Title Page
-
Location
-
Prepared by
-
Conducted on
-
Client
- GJ Gardner
- Ultraspan
- Multiline
- Cockburn Construction
- Jennian
- Cavalier
- Other
-
Who is the Project Manager?
-
Project managers name?
-
Photos of Scaffold
Scaffolding Inspection Checklist
-
Is the scaffolds highest platform less than 5m?
-
Has WorkSafe been notified?
-
Contact WorkSafe immediately.
-
Does the person conducting the inspection hold a certficate of competency?
-
Stop inspection and get certified scaffolder to undertake inspection. If you see serious issues with the scaffold notify the workers using the scaffold and notify the project manager/site foreman.
-
Is the scaffold's highest component less than 5m high?
-
A Scaffolder hold a Certificate of Competency must perform the inspection.
-
Does the scaffold have a tag system attached at every entry point?
-
Scaffold must be tagged at every entry point, if scaffold is not safe then tag is to be turned around, removed, access to the scaffold disabled and the site project manager/foreman is to be notified.
-
Does the tag show the purpose and duty loading?
-
Complete details before leaving site.
-
Is the scaffold suitable for the purpose for which it is being used? i.e. is it set up for work on the roof or as a working platform only? Remember builders need the same level of protection as roofers for when they are installing purlins/straps etc
-
Notify the project manager/site foreman, if workers are on the roof notify them that the scaffold isn't suitable and that they cannot be doing work up there.
-
Is any work being undertaken on the roof at the time of your inspection?
-
What trade is doing the work?
-
Is the scaffold stable?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service
-
Are workers on site now relying on the scaffold for edge/fall protection or using it as a work platform that is outside its design?
-
Name of person you spoke to and advised the scaffold setup is not suitable for the work they are doing.
-
Notify project manager/site foreman that work is being undertaken that is outside the use of the scaffolds design.
-
Are the internal falls being managed on site?
-
Don't sign the scaffold over as safe until nets or internal rails have been installed. The scaffold has created a fall risk that needs to be managed before the scaffold is safe. Either fix before leaving (internal rails) or remove the scaffold tag and disable access to the scaffold. Project manager/site foreman is to be notified immediately.
-
Does the scaffold have base plates or base jacks centred on the sole boards?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service
-
Are the standards vertical and the ledgers horizontal?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service
-
Are standards and ledgers staggered where possible?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service
-
Is the scaffold less than 300 mm from the work face all around the building?
-
Are internal mid-rails and guardrails installed or is it being managed by another way?
-
Install internal rails or fill in gap with planks. If the platform height does not have internal fall protection - i.e. nets, bags, mesh or protection at 900mm then the scaffold must not be put into service. Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service
-
Does the scaffold have face bracing a max of every 6 bays?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Does the scaffold have transverse bracing a max every 4 bays?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Does the scaffold bracing follow the manufacturer’s specs?
-
Install to manufacturers recommendations and fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are work platforms a min 675 mm wide or follow the manufacturer’s specs?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Is there clear access of 450 mm on each platform?
-
Is it site rubbish restricting access around the scaffold?
-
Ensure appropriate access is created on the scaffold before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Attach photos and contact the project manager/site foreman and advise that the scaffold needs cleaning of debris. If it is creating a danger to users remove the scaffold tag.
-
Are the platforms secured?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Gaps in platform don't exceed 50mm?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are kickboard's installed?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Is there safe access to every platform?
-
Fix before leaving, disable access to those platforms or remove the scaffold tag and disable access the the scaffold. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are ladders secured top and bottom?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are all ladder access openings protected with a selfclosing gate, hatch or tortured path?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Do external ladders extend up to a max of 2 lifts high?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are internal ladders offset a max of every 2 lifts?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are ties a max of 4.8 m in the horizontal and in the vertical?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are rakers connected to the standards or within 300 mm of the standards?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are rakers connected to guardrails, midrails, or ledgers secure or checked?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Do the rakers have a horizontal brace connected back to the scaffold?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Is this scaffold one which does not require screening to protect the public or vehicles?
-
Fix before leaving or remove the scaffold tag and disable access. Project manager/site foreman is to be notified if scaffold is being taken of service.
-
Are the scaffolders trained and wearing safety harnesses?
-
Stop workers and assign them to another task in which they don't need to be wearing a harness, if needed, ensure competent workers are bought in to finish the job.
-
Are the people using the scaffold trained in its use?
-
Has the scaffold remained un-altered, un-adjusted and damaged free since the last inspection?
-
What has happened?
-
Notify Site Foreman
-
You must notify the project manager/site foreman and attach photos of the damage/adjustments.
-
Is the scaffold safe to use and can be put into service?
-
Disable access to all platforms. Contact the project manager/site foreman and notify them that the scaffold is not safe.
-
If the scaffold is compliant as per the Inspection List the scaffold tag should read ‘SAFE’.
-
Comments
-
Name & Signature