Title Page
-
Welcome on BF3 frame v1 control checklist.
The purpose of this checklist is to make sure you don't forget any checkpoints when receiving the BF3 frames.
Please make sure to fill in every point even if there is nothing to declare. -
Frame number (use STM number and index A, B, C, ... ex : STM-XXXX-A)
Main informations
-
Controled by
-
Conducted on
-
Supplier Name
-
Supplier Location
General Quality
-
Add front view of the frame for general looking
-
Is the material used of superior quality and meets the required specifications ? (304L Stainless Steel)
-
What is the used material for this frame ?
-
Does the overall appearance of the frame have any signs of damage, deformation, or discoloration ?
-
Is the quality of the finish uniform across the entire surface of the frame ?
-
Are the welds smooth, uniform, and without burrs ?
-
Are the corners and edges uniform and without burrs ?
-
Is the frame well balanced and stable ?
General Controls
Have the global height, width, and depth of the frame been measured to ensure they correspond to the specified dimensions ?
-
Width = 1800 +/- 1 mm
-
Height = 2010 +/- 1 mm
-
Depth = 1120 +/- 1 mm
Does the drawings conform to the final product ? (Make 15 random tubes measurements tol. +/- 1mm)
-
Measure 1
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 2
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 3
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 4
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 5
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 6
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 7
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 8
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 9
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 10
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 11
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 12
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 13
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 14
-
Tube number ?
-
Is this tube have major impact ?
-
Measure 15
-
Tube number ?
-
Is this tube have major impact ?
-
Does the thickness of the stainless steel tubes meet the required specifications ? (4mm)
-
Does the section dimension of the stainless steel tubes meet the required specifications ? (40x40 R 4mm)
Are all holes and threaded holes are well done and correctly positioned ? (Make 10 random measurements tol. +/- 0,5mm)
Threaded holes
-
Threaded hole measure n°1
-
Threaded hole measure n°2
-
Threaded hole measure n°3
-
Threaded hole measure n°4
-
Threaded hole measure n°5
- Pass
- Fail
Smooth holes
-
Smooth hole measure n°1
-
Smooth hole measure n°2
-
Smooth hole measure n°3
-
Smooth hole measure n°4
-
Smooth hole measure n°5
BF3-01-001 - Frame
-
Please give a global view of this sub-assembly
Flatness, squareness and parallelity
-
On axis A support, check the flatness of the tube n°20 and the 4 parts n°44. Is it correctly flatness ?
-
On axis B support, check the flatness of the tube n°17 and between the 3 parts n°41 and n°65. Is it correctly flatness ?
-
On axis C support, are tubes n°72 and n°89 perpendicular to each other?
-
On axis D support, are tubes n°6 and n°15 perpendicular to each other?
-
On the transfer, check to have the same flatness between the part n°53 and parts n°86. Is it correct ?
-
On the feeding, check to have the same flatness between the 2 parts n°56. Is it correct ?
-
On the feeding, check the perpendicular between parts n°56 and n°18 & n°109. Is it correct ?
-
On the feeding, check the perpendicular between parts n°56 and n°98 Is it correct ?
-
On the feeding, check the parallelity between the tubes n°100 and n°36 and plate n°107. Is it parallel ?
-
On the closing, the 2 plates n°104 need to be perpendicular of the tubes n°81 and n°8. Is it correct ?
-
On axis E support, are tubes n°80 and n°81 perpendicular to each other?
-
On the electrical cabinet space, are tubes n°10 and n°81 perpendicular to each other?
-
On the electrical cabinet space, are tubes n°8 and n°83 perpendicular to each other?
-
On axis E support, are tubes n°39 and n°11 is correctly perpendicular to each other ?
-
On axis E support, the 5 plates n°33 is correctly flatness between to each other ?
Holes,Threaded and oblong holes
-
On the store box, the tapping holes of the two parts 61, are they correctly aligned with each other?
-
On the forming box space, the alignment of the holes between the 2 parts n°52. Is it correctly aligned ?
-
On axis A support (tube n°20), check the alignment of the holes between the 4 parts n°44. Is it correctly aligned ?
-
On axis B support (tube n°17), check the alignment of the holes between the 3 parts n°41 and part n°65. Is it correctly aligned ?
-
On axis C support (tube n°89), check the alignment of the holes between the 3 parts n°42. Is it correctly aligned ?
-
On axis D support (tube n°15), check the alignment of the holes between the 3 parts n°43. Is it correctly aligned ?
-
On the transfert, check the alignment of the 4 holes between parts n°53 et n°86. Is it correct ?
-
On the transfert, they are 12 holes with threaded ØM4. Is it present and correctly aligned ?
-
On the feeding, check the alignment of the holes between the 2 parts n°56. Is it correctly aligned ?
-
On the feeding, check the alignment of the holes between the tube n°84 and n°94. Is it correct aligned ?
-
On the closing, the part n°105, does it have the requested 5 holes and the oblong hole ?
-
For door 1, they are 6 holes threaded on the tube n°79. Is it correctly aligned ?
-
For door 2, they are 6 holes threaded on the tube n°71. Is it correctly aligned ?
-
For door 3, they are 4 holes threaded on the tube n°8. Is it correctly aligned ?
-
For door 4, they are 4 holes threaded on the tube n°81. Is it correctly aligned ?
-
On axis E support (tube n°11), check the alignment of the holes between the parts n°33. Is it correctly aligned ?
BF3-01-002 - Tube cables trays
-
Is all this part is present ? 21 references, 26 parts.
Does the drawings conform to the final product ? (Make 3 random tubes measurements tol. +/- 1mm)
-
Measure 1
-
Tube n°
-
What's the problem ?
-
Measure 2
-
Tube n°
-
What's the problem ?
-
Measure 3
-
Tube n°
-
What's the problem ?
BF3-01-003 - Removable tube
-
Is this part is present ?
-
Check the alignment between the 4 holes. Is it ok ?
-
Place this part on the frame BF3-01-001, this part can be place and remove easier. Is it correct ?
-
The part placed on the frame, check the alignment with the hole and tapping of tubes n°100 and n°36. Is it correct ?
BF3-01-004 - Disconnector support
-
Is this part is present ?
BF3-01-005 - Protection plate
-
Is this part is present ?
BF3-01-006 - Down square
-
Is this part is present ?
-
Place this part on the frame BF3-01-001, tube n°10. The holes between this part and frame is aligned. Is it correct ?
BF3-01-008 - Frame part removable
-
Is this part is present ?
-
Place this part on the frame BF3-01-001, this part can be place and remove easier. Is it correct ?
-
Place this part on the frame BF3-01-001. The holes between this part and frame is aligned. Is it correct ?
-
The holes of 2 plates n°11 is correctly aligned. Is it correct ?
-
The tube n°9 is perpendicular to the tube n°1. Is it correct ?
Does the drawings conform to the final product ? (Make 3 random holes measurements tol. +/- 1mm)
-
Measure 1
-
Tube or plate n°
-
What's the problem ?
-
Mesure 2
-
Tube or plate n°
-
What's the problem ?
-
Measure 3
-
Tube or plate n°
-
What's the problem ?
BF3-01-009 - High square
-
Is this part is present ?
-
Place this part on the frame BF3-01-001, tube n°83. The holes between this part and frame is aligned. Is it correct ?
Comments
-
Add comment :
Signature
-
Sign off
