Eden Building Foundation / Slab Inspection Ver. 1.0

• BCO No.

• Client / Site

• Conducted on

  Date

• Inspected by

• Location
  Address

• Sub-Contractor Name

• Is Sub-con on site ?

  Yes

  No

  N/A

Foundation Slab

• Is the slab set out correctly as plan ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is DPM been used ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• 2. Ensure formwork height is as per surveyor set out FFL height ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is the form work at same height level?

  Yes

  No

  N/A

• Is the DPM and rebar clean and free from soil and loose polystyrene?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is the rebar grade & type used properly ?

  Select Compliant Non-Compliant N/A

  • Compliant
  • Non-Compliant
  • N/A

• Is the thickening constructed correctly in depth and width? Are enough rebar used?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is the thickening constructed in correct location? Measure out all load bearing walls to confirm.

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is the trimmer bars placed correctly ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• All Ground Beams - are in correct location ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• All Pads - are located under SHS or point load. Ensure pad & SHS concrete footing dimension (ensuring its W x H x L) are marked and dug correctly before concrete ?pour.

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Has the proper mesh been installed ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Have the proper chairs been installed under the mesh? Enough concrete cover ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Are all the Plumbing stub up's installed and properly located?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Drainage pipes - are fully covered by sleeves ranging from gap7 / elbow section to exposing end. Seal openings tightly with waterproofing tapes ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Rebars around pipes are bent correctly. Practice good standard, 2 45’ bends instead of single 90’, Rib edge and edge beam details refer to below. Leave at Least 35mm space between reinforcing bars and pipes ?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is all electrical installed and properly located? Kitchen Island?

  Select Yes No N/A

  • Yes
  • No
  • N/A

• Is Hotedge being installed corrrectly ? If is a HE extra, brick veneer or with base ?

  Select Hotedge Extra Hotedge Brick Veneer Hotedge with base

  • Hotedge Extra
  • Hotedge Brick Veneer
  • Hotedge with base

• Is there a joinery rebate ? Is the rebate allowed at the correct location ? and as per joinery installation guide ?

  Yes

  No

  N/A

• Take picture of any violations.

  Media

Signatures

• Building Inspector's Signature

  Sign

• Sub-contractor Signature

  Sign