plants with 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects with 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q4 Projections/indentations are not deeper than 10mm unless they are located 900mm apart and that the lower of any projections is 1.1m from the top of the fencing.
Lowest highest member is less than 1100mm to the top of the fence
Fence component is less than 1100mm to the top of the fence
Object on the fence reduces the minimum height of 1100mm to the top of the fence
Q5 Where vertical members are greater than 10mm , then the horizontal members must be 900mm apart. Where there are two or more horizontal members, the 900mm is measured from the highest lower horizontal member.
Q6 Gaps between the bottom of the fencing and the finished ground level does not exceed 100mm
The bottom of the fence is more than 100mm in height and must be reduced to be less than 100mmm
There is unstable ground below the fence that may be washed away and must be replaced with stable ground
Q7 Gaps between all vertical rails on the fence and gate must be less than 100mm
Vertical gaps are greater than 100mm and must be reduced to be less than 100mm

Barrier 2

Barrier 2
Type of material used for fence
- Brick
- Metal
- Paling/Timber
- Glass
- Pool/Spas Wall
- Other
Q1 Fence has an effective height of minimum 1200mm at any point along the length of the fencing – measured from the outside.
The fence is less than 1200mm in height and will need to be raise
There are object in front of the fence that reduces the height of the fence
Q2 Quadrant of radius with a clear span of least 1200mm from the top of the fence and must be clear from any climbable objects
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are object on the fence that can facilitate climbing
There are pot plants that will need to be removed
There are objects on the fence that can facilitate climbing
Q3 If the spacing of the vertical elements is greater than 10 mm and within 300mm, of the barrier it can not be climbable
There is furniture with 300mm of the inside of the barrier that can facilitate climbing
There are pot plants with 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects with 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q4 Projections/indentations are not deeper than 10mm unless they are located 900mm apart and that the lower of any projections is 1.1m from the top of the fencing.
Lowest highest member is less than 1100mm to the top of the fence
Fence component is less than 1100mm to the top of the fence
Object on the fence reduces the minimum height of 1100mm to the top of the fence
Q5 Where vertical members are greater than 10mm , then the horizontal members must be 900mm apart. Where there are two or more horizontal members, the 900mm is measured from the highest lower horizontal member.
Q6 Gaps between the bottom of the fencing and the finished ground level does not exceed 100mm
The bottom of the fence is more than 100mm in height and must be reduced to be less than 100mmm
There is unstable ground below the fence that may be washed away and must be replaced with stable ground
Q7 Gaps between all vertical rails on the fence and gate must be less than 100mm
Vertical gaps are greater than 100mm and must be reduced to be less than 100mm

Barrier 3

Barrier 3
Type of material used for fence
- Brick
- Metal
- Paling/Timber
- Glass
- Pool/Spas Wall
- Other
Q1 Fence has an effective height of minimum 1200mm at any point along the length of the fencing – measured from the outside.
The fence is less than 1200mm in height and will need to be raise
There are object in front of the fence that reduces the height of the fence
Q2 Quadrant of radius with a clear span of least 1200mm from the top of the fence and must be clear from any climbable objects
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are object on the fence that can facilitate climbing
There are pot plants that will need to be removed
There are objects on the fence that can facilitate climbing
Q3 If the spacing of the vertical elements is greater than 10 mm and within 300mm, of the barrier it can not be climbable
There is furniture with 300mm of the inside of the barrier that can facilitate climbing
There are pot plants with 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects with 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q4 Projections/indentations are not deeper than 10mm unless they are located 900mm apart and that the lower of any projections is 1.1m from the top of the fencing.
Lowest highest member is less than 1100mm to the top of the fence
Fence component is less than 1100mm to the top of the fence
Object on the fence reduces the minimum height of 1100mm to the top of the fence
Q5 Where vertical members are greater than 10mm , then the horizontal members must be 900mm apart. Where there are two or more horizontal members, the 900mm is measured from the highest lower horizontal member.
Q6 Gaps between the bottom of the fencing and the finished ground level does not exceed 100mm
The bottom of the fence is more than 100mm in height and must be reduced to be less than 100mmm
There is unstable ground below the fence that may be washed away and must be replaced with stable ground
Q7 Gaps between all vertical rails on the fence and gate must be less than 100mm
Vertical gaps are greater than 100mm and must be reduced to be less than 100mm

Barrier 4

Barrier 4
Type of material used for fence
- Brick
- Metal
- Paling/Timber
- Glass
- Pool/Spas Wall
- Other
Q1 Fence has an effective height of minimum 1200mm at any point along the length of the fencing – measured from the outside.
The fence is less than 1200mm in height and will need to be raise
There are object in front of the fence that reduces the height of the fence
Q2 Quadrant of radius with a clear span of least 1200mm from the top of the fence and must be clear from any climbable objects
There are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate Climbing
There are object on the fence that can facilitate climbing
There are pot plants that will need to be removed
There are objects on the fence that can facilitate climbing
Q3 If the spacing of the vertical elements is greater than 10 mm and within 300mm, of the barrier it can not be climbable
There is furniture with 300mm of the inside of the barrier that can facilitate climbing
There are pot plants with 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects with 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q4 Projections/indentations are not deeper than 10mm unless they are located 900mm apart and that the lower of any projections is 1.1m from the top of the fencing.
Lowest highest member is less than 1100mm to the top of the fence
Fence component is less than 1100mm to the top of the fence
Object on the fence reduces the minimum height of 1100mm to the top of the fence
Q5 Where vertical members are greater than 10mm , then the horizontal members must be 900mm apart. Where there are two or more horizontal members, the 900mm is measured from the highest lower horizontal member.
Q6 Gaps between the bottom of the fencing and the finished ground level does not exceed 100mm
The bottom of the fence is more than 100mm in height and must be reduced to be less than 100mmm
There is unstable ground below the fence that may be washed away and must be replaced with stable ground
Q7 Gaps between all vertical rails on the fence and gate must be less than 100mm
Vertical gaps are greater than 100mm and must be reduced to be less than 100mm

Stepped Barrier

Stepped Barrier
Type of Fence
- Brick
- Metal
- Paling/Timber
- Glass
- Pool/Spas Wall
- Other
Q1 Fence has an effective height of minimum 1200mm at any point along the length of the fencing – measured from the outside.
The fence is less than 1200mm in height and will need to be raise
There are object in front of the fence that reduces the height of the fence
Q2 Quadrant of radius with a clear span of least 1200mm from the top of the fence and must be clear from any climbable objects
The are branches in front of the gate that can facilitate climbing branches to be trimmed back
There is an intersecting fence near the gate that can facilitate climbing
There are objects within the clear span of 1200mm that can facilitate climbing
There are object on the fence that can facilitate climbing
There are pot plants that will need to be removed
There are objects on the fence that can facilitate climbing
Q3 If the spacing of the vertical elements is greater than 10 mm and within 300mm, of the barrier it can not be climbable
There is furniture with 300mm of the inside of the barrier that can facilitate climbing
There are pot plants with 300mm of the inside of the barrier that can facilitate climbing
There are climbable objects with 300mm of the inside of the barrier that can facilitate climbing
Intersecting fence rails need to be covered as the can facilitate climbing
Q4 Projections/indentations are not deeper than 10mm unless they are located 900mm apart and that the lower of any projections is 1.1m from the top of the fencing
Lowest highest member is less than 1100mm to the top of the fence
Fence component is less than 1100mm to the top of the fence
Object on the fence reduces the minimum height of 1100mm to the top of the fence
Q5 Where vertical members are greater than 10mm , then the horizontal members must be 900mm apart. Where there are two or more horizontal members, the 900mm is measured from the highest lower horizontal member.
Q6 Gaps between the bottom of the fencing and the finished ground level does not exceed 100mm
The bottom of the fence is more than 100mm in height and must be reduced to be less than 100mmm
There is unstable ground below the fence that may be washed away and must be replaced with stable ground
Q7 Gaps between all vertical rails on the fence and gate must be less than 100mm
Vertical gaps are greater than 100mm and must be reduced to be less than 100mm

Cranked Barrier

Barrier Cranked

Barrier Cranked
Perforated material must not be between 13mm and no greater than 100mm must have an effective height of no less than 1800mm with a crank of 450mm OR fence to be not less than 2400mm in height

Child resistant window

Window 1

Window 1
Window to be restricted by no more than 100mm OR
The window is at least 900mm from the floor of the room OR
At least 2400mm from paved or ground level OR
Covered by bars or mesh screen OR
If the window is between 900mm and 1200mm can be fitted with securely fitted fly screen

Window 2

Window 2
Window to be restricted by no more than 100mm OR
The window is at least 900mm from the floor of the room OR
At least 2400mm from paved or ground level OR
Covered by bars or mesh screen OR
If the window is between 900mm and 1200mm can be fitted with securely fitted fly screen

Window 3

Window 3
Window to be restricted by no more than 100mm OR
The window is at least 1500mm from the floor of the room OR
At least 2400mm from paved or ground level OR
Covered by bars or mesh screen OR
If the window is between 900mm and 1200mm can be fitted with securely fitted fly screen

Window 4

Window 4
Window to be restricted by no more than 100mm OR
The window is at least 1500mm from the floor of the room OR
At least 2400mm from paved or ground level OR
Covered by bars or mesh screen OR
If the window is between 900mm and 1200mm can be fitted with securely fitted fly screen

Window 5

Window 5
Window to be restricted by no more than 100mm OR
The window is at least 1500mm from the floor of the room OR
At least 2400mm from paved or ground level OR
Covered by bars or mesh screen OR
If the window is between 900mm and 1200mm can be fitted with securely fitted fly screen

Child resistant door set

Door 1

Door 1
Q1 Doors shall be fitted with a self-latching device that will automatically operate on the closing of the door and will prevent the door from being re-opened without manually releasing the device
The door does not self latch
The door latch is not fit for purpose
Q2 Doors shall be fitted with a self-closing device that will return the door to the closed position and operate the latching device from any position with a stationary start without the application of a manual force. The self-closing device shall be capable of complying with these requirements with the door at any position from resting on the latching mechanism to fully open.
Q3 The release for the latching device on the internal (building) side of the door shall be located not less than 1.5 m above the floor
Q4 There shall be no footholds wider than 10 mm on the door or its frame in the area from the release for the latching device down to 100 mm above the floor.
Q5 The closing and latching of the door shall comply with Clause 3.4.
Q7 The door set shall comply with the performance requirements for a gate for strength and rigidity of openings and strength of gate (see Clauses 3.1 to 3.3).

Door 2

Door 2
Q1 Doors shall be fitted with a self-latching device that will automatically operate on the closing of the door and will prevent the door from being re-opened without manually releasing the device
The door does not self latch
The door latch is not fit for purpose
Q2 Doors shall be fitted with a self-closing device that will return the door to the closed position and operate the latching device from any position with a stationary start without the application of a manual force. The self-closing device shall be capable of complying with these requirements with the door at any position from resting on the latching mechanism to fully open.
Q3 The release for the latching device on the internal (building) side of the door shall be located not less than 1.5 m above the floor
Q4 There shall be no footholds wider than 10 mm on the door or its frame in the area from the release for the latching device down to 100 mm above the floor.
Q5 The closing and latching of the door shall comply with Clause 3.4.
Q7 The door set shall comply with the performance requirements for a gate for strength and rigidity of openings and strength of gate (see Clauses 3.1 to 3.3).

Balconies

Balcony
Balcony Heights must be more than 2400mm from the finish ground level or have a child resistant window or door or have a 1200mm balustrade

Additional Pictures

General

Result

Result
Under the Building Regulation, it is mandatory for a Registered Inspector to carry out an inspection for your Pool Barrier against the relevant Australian Standard that the Council has determined. An inspection has been carried out, and the the determination of that inspection has been nominated to be a Rectification Notice 147ZG. Under this Notice the Barrier must be brought up to the relevant standard, please refer to the Inspector's Report attached which outlines the rectifications required. Rectifications are required to be completed within 60 days of the initial inspection date; if rectifications are rectified and meet the relevant standard within 60 days then a reinspection will take place, and if all is rectified a Certificate of Compliance Form 23 will be issued to the Owner which must be sent to Council by the Owner within 30 Days of receiving the Certificate. If the Pool Barrier has not been rectified within 60 days then a 147ZH Notice will be served to the Owner which will give the Owner an additional 7 days to rectify. In the event that the 7 days expires with all rectifications not rectified, then the Inspector MUST send a Certificate of Barrier Non Compliance to the Council; please refer to Council correspondence for ramifications of receiving a Certificate of Barrier Non Compliance.
John Portarianos

Inspectors Details

Registered Building Inspector -
VBA Registration Number -
ABN
Address -
Email -

AS1926.1-1993 - Bare

Go digital today!

Convert your paper checklists into digital forms

Gate 1

Gate 2

Gate 3

Gate 4

Barrier 1

Barrier 2

Barrier 3

Barrier 4

Stepped Barrier

Barrier Cranked

Window 1

Window 2

Window 3

Window 4

Window 5

Door 1

Door 2

Inspectors Details

Related checklists

AS1926.1-1993 - Bare

Free AS1926.1-1993 - Bare Checklist

Go digital today!

Convert your paper checklists into digital forms

Gate 1

Gate 2

Gate 3

Gate 4

Barrier 1

Barrier 2

Barrier 3

Barrier 4

Stepped Barrier

Barrier Cranked

Window 1

Window 2

Window 3

Window 4

Window 5

Door 1

Door 2

Inspectors Details

Related checklists