Daily Machine checklist

• Conducted on

  Date

• Prepared by

Bandsaw

• Is machine clean and free of dust missed by extraction?

  Yes

  No

  N/A

• Is the condition of the blade safe to use Check condition of blade

  Yes

  No

  N/A

• Check blade guard is correctly set?

  Yes

  No

  N/A

• Does the Emergency stop button function correctly?

  Yes

  No

  N/A

Strip Heater

• Have all the electrical switches, conduits and cables been checked for wear or damage?

  Yes

  No

  N/A

• Are all work supports fitted correctly?

  Yes

  No

  N/A

Pillar Drill

• Is the chuck guard clean and undamaged?, and does it function correctly?

  Yes

  No

  N/A

• Have all drill bits been removed and put away correctly?

  Yes

  No

  N/A

• Is the drive belt cover fitted correctly and secured correctly?

  Yes

  No

  N/A

Fretsaw

• Is machine clean and free of dust missed by extraction?

  Yes

  No

  N/A

• Is the condition of the blade safe to use? visually Check condition of blade

  Yes

  No

  N/A

• Is the blade guard fitted and undamaged?

  Yes

  No

  N/A

• Check the machine foot functions correctly?

  Yes

  No

  N/A

Belt Sander

• Check fit of sanding table to belt. “It should be as close as possible, normally no greater than 2mm”
  

• Is machine clean and free of dust missed by extraction?

  Yes

  No

  N/A

• Does the sanding belt show any signs of wear or tears, if “yes” replace before use.

  Yes

  No

  N/A

• Check that the belt guard is fitted and secured correctly

  Yes

  No

  N/A

• Does the emergency stop button function. correctly?

  Yes

  No

  N/A

Hand Tools

• Have all hand tools been stored in correct location

  Yes

  No

  N/A

• Are the saw blades intact “Replace saw blades if worn or damaged”

  Yes

  No

  N/A

• Are any hand tools Damaged? “Remove and report damage to supervisor”

  Yes

  No

  N/A

Pedestal Grinder

• Check position of tool rest and adjust if required. It should be as close as possible to the grinding wheel, normally no greater than 3mm.

• Are protective eye screens clean and in correct position?

  Yes

  No

  N/A

• Does grinding wheel show signs of damage?

  Yes

  No

  N/A

• Have all the electrical switches, conduits and cables been checked for wear or damage?

  Yes

  No

  N/A

Buffing Machine

• Are all spindle guards fitted correctly? “Adjust if neeed”

  Yes

  No

  N/A

• Are all polishing mob in working order

  Yes

  No

  N/A

• Have all the electrical switches, conduits and cables been checked for wear or damage?

  Yes

  No

  N/A

Circular Saw

• Is machine clean and free of dust missed by extraction?

  Yes

  No

  N/A

• Does the blade show signs of wear? “Replace or report”

  Yes

  No

  N/A

• check guard and extraction attachment is fitted correctly

  Yes

  No

  N/A

• Does the emergency stop button work correctly?

  Yes

  No

  N/A

Planer/Thicknesser

• Is machine clean and free of dust or shavings missed by extraction?

  Yes

  No

  N/A

• Are all Guards fitted correctly and undamaged?

  Yes

  No

  N/A

• Does the machines emergency stop button function correctly?

  Yes

  No

  N/A

Power Hacksaw

• Does the saws blade show signs wear or damage? “Replace or report”

  Yes

  No

  N/A

• Is cutting area free of debris?

  Yes

  No

  N/A

• Does the machines emergency stop button function correctly?

  Yes

  No

  N/A

Inspection completion

• Any problems or additional notes

• Sign here when inspection is completed

  Sign