Information
-
Conducted on
-
Prepared by
-
Model Barcode
Function - General
-
DFG1: No drawer to case interference<br><br>
-
DFG2: No drawer to drawer interference.<br>
-
DFG3: No sharp edges<br>
-
DFG4: Correct overhang on all return skirts.<br><br>
-
DFG5: Drawers are not too tight, have good opening action<br><br>
Function - Case Assembly
-
DFC1: Unit is square, not racked<br><br>
-
DFC2: Lock assembly turns easily and operates correctly<br><br>
-
DFC3: Lock bar engages/disengages all drawers<br><br>
Function - Drawer Assembly
-
DFD1: Outstops engage and stop drawer at proper position<br><br>
-
DFD2: Tabs On drawer sides are fully engaged<br><br>
-
DFD3: Drawer pulls are fee of nonconformities <br><br><br>
-
DFD4: Slides extend and retract completely and smoothly<br><br>
-
DFD5: Toggles on the drawers have correct amount, located properly, and do no break under pressure<br><br>
Function - Other
-
DFO1: Hardware is present and correct<br><br>
-
DFO2: Installation instruction are present and correct<br><br>
Appearance - Tops
-
DAT1: No high or low edge strips<br><br>
-
DAT2: NO chips, scratches, dens, excessive glue, etc.<br><br>
Appearance - Case Assembly
-
DAC1: There is no light or heavy paint<br><br><br>
-
DAC2: There are no paint runs<br><br>
-
DAC3: No dents or creases are visible<br><br>
-
DAC4: No grind marks, sanding marks, or scratches are visible<br><br>
Appearance - Drawer Assembly
-
DAD1: There is no light or heavy paint<br><br>
-
DAD2: There are no paint runs<br><br>
-
DAD3: No dents or creases are visible<br><br>
-
DAD4: No grind marks, sanding marks, or scratches are visible<br><br>
Appearance - Packaging
-
DAP1: Labels correct and located properly<br><br>
-
DAP2: No holes, tears, or marks in packaging<br><br>
-
DAP3: Plastic wrap covering desk<br><br>
-
DAP4: Adequate resisto coating where required<br><br><br><br>
Sign Off
-
Signature
