Title Page

  • Equipment Number

  • ENGINE HOURS

  • IMPACT HOURS

  • Conducted on

  • Prepared by

  • HOURS UNTIL NEXT SERVICE

  • HOURS UNTIL NEXT HAMMER REBUILD

  • HOURS UNTIL NEXT SUB REBUILD

  • HOURS UNTIL NEXT ROTATION HEAD REBUILD

  • Location

DRILL INSPECTION

Engine

  • Engine oil at required level

  • INSPECT ENGINE OIL FILTER

  • INSPECT FOR OIL LEAKS ON ENGINE

  • INSPECT FUEL FILTERS

  • INSPECT FUEL LINES

  • CLEAN RETURN FUEL SCREEN CATERPILLAR

  • DRAIN WATER FROM PRIMARY FUEL FILTER

  • CHECK COOLANT LEVEL

  • INSPECT UPPER RADIATOR HOSE FOR CRACKS AND ABRASIONS

  • INSPECT LOWER RADIATOR HOSE FOR CRACKS AND ABRASIONS

  • INSPECT ENGINE INNER / OUTER AIR

  • INSPECT / CLEAN OUT ENGINE AIR FILTER PRECLEANER

  • INSPECT ENGINE INTAKE PIPING

  • INSPECT ALTERNATOR MOUNTING AND WIRING

  • INSPECT STARTER MOUNTING AND HARNESS

  • INSPECT BELTS FOR CRACKS AND FRAYS

  • INSPECT EXHAUST PIPING FOR LEAKS

  • INSPECT TURBO

  • INSPECT HOSES INSIDE ENGINE COMPARTMENT FOR WEAR OR BROKEN WEBING

  • INSPECT BATTERY TERMINALS FOR CLEANLENESS / INSPECT FLUID LEVEL

  • CHECK OPERATION OF BLOCK HEATER

  • Drain water from fuel tank

  • INSPECT THE CLENLINESS OF RADIATOR

  • INSPECT RADIATOR

  • INSPECT RADIATOR HOSES

HYDRAULIC SYSTEM

  • INSPECT HYDRAULIC TANK AND SIGHT GLASS

  • Hydraulic oil at required level

  • INSPECT HYDRAULIC OIL FILTER

  • INSPECT HYDRAULIC PUMPS

  • NO LEAKS AT HYDRAULIC PUMPS

  • INSPECT HOSES FEEDING THE HYDRAULIC PUMPS

  • INSPECT HOSE GOING TO HYDRAULIC TANK

  • CHECK OPERATION OF HYDRAULIC FILL SYSTEM

  • INSPECT PUMP COUPLER

  • INSPECT THE CLEANLINESS OF HYDRAULIC OIL COOLER

COMPRESSOR

  • INSPECT RECIEVER TANK

  • RECIVER TANK OIL AT REQUIRED LEVEL

  • DRAIN WATER FROM RECIEVER TANK

  • INSPECT RECEIVER TANK GASKET FOR LEAKS

  • INSPECT SCAVENGER LINES

  • CLEAN SCAVENGER FILTER

  • INSPECT BLOW SWITCHS AND WIRING HARNESS

  • INSPECT COMPRESSOR INNER / OUTER AIR

  • INSPECT / CLEAN OUT COMPRESSOR AIR FILTER PRECLEANER

  • CLEAN OUT VACUATOR VALVES

  • INSPECT COMPRESSOR OIL FILTER

  • INSPECT COMPERSSOR SUB UNIT

  • INSPECT COMPRESSOR INTAKE PIPING

  • INSPECT THE CLEANLINESS OF COMPRESSOR COOLER

  • CHECK COMPRESSOR SUMP MOUNT ORINGS

GEAR BOX

  • INSPECT THE TRANSFER GEAR BOX OIL

  • INSPECT HOSES GOING TO GEAR BOX

  • INSPECT FOR LEAKS

ROCK OIL

  • ROCK OIL TANK FULL

  • DRAIN WATER FROM ROCK OIL TANK

  • RETURN ROCK OIL TANK EMPTY AND HOOKED UP

  • INSPECT ROCK OIL PUMP

  • CLEAN RETURN ROCK OIL SCREEN

  • INSPECT HOSES ASSOCIATED WITH ROCK OIL PUMP

DUST COLLECTOR

  • CONDITION OF SUCTION HEAD

  • INSPECT WEAR PLATES ON SUCTION HEAD

  • INSPECT SUCTION HEAD RUBBERS

  • SUCTION HOSE FROM DUST POT TO PRE CLEANER

  • INSPECT PRE CLEANER

  • DROP OUT HOSE AT PRECLEANER

  • SUCTION HOSE FROM PRECLEANER TO DUST COLLECTOR

  • DROP OUT HOSE AT DUST CABINET

  • DUST COLLECTOR FILTERS

  • DRAIN WATER FROM DUST COLL.

  • EMPTY AND INSPECT AIR DRYERS

CAB

  • CLEANLINESS OF CAB INTERIOR

  • INSPECT FIRE EXTINGUISHER

  • INSPECT CONDITION OF SEAT

  • SEAT BELT / CHECK SAFETY TAG

  • INSPECT FOR CRACKED GLASS

  • INSPECT MIRRORS

  • CHECK OPERATION OF WINDSHIELD WIPERS AND BLADE CONDITION

  • CHECK OPERATION AND FUNCTION OF CONTROL STICKS AND BUTTONS

  • INSPECT A/C COIL CLEANLENESS

  • CHECK OPERATION OF HEATER / A.C.

  • INSPECT CABIN AIR FILTERS

  • CHECK OPERATON OF GAUGES IN CAB

  • INSPECT CONDITION OF LADDER

  • CHECK OPERATION OF ANGLE INDICATOR

  • CHECK OPERATION OF HORN

  • CHECK OPERATION OF LIGHTS

  • CHECK OPERATION BACK UP ALARM

  • CHECK OPERATION RADIO

  • EXTRA HOSES IN CAB

  • CHECK FOR SPARE FUEL FILTERS IN CAB

BODY

  • EXTERIOR CONDITION OF DRILL

  • CHECK THE ALL BODY DOORS

  • INSPECT OPERATION OF DOOR STRUTS AND LOCKS

  • INSPECT HYDRAULIC HOSES INSIDE BODY

  • INSPECT THE BELLY PANS BOLTED ON / BOLTS MISSING

  • CHECK THE MOUNTING OF BACKUP ALARM

UNDERCARRIAGE

  • CHECK FOR PROPER TRACK TENSION / CHECK WITH GUAGE

  • INSPECT TRACKS CHAINS AND TRACK PINS

  • INSPECT TRACK PADS AND PAD BOLTS

  • INSPECT FRONT IDLER

  • INSPECT BOTTOM ROLLERS

  • INSPECT TOP LIMB ROLLER

  • INSPECT PIVIOT BUSHING

  • FINAL DRIVES / SPROCKET

  • CHECK THE OPERATION OSCILLATION CYLINDER

  • OPERATE TRACKS FORWARD, BACKWARDS, LEFT RIGHT

ROD CHANGER

  • INSPECT CONDITION TOP ARM

  • INSPECT ROD CHANGING ROLLERS

  • INSPECT STEEL RACK

  • CONDITION OF DRILL STEEL

  • INSPECT CONDITION BOTTOM ARM

  • PROXIMITY SWITCHES / WIRES

  • INSPECT CENTRALIZER ARMS

  • INSPECT CENTRALIZER BUSHINGS

  • CHECK FOR CRACKS ON STEEL RACK

  • CHECK THE OPERATION OF CYLINDERS

  • CHECK THE ROD CHANGER ALIGNMENT

DRIFTER

  • CHECK TIGHTNESS OF ACCUMULATOR BOLTS

  • CHECK ACCUMULATOR VALVES

  • CHECK TIGHTNESS OF FLUSHING HOUSING BOLTS

  • CHECK TIGHTNESS OF ALL OTHER DRIFTER BOLTS

  • INSPECT THE TIGHTNESS OF ROTATION MOTOR BOLTS

  • INSPECT THE TIGHTNESS OF DRIFTER HOLD DOWN BOLTS

  • OIL LEAKS

  • HYDRAULIC FITTINGS

  • INSPECT HOSES GOING TO DRIFTER FOR WEAR OR BROKEN WEBING

  • INSPECT HYDRAULIC HOSE HOLD DOWN CLAMPS ABOVE DRIFTER

  • INSPECT AND ADJUST WEAR PLATES ON DRIFTER

  • INSPECT THE STRIKING BAR

ROTATION HEAD

  • CONDITION OF ROTATION HEAD

  • LEAKS ON ROTATION HEAD

  • INSPECT HOSES GOING TO ROTATION HEAD FOR WEAR OR BROKEN WEBING

  • MISSING OR LOOSE BOLTS

  • DAMPENING SUB

  • INSPECT SUB ADAPTOR

  • HYDRAULIC FITTINGS

GUIDE SLIDE

  • INSPECT CONDITION OF SLIDE

  • CHECK CONDITION CHAIN

  • INSPECT UPPER / LOWER SPROCKET BEARINGS AND TEETH

  • CHECK OPERATION FEED MOTOR / CYLINDER

  • IS FEED CHAIN ADJUSTED TO PROOPER TENSION

  • INSPECT FOR MISSING / LOOSE BOLTS

  • INSPECT AND ADJUST WEAR PLATES ON GUIDE SLIDE

  • INSPECT HOSES ON SLIDE FOR WEAR OR BROKEN WEBING

  • CHECK GUIDE WITH LEVEL COMPAIR TO ANGLE INDICATOR

  • CHECK OPERATION OPERATION OF CYLINDERS

  • INSPECT ALL MOUNTING BRACKETS FOR HOSES AND HARNESSES

HOSE REEL

  • INSPECT THE CONDITION OF WHEELS

  • INSPECT THE BEARINGS ON SLED

  • CHECK FOR MISSING OR LOOSE BOLTS

  • CHECK FOR CRACKS

  • INSPECT AND ADJUST WEAR PLATES ON HOSE REEL

  • INSPECT THE CHAIN GUIDE AND MOUNTING

BOOM

  • CONDITION OF BOOM

  • INSPECT BOOM WEBING FOR CRACKS

  • CHECK OPERATION OF BOOM CYLINDERS

  • INSPECT FOR MISSING / LOOSE BOLTS

  • INSPECT HOSES ALONG THE BOOM FOR WEAR OR BROKEN WEBING

  • INSPECT PIVOT PINS

  • INSPECT BRACKETS ALONG BOOM FOR HOSES AND WIRING

WINCH

  • OPERATE WINCH

  • INSPECT WINCH CABLE AND HOOK

  • INSPECT WINCH MOUNTING

ADDITIONAL ITEMS

  • GREASE DRILL / FILL AUTO GREASER

  • THREAD GREASE BUCKET FULL

  • EXTRA FUSES IN COMPUTER BOX

  • INSPECT SAFTEY SHUT DOWN DEVICES

  • Does the equipment need power washed

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.