Fire Door Inspection

• Job No.

• Premises

• Conducted on

  Date

• Prepared by

• Location
  Address

Door

• Door No.

DOOR LEAF

• Does the door leaf sit against the door stop, flush with the frame and is it free of distortion?

  Yes

  No

• If the door veneered or lipped, is the glue still holding these products firmly in place

  Yes

  No

  N/A

• Is the door free from damage including dents, chips and holes?

  Yes

  No

DOOR FRAME

• Is the door frame firmly attached to the wall

  Yes

  No

• If a planted door stop is present, is it firmly attached

  Yes

  No

  N/A

• Is the frame to door leaf gap consistently 3mm?

  Yes

  No

INTUMESCENT/SMOKE/ACOUSTIC SEALS

• Are intumescent seals in place

  Yes

  No

• Are seals free from paint and varnish?

  Yes

  No

• Are the seals well attached inside the groove in the frame or door leaf?

  Yes

  No

• Are the seals free from damage

  Yes

  No

• If you have a brush or fin type seal, is it free from damage or breakage?

  Yes

  No

  N/A

• If fitted, are the smoke and acoustic seals continuous around the frame or door leaf

  Yes

  No

  N/A

HINGES

• Are all the screws the correct size?

  Yes

  No

• Are the hinges free of metal fragments and oil leakage, which are signs of wear?

  Yes

  No

• Are the hinges free from packing?

  Yes

  No

• Are the hinges marked with CE or BSEN 1935 grade 13?

  Yes

  No

• Is there a minimum of 3 hinges with all screws fitted?

  Yes

  No

DOOR CLOSERS

• Open the door to 5 degrees or 75mm. Does it close and engage with the lock?

  Yes

  No

• Is the closer correctly attached to the door and frame?

  Yes

  No

• Is the closer free from damage and not leaking?

  Yes

  No

• If unlatched, does the closer hold the door in line with the frame and intumescent seal?

  Yes

  No

  N/A

• If hung in pairs, do the close in line if both opened and released together?

  Yes

  No

  N/A

HOLD OPEN DEVICES

• Does the hold open device release the door when required

  Yes

  No

  N/A

GLAZING & GLASS

• Is the intumescent seal continuous and attached to the glass and bead?

  Yes

  No

  N/A

• Are the glazing beads well attached to the frame and free from damage

  Yes

  No

  N/A

• Is the glass free from damage and cracking?

  Yes

  No

  N/A

• If the glass has been replaced, is it fire rated glass?

  Yes

  No

  N/A

• If glazing panels are below 1500mm from the bottom of the door, is the glass safety glass?

  Yes

  No

  N/A

LOCK & LATCH

• Does the latch hold the door firmly in place without rattling?

  Yes

  No

THRESHOLD GAP

• Is there a consistent gap under the door that allows it to swing without touching the floor covering?

  Yes

  No

• Is the door to floor covering gap consistently 10mm or less when the door is closed?

  Yes

  No