COMMS HARNESS TRAVELER

• Document No.

• Prepared by

• Conducted on

  Date

• Enter Date and Time Assembly Started

  Date

BMS Communications Sub-Harness

• Remove all set pins except 1, 2, 3, 13, 25, and 26

• Use a ____ in length of purple 18 AWG wire and solder-splice to a 3.5 in pigtail from the Orion connector of BOTH Red (Pin 3) AND Blue (Pin 2) wires

• Use a 14 inch length of black 18 AWG and solder-splice the White (Pin 12) ground wire, then crimp a ring terminal to the opposite end

Quality Assurance Check

• Quality check Sub-Harness by another person

• Add signature

  Sign

• Enter Date and Time Assembly Completed

  Date