Digital PMC Work Sheet

• Conducted on

  Date

• Prepared by

• GPS Location
  Address

• Panel/Face Number

• Structure Type

  Monopole

  I-Beam

  Wood Pole

  A-Frame

  Wall Mount

• Face Size

  Select 14x48 Poster 12x24 10'6"x36' 10x30 12x48 Other

  • 14x48
  • Poster
  • 12x24
  • 10'6"x36'
  • 10x30
  • 12x48
  • Other

• Take Picture Of Structure

  Media

• Inspect the base ground for damage or corrosion. Repair or clean the ground attachments as needed.

• Inspect access ladders, catwalks and safety line for any visible damage.

• Inspect trim system for any damage.

• Is the Adams logo fastened correctly (centered on skirt)

  Yes

  No

  N/A

• How is overall condition of Skirt/apron?

  Good

  Fair

  Poor

  N/A

• Manufacturer

  Formetco

  Daktronics

  Watchfire

  MRI

  Other

• Enter digital face manufacturer name

• Contact manufacturer service center to inform you are onsite

• Photograph The Display for attachment to the ticket ID

  Media

• Look at the display face for any visual issues. (repair/replace as needed when on structure)

• Verify white balance visually. Report any variances to the NOC for remote adjustments.

• Calibrate any single modules as needed after making any adjustments to the entire face color balance.

• Inspect the componenets of the control system for any visible corrosion. Apply electrical grease as needed to all ethernet points.

• Clean and inspect control box filters.

• Test the control fan system by turning down the temp selector on the control unit.

  Pass

  Fail

  N/A

• Inspect wireless antenna mounts and connectors for damage or corrosion. Clean as needed with electrical grease.

• Inspect photocell for damage and operation. Cover the unit and verify dimming of the display.

  Pass

  Fail

• Test redundant PC operation by disconnecting both ethernet cables to the primary PC. Verify control transfer to redundant PC.

  Pass

  Fail

  N/A

• If accessible, clean the camera housing lens and verify any adjustments that may be needed.

• Check for any unsecured control lines external to the sign.

• Replace or clean Filter material in all cabinets

  Pass

  Fail

  N/A

• Explain issue or upload photo

• Inspect all cabinets for signs of corrosion or water.

  Pass

  Fail

• Explain issue or upload photo

• Inspect operation of all power supply fans while in cabinet, Replace power supplies with failed fans.

  Pass

  Fail

  N/A

• Explain issue or upload photo

• Visually inspect AC connections on power supplies for secure fit.

• Verify closure of all door latches upon completion of each cabinet. Re-verify all doors are closed prior to exiting the structure.

• Inspect control cards, (Formetco) MLC (Daktronics) eFlares (watchfire) for signs of corrosion. Apply dielectric grease as needed.

• Inspect spare parts enclosure for any signs of water intrusion.

  Pass

  Fail

  N/A

• Explain issue or upload photo

Parts count

• How many mods?

• How many power supplies?

• How many ribbon cables?

• How many control cards/MLCs/Eflares?

• List any other parts on hand.

• Note any areas of importance or concern

• Additional Photos

  Media

• Signature of Inspector

  Sign