Title Page
-
Individual 姓名
-
Test Piece (project, spool, joint) 试件
-
Result 结论
-
Evaluator 考核人
-
Date 日期
-
1 检查工作环境安全和清洁状态 Check work environment for safety and cleanliness
-
3 个人PPE穿戴 Check the PPE
-
3 检查材料、设备、人员资质的有效性Check the effectiveness of testing materials, equipment and personnel qualification
-
4 对零件外表面做目视检查Conduct thorough visual check on external surface of the component
-
5 针对零件几何形状特征选择合适的内窥镜及附属工具Select appropriate bore-scope and accessories in accordance with geometrical characteristics of the component
-
6 对检测零件一完成内窥镜目视检查并记录图像,零件特征:大直径几何特征简单Conduct bore-scope inspection and recording for test object-1: large bore, simple geometrical characteristics
-
7 对检测零件二完成内窥镜目视检查并记录图像,零件特征:小直径几何特征简单Conduct bore-scope inspection and recording for test object-2: small bore, simple geometrical characteristics
-
8 对检测零件三完成内窥镜目视检查并记录图像,零件特征:多处折弯/变径/入口受限Conduct bore-scope inspection and recording for test object-3: complex geometrical characteristics: multiple turns/reduced bore/restricted open ends
-
9 对检测零件四完成内窥镜目视检查并记录图像,零件特征:多处折弯/变径/入口受限Conduct bore-scope inspection and recording for test object-4: complex geometrical characteristics: multiple turns/reduced bore/restricted open ends
-
10 准确记录缺陷并隔离有问题的零件Accurately record observed defect, segregate/hold the component
-
11 确保检验完成的零件开口端重新密封Ensure the open ends are sealed after bore-scope inspection
-
12 再次检查工作环境的安全和清洁状态,确保无任何遗留物品 Recheck work environment for safety and cleanliness, ensure there is no objective left on site