Title Page

  • WO#

  • Customer Name

  • Conducted on

  • Prepared by

  • Location

LOS

  • What kind LNBF is used for the installation.

  • Is there 5 Degrees Clearance for each orbital

  • Photo of LOS (Taken from arm of dish)

Secure Mount

  • Following the mounting hierarchy, what mount is being used?

  • How many lags must be used for this mount?

  • Is mount installed per DNS and DRS standard? (On stud/ truss, approved lags, bishop tape, sturdy, ect.)

  • Photo of completed mount

Outside Torqued to 30in. lbs

  • VIP/ Wally or Hopper Install

  • Is the installation a DPP/Node or Hybrid?

  • Are all connections at the Dish, Node, and Tap/ Splitters torqued to 30in. lbs?

  • Photo of Node and Components

  • Are all connections at the Dish, Hub, and Tap/ Splitters torqued to 30in. lbs?

  • Photo of Hub and Components

  • Are all connections at the Dish, Ground Block, and Diplexer/ Splitters torqued to 30in. lbs?

  • Photo of Ground Block and Components

  • Is all cable and components approved and in good condition?

  • Is the system Grounded?

  • Picture of Ground Source

  • Why could the system not be grounded?

Signal Outside

  • Is signal passing outside?

  • Photo of outside signal

Inside signal

  • Is signal passing inside

  • Is DBs passing inside? (better than -50)

  • Photo of inside signals

Customer Education

  • Did you cover the basic functions of the guide, remote, and package?

  • If they have DVR, did you cover how to create a timer, stop a recording, navigate the DVR menu, and delete recordings?

  • Did you explain inputs and educate how to recover from off channel/ input?

  • Did you label the remotes for the channel and room they belong in?

  • Was Limited Mode (and Sat Auto-tune for dual tuners) programmed on all remotes?

  • Did you cover CSAT, SHS, and Breakout Literature?

  • Photo of CSAT, SHS, and Breakout Literature with Customer's Name

Affirmation

  • I agree that all the information present is true and performed to the best of my abilities.

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.