Title Page
-
Performed by
- Mario Macias
- Juan Macias
- Carlos Montijo
- Marcos Cruz
- Roman Gomez
- Juan Carlos Ramirez
- Juan Vega
- Mario Moran
- Alex Rodriguez
- Eliseo Bombela
- Flor Valenzuela
- Cortez Johnson
-
Date/Time performed:
Hegla 1 & 2 Cutter PM- ONCE PER SHIFT
-
Change cutter wheel and axle.
-
Cutting Oil Level : Minimum 1/2 Full
-
Verify that cutting oil is minimum 1/2 full.
-
Verify all Safety Features (e.g. barriers, warning signals, etc.) are functioning
-
Verify that all safety features are functioning.
-
Blow off cutting table/breakout table felts thoroughly prior to shift start
-
Blow off cutting table/breakout table felts thoroughly prior to shift start.
-
Clean all sensors with a lint free cloth. (Do not damage or shift sensors.)
-
Clean all sensors with a lint free cloth.
-
Clean guide rail for cutter clear at all times so it can move freely when cutter and cutter trolley are in operation.
-
Clean magnets using no more than glass cleaner as cleaning agent.
-
Clean guide rail on the opposite side of cutting table to ensure it is free of any debris or glass.
-
Clean guide rail and check for ear and debris.
-
Check filter cartridge at the grinding head. Inform maintenance personnel if it needs changed.
-
Check filter cartridge at the grinding head. Inform maintenance personnel if it needs changed.
-
Check that all oil pressures are good before starting. If pressures are wrong contact maintenance to get it to proper oil pressures.
-
Check Auto Oiler Levels. Notify Mainteance if collar is at our near minimum level.
-
Clean the transport belts with a damp cloth.
-
Clean the transport belts with a damp cloth.
-
Inspect the stops on cutting table for wear and damage.
-
Inspect the stops on cutting table for wear and damage.
