Inspection Details

  • Customer

  • Tenant

  • Conducted on

  • Prepared by

  • Location
  • Door Number

Door / Operator Information

  • Door Brand

  • Door Age (Approx)

  • Door Size

  • Spring Size

  • Door Thickness

  • Track

  • Track Type

  • GDO Brand

  • GDO Age

Garage Door Inspection

  • Spring(s) - Lubricated, inspected for rust, sagging, obvious wear and tear or defects.

  • Drums - Check for excessive wear, damage, cracks, cable grooves.

  • Cables - Check for rust, fray, kinks.

  • Rollers - Rotate freely, quiet, no excessive play/ noise or damage. - Lubricated

  • Hinges - Check for cracks, bends, excessive wear (no black dust). Lubricated

  • Bearings - Straight, no bearing dust, quiet.

  • Track - Check alignment, signs of bends, wear, missing/ loose bolts, hangers.

  • Bottom Seal/ Retainer - Not cracked/ ripped/ split.

  • Bottom Bracket - Secure, not rusted, damaged or compromised.

  • Torsion Bar - Straight, not damaged, pitted, dented, worn.

  • Section alignment - Properly seals perimeter.

  • Perimeter seals - Not warped, damaged, short/ missing.

  • Door Sections - No creases, tears, damaged panels, rust.

  • Other Notes

  • Overall Condition of Door - Rating out of 10

Operator Inspection

  • How is the Door Operated?

  • Motor Head - Operating normally, lights working, remotes/ wall switch work. Correct height.

  • Power Disconnect

  • Chain - Tight, no excessive wear, rust, fray.

  • Inspect/ Test Photo Eyes (Sensors)

  • Inspect/ Test Safety Edge

  • Inspect/ Test Brake

  • Inspect/ Test Clutch

  • Other Notes

Dock Leveler Inspection

  • Does Unit have a Dock Leveler?

  • Check Operation of Leveler

  • Clean and Sweep Pit

  • Inspect Leveler Welds

  • Inspect Leveler Structure/ Subframe

  • Inspect Shims

  • Inspect Rear Hinges

  • Lubricate Hinge Pins

  • Check for Lip Crown

  • Check Oil Level

  • Fluid Topped?

  • Inspect Main Cylinder

  • Check Wire Harness

  • Check Clevis Pins on all Cylinders + Lubricate

  • Check Lip Cylinder & Mount

  • Check Torque on. HD 30/31 Module Bolts - 30M-50M = 150-200 ft lbs. ...... 60M = 500-750 ft. lbs.

  • Lubricate Lip Hinge

  • Inspect Limit Switch Harness

  • Inspect Limit Switch (Adjust If Necessary)

  • Inspect Toe Guards

  • Inspect Weather Seal

  • Inspect Bumpers

  • Inspect Seals/ Shelter

  • Additional Notes:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.