Defect Inspection Building - FIRST RUN

This inspection report is not exhaustive; it focuses on identifying obvious or significant defects visible at the time of inspection. This report is not a Certificate of Compliance. It is not a structural report.
It does not cover every aspect of the building.
This report is not a structural report or assessment. This report is not a Certificate of Compliance with the requirements of any Act, Regulation, Ordinance or By-law with legal requirements.
The inspection is visual and limited to accessible and visible areas. The inspector cannot dismantle or move objects (e.g., furniture, appliances) or perform invasive procedures.
Concealed defects are not guaranteed to be identified. The Report does not and cannot make comment upon: the assessment or detection of defects (including rising damp and leaks) which may be subject to the prevailing weather conditions; whether or not services have been used for some time prior to the inspection and whether this will affect the detection of leaks or other defects (eg. In the case of shower enclosures the absence of any dampness at the time of the inspection does not necessarily mean that the enclosure will not leak); the presence or absence of timber pests; gas-fittings; common property areas; environmental concerns; the proximity of the property to flight paths, railways, or busy traffic; noise levels; health and safety issues; heritage concerns; security concerns; fire protection; site drainage (apart from surface water drainage); swimming pools and spas (non-structural); detection and identification of illegal building work; detection and identification of illegal plumbing work; durability of exposed finishes; neighbourhood problems; document analysis; electrical installation; any matters that are solely regulated by statute; any area(s) or item(s) that could not be inspected by the consultant.
Copyright of this report remains with Bosun Engineering Consultants Pty Ltd, all rights reserved. Bosun Engineering Consultants Pty Ltd has granted the Client, named on the report, full utilisation of this report for the purposes of their business needs. No part of the report may be reproduced in any manner or passed on to any third party without the express written consent of Bosun Engineering Consultants Pty Ltd.
DISCLAIMER OF LIABILITY: No Liability shall be accepted on an account of failure of the Report to notify any defects in the area(s) or section(s) of the subject property physically inspected.
DISCLAIMER OF LIABILITY TO THE THIRD PARTIES: This Report is made solely for the use and benefit of the Client named on the front of this report. No liability or responsibility whatsoever, in contract or tort, is accepted to any third party who may rely on the report wholly or in part. Any third party acting or relying on this report, in whole or in part does so at his or her own risk.
This report has been prepared by Bosun Engineering Consultants Pty Ltd for the client named on the report, having taken all due care in its preparation. However, Bosun Engineering Consultants Pty Ltd and its associated consultants are not liable to any person or entity for any damage or loss that has occurred, or may occur, in relation to that person or entity taking or not taking action in respect of any representation, statement opinion or advice referred to herein.