Commissioning report - JSG - V1

• Site conducted

  Select

• Conducted on

  Date

• Prepared by

• Location
  Address

• Equipment checked

Sungiga

• SunGiga Number

• Serial Number Cabinet

  Media

• Serial Number Battery packs

  Media

• Serial Number PCS

  Media

• Serial Number Chiller

  Media

• Serial Number Junction box

  Media

• Choose an answer

  Master

  Slave

• Is the enclosure in good condition?

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Are the connections made by the client in good condition?

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Are the clearances for the Sungiga acceptable?<br>Rear >0.8m<br>Side >0.1m<br>Front at least 1.5m, needed 2.5m for service.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check all the connectors are in good condition. Pull cables and make sure all the connectors are inserted properly.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check the cooling system pipes, there is not any leakage.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Torque values for reference

  

• Check the torque for the bolted connections on the PCS and busbars. Prove dead before checking the client connections and PCS connections.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check fuses on the front and status of SPD (Surge Protector Device).

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check and tight the screw connections in all the components.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Open the rear and check that the thermostat is set to 20°C. Check that the fans spin freely and in the right position (air outlet)

  Pass

  Fail

  N/A

• Check grounding, check continuity between internal earth and between internal and external.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Take the MSD (Maintenance Switch Disconnector) and connect it to the bottom battery pack.

  Pass

  Fail

  N/A

• Is everything fine for the system to be energised?

  Yes

  No

  N/A

• Please do not energise this Sungiga and check for corrective actions to allow energisation.

  Safe

  At Risk

  N/A

Hot Commissioning Sungiga

Energisation and devices configuration

• Make sure that the client circuit breaker is closed and the 230V are arriving to the Sungiga.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Close MCCB, DC switch and MCBs on the HVBox (in this order). Is the Screen switching ON?

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Please connect the internal network on ETH0 (LAN1 on SCU) and the client cable on ETH1 (LAN2 on SCU)

• Set the IP for the SCU (inner and client networks) as required

  Media

• Set the IP for the PCS and BMU, If there are slave units, please confirm the IPs for slave equipment is right from the SCU screen.

  Media

• Connect to the PCS and change the parameters as required. If there are slave units this will have to be done for all the PCS.

  Media

• Upgrade the software to all the equipment as required. Take a picture of the last software installed

  Media

• Check that the chiller settings are correct

  Media

Protections checks

• Check smoke and heat sensors (one by one), make sure the alarm is visible on the screen.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures

  Media

Testing with SCU

• Apply setpoints for charge and discharge using the screen. Make sure that the system responds to the orders.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• While the system is operating, press the emergency button, the system should stop

  Pass

  Fail

  N/A

• Please provide pictures and/or add comments

  Media

• Please specify

• Please provide pictures

  Media

• Is the EMS under scope

  Yes

  No

  N/A

• Confirm that the EMS can see all parameters of the batteries

  Pass

  Fail

  N/A

• Confirm that EMS can charge/discharge battery and provide services as per client's request

  Pass

  Fail

  N/A

• Please proceed to next page

• Is the enclosure in good condition?

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Are the connections made by the client in good condition?

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Are the clearances for the Sungiga acceptable?<br>Rear >0.8m<br>Side >0.1m<br>Front at least 1.5m, needed 2.5m for service.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check all the connectors are in good condition. Pull cables and make sure all the connectors are inserted properly.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check the cooling system pipes, there is not any leakage.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Torque values for reference

  

• Check the torque for the bolted connections on the PCS and busbars. Prove dead before checking the client connections and PCS connections.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check fuses on the front and status of SPD.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Check and tight the screw connections in all the components.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Open the rear and check that the thermostat is set to 20°C. Check that the fans spin freely and in the right position (air outlet)

  Pass

  Fail

  N/A

• Check grounding, check continuity between internal earth and between internal and external.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Take the MSD and connect it to the bottom battery pack.

  Pass

  Fail

  N/A

• Is everything fine for the system to be energised?

  Yes

  No

  N/A

• Please do not energise this Sungiga and check for corrective actions to allow energisation.

  Safe

  At Risk

  N/A

Hot Commissioning Sungiga

Energisation and devices configuration

• Make sure that the client circuit breaker is closed and the 230V are arriving to the Sungiga.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Close MCCB, DC switch and MCBs on the Junction box (in this order)

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• Set the IP for the PCS and BMU as required as per slave number

  Media

• Connect to the PCS and change the parameters as required.

  Media

• Software upgrade on BCU can be done from SCU unit

• Upgrade the Software of the BCU

  Media

Protections checks

• Check smoke and heat sensors (one by one), make sure the alarm is visible on the screen.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures

  Media

• Are you energising a slave on an existing master unit commissioned previously?

  Yes

  No

  N/A

• No further actions

Testing slave

• Apply setpoints for charge and discharge using the screen of the master. Make sure that the system responds to the orders.

  Pass

  Fail

  N/A

• Please provide pictures

  Media

• Please specify

• Please provide pictures and/or add comments

  Media

• While the system is operating, press the emergency button, the system should stop

  Pass

  Fail

  N/A

• Please provide pictures and/or add comments

  Media

• Please specify

• Please provide pictures

  Media

• Is the EMS under scope

  Yes

  No

  N/A

• Confirm that the EMS can see all parameters of the batteries

  Pass

  Fail

  N/A

• Confirm that EMS can charge/discharge battery and provide services as per client's request

  Pass

  Fail

  N/A

• Please proceed to next page

• Before confirming the commissioning please make sure that the EMS (if supplied) communicates with the system and is able to send commands to the batteries.

• Confirm that the commissioning has been carried out

  Confirm

• Signature of person carrying out the commissioning

  Sign

• Signature of client representative confirming that the commissioning on the equipment has been carried out. If not client representative please write N/P

  Sign