BRUSH- Preventative Maintenance & Inspection - DELTA

Title Page

undefined

IF ITEM IS FAILED, TAKE A PHOTO AND PUT IN NOTES WHAT CAUSE FAILURE. IF FAIR, PUT NOTES
Apparatus Type:
- Pumper
- Tanker
- Service
- Rescue
- Brush
- Support
- Arial
Chassis Mfgr:
Yr. Mfgr:
VIN ID / Serial #
VIN TYPED
Engine Make/Model:
Engine Serial #
Mileage:
Miles Out Photo:
Hour Meter:
Pump Make/Model:
T-Case #
Pump Serial #
APPARATUS IMAGE
Check Engine Oil Level
Check Transmission Oil Level
Check Power Steering Fluid Level
Check Engine Coolant Level
Check Front Hub Oil
Check Rear End Oil Level
Check PTO and Gearbox Oil (Generator/Hydraulic Pump) IF APPLICABLE
Check Steering System (Pump, Hoses, Belts, ETC) IF LEAKING-FAIL
Visually Inspect and Operate Wiper Blades and Washers
Visually Inspect and Operate Windows & Mirrors
Visually Inspect Belts for Cracks & Wear
Visually Inspect Coolant Hoses & Lines for Cracks & Wears
Check for Leaks (Any Fluids)
Check Tires for Excessive Wear / Side Wall Damage / Cracks / Cuts
Check All Tire Tread Depth (6/32 Inches Recommend Replace)
Check Rim and Lug Nuts (All Lugs Must Be Torqued to 450-500 FT-LBS)
Check Park Brakes (If Vehicle Moves It Fails)(Must Have 120 PSI)
Check Brake Pads For Thickness (14/32 Recommend Replace)
Check Air Brake Parts (Drums, Slack Adjusters, Chambers, S-Cams)
Check Drive Line (Shafts, Hanger Bearing, U-Joints, and Straps)
Inspect Chassis Undercarriage Bolts (Loose, Missing, Broken)
Inspect Body Undercarriage for Broken Supports
Inspect Body Sub-Frame & Fasteners

Check Pump Packing; Adjust if Required
Check Darley Weep Hole for Obstruction
Inspect "ALL" Pressure Gauges
Check Aux. Cooler & Pump Cooler Plumbing
Check Pump Tachometer Drive Port & Panel Tach Gauge
Check Water Tank Level Gauge (ADD IMAGE)
Check Foam Tank Level Gauge (ADD IMAGE)
Inspect Hose Reel Drive & Grease Swivel
Operate Reel Rewind
Inspect Booster Tank Fill Tower & Underbody
Check Pump & Transfer Case for Excessive Corrosion & Rotten Bolts, Nuts, Etc
Check Auto Lube (If Applicable)
RECOMMENDATIONS (ADD IN NOTES) *ANYTHING THAT NEEDS ATTENTION BUT NOT CALLED OUT ABOVE*

Inspect & Lube Door Latches (IMAGE OF FAILED ITEMS)
Inspect & Lube Door Hinges or Tracks
Inspect Door Rubber Gaskets
Inspect Door Shocks (Measure Length for Replacement) (ADD IMAGE)
Check Cab Lift Cylinders (IF APPLICABLE)
Inspect Steps and Handrails
RECOMMENDATIONS (ADD IN NOTES) *ANYTHING THAT NEEDS ATTENTION BUT NOT CALLED OUT ABOVE*

Check Master Battery Switch
Check Alternator Output (Add Photo)
Check Ignition Switch
Check Emergency Lights & Flashers
Check Gauges on Instrument Cluster (Speedometer, Tach, Fuel, Alt Output, etc)
Check Kussmaul (Charger, Auto Eject, Auto Pump) "IF AUTO EJECT FLAP IS BROKEN, MARK POOR AND TAKE PHOTO"
Check Headlights
Check Turn Signals
Check Brake Lights
Check Clearance Lights
Check Ground & Side Marker Lights
Check Step Lights
Check License Plate Light
Check Reverse Back Up Lights
Check Reverse Camera IF APPLICABLE
Check Pump Panel Lights
Check Pump Compartment Lights
Check Compartment Lights
Operate & Check Scene Lights/Spot Lights
Operate Generator (PTO, Portable, Hydraulic)
Operate & Check Light Tower
Clean Battery Terminals & Connections
Load Test Batteries
Batteries Pass or Fail
List CCA and CA

Engine Oil Full
Transmission Fluid Full
Power Steering Fluid Full
Coolant Full
Fuel Level Good
Windshield Washer Fluid Full
Head Lights, Tail Lights, Clearance Lights and Signal Lights Working Properly
Brakes are operable
Tires are operable
Pump is operable
Transfer Case Full and Operable
Apparatus Starts
Apparatus Power Off and Plugged In
All used and unused supplies picked up and cleaned.
Notify Department Person In Charge and Delta Service Manager of any out of service issues and/or questionable items *BEFORE LEAVING TRUCK*