Title Page
-
Conducted on:
-
Conducted By:
Conveyor Belt
-
Inspect condition of the splice. Check the skives / saddles, cracking of the steps, splice lifting or signs of delamination. (Splice in good condition).
Drive Pulley
-
Inspect condition of the lagging. (If worn to wear indicator there is 10 - 15% life remaining).
Snubber Pulley
-
Inspect condition of the pulley lagging. (If worn to wear indicator there is 10 - 15% life remaining).
Head Pulley
-
Inspect condition of the pulley lagging. (If worn to wear indicator there is 10 - 15% life remaining).
Tail Pulley
-
Inspect condition of the pulley lagging. (If worn to wear indicator there is 10 - 15% life remaining).
Bend Pulley
-
Inspect condition of the pulley lagging. (If worn to wear indicator there is 10 - 15% life remaining).
Tripper Pulleys(If Applicable)
-
Inspect condition of the pulley lagging. (If worn to wear indicator there is 10 - 15% life remaining).
V Plough
-
Inspect ploughs for loose or worn components and security of mounts and bolts. Ensure safety chain in-tact and secure and turnbuckles for damage. (Ploughs in good order and secure).
Return Roller
-
Realign any roller tagged for potential misalignment. (All rollers aligned and functioning correctly).
Return Tracking Frames
-
Check condition of Return tracking frame servo rollers adjusting bolts and free up/lubricate as required (Tracker working as designed).
-
Check the Return tracking frames rotation mechanism to confirm function. (Frame rotating freely).
-
Inspect function of Return Tracking frame centre bearings, ensure all bolts are secure and that servo rollers are functional. (Tracker working as designed).
Trough Roller Frames
-
Check security of mounts, brackets and frames. (All secure).
Trough Tracking Roller Frames
-
Check condition of trough tracking frame servo rollers adjusting bolts and free up/lubricate as required (Tracker working as designed).
-
Check the trough tracking frames rotation mechanism to confirm function. (Frame rotating freely).
-
Inspect function of Trough Tracking frame centre bearings, ensure all bolts are secure and that servo rollers are functional. (Tracker working as designed).
Stacker Tripper
-
Carry out visual inspection of rubber hold down wheel and note excessive wear that may cause damage to belt. Ensure wheels are in correct position. (Wheels in good condition).
