Title Page
-
Site conducted
Can Number
-
Date
-
Operative
Hydraulic Power Pack Check Sheet
-
Bodywork. (No damage, loose nuts, bolts, fluid leaks)
-
Controls & gauges. (No damage, fully operational)
-
Hoses / airlines. (All in good condition, no signs of wear / tear, leakage, whip checks in place where required)
-
Fluids. (Oil, coolant, water, fuel – Check levels and top up where necessary)
-
Lubrication points free of damage . (Grease if necessary)
-
Decals / signage. (ID, warning, and information decals legible)
-
Location. (Plant is securely positioned on a flat surface)
-
Miscellaneous. (Drip tray, spill kit and fire extinguisher in place)
-
Inline fuel filter. (No dirt or contaminants. Clean / replace as required)
-
Emergency stop. To perform the check without harming the machine turn the isolator on (red key) then press the blue button ( ignition). Then press one of the E-Stops this should then display on the control screen and state that an E-Stop is engaged
