Information
-
LOCATION/S:
-
Date:
DOOR WORKS SURVEY
-
LOCATION:
-
Door Requirement
-
DOOR CONFIGERATION
-
USAGE / TRAFFIC
-
1: Certification ID in place (Label or Plug in place)
- YES: FD30
- YES: FD60
- NO CERTIFICATION ID
- NO: CONSIDERED A NOTIONAL FIRE DOOR
- NO: CONSIDERED A NOMINAL FIRE DOOR
- 44/45MM
- 54MM
- NOT A SUITABLE FIRE DOOR
- NO ACCESS
- DOOR HAS NO CERTIFIED ID BUT OTHER DOORS THE SAME WITH IN BUILDING ARE
- OTHER
-
2: DOOR LEAF:
- GOOD CONDITION
- SLIGHT DAMAGED (REPAIRABLE)
- EXTENSIVE DAMAGE (NON REPAIRABLE)
- REPLACEMENT REQUIRED
- OTHER MAINTENANCE
- INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
- DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
- PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
-
MAINTENANCE:
- REPAIR DAMAGE WITH INTUMESCENT WODD FILLER
- RE-LIP THE DOOR EDGES
- DOOR HEAD
- CLOSING SIDE
- HINGE SIDE
- REPLACE DOOR
- REPLACE FRAME/LINING
- OTHER
-
INTUMESCENT WOOD FILLER
-
HARDWOOD LIPPING
-
REPLACEMENT DOOR:
- HOWDENS SPEY 44MM PLYWOOD FLUSH FD30 FIRE DOOR
- HOWDENS THRUXTON WHITE GRAINED 4 PANEL MOULDED FD30 FIRE DOOR
- HOWDENS COLONIAL 44MM WHITE GRAINED 6 PANEL MOULDED FD30 FIRE DOOR
- HOWDENS EXTERNAL : SENTRY BLANK LW EXTERNAL FD30 7'X3' FLUSH
- HOWDENS EXTERNAL: DUNSFOLD PLY 2'6''' FLUSH
- OTHERS
-
HOWDENS SPEY 44MM PLYWOOD FLUSH FD30 FIRE
-
HOWDENS THRUXTON WHITE GRAINED 4 PANEL MOULDED FD30 FIRE DOOR
-
HOWDENS COLONIAL 44MM WHITE GRAINED 6 PANEL MOULDED FD30 FIRE DOOR
-
SENTRY BLANK 3'
-
DUNSFOLD 2'6
-
SIZE:
- H2040XW826mm
- H2040XW726mm
- H2040XW626mm
- H2040XW926mm
- H2040XW526mm
- OTHER
-
REPLACEMENT FRAME/ LINING:
- HOWDENS SOFTWOOD FD30 TRENCHED DOOR LINING
- OTHER
- OTHER
- OTHER
- OTHER
- OTHER
- 108mm FOR 826/926mm FD30 DOOR
- 132mm FOR 826/926mm FD30 FOORS
-
HOWDENS SOFTWOOD FD30 TRENCHED DOOR LINING
-
FINISHED PHOTO REQUIRED:
-
EDGE REPAIR / PROTECTION
-
2.1: DOOR LEAF: Fit to doorstop.
- GOOD CONDITION
- SLIGHT DAMAGED (REPAIRABLE)
- EXTENSIVE DAMAGE (NON REPAIRABLE)
- REPLACEMENT REQUIRED
- OTHER MAINTENANCE
- INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
- DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
- PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
-
MAINTENANCE:
- REMOVE AND RE-FIT DOOR STOPS
- REPLACE DOOR STOP
- HEAD
- CLOSING SIDE
- HINGE SIDE
- 12X25mm
- 12X32mm
- 25X32mm
- 20X45mm
- SOFTWOOD
- HARDWOOD
- REPAIR WITH INTUMESCENT WOOD FILLER
- OTHER MAINTENANCE
-
INTUMECENT WOOD FILLER
-
L SHAPE SMOKE SEAL
-
FINISHED PHOTO REQUIRED:
-
3: FRAME AND DOORSTOPS: Good condition, fixed well
- GOOD CONDITION
- SLIGHT DAMAGED (REPAIRABLE)
- EXTENSIVE DAMAGE (NON REPAIRABLE)
- REPLACEMENT REQUIRED
- OTHER MAINTENANCE
- INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
- DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
- PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
-
MAINTENANCE:
- REPAIR DAMAGED AREA
- EVIROGRAF INTUMESCENT WOOD FILLER
- OTHER
-
ENVIROGRAF INTUMESCENT WOOD FILLER:
-
FINISHED PHOTO REQUIRED:
-
DOORSTOP SIZE: MINIMUM 12 X 25MM
- 12 X 25MM
- 12X 32MM
- 25 X 32MM
- 20X 45MM
- OTHER
- COMPLIANT WITH CERTIFICATION
- UNKOWN IF COMPLIANT WITH CERTIFICATION
- NON COMPLIANT WITH CERTIFICATION
- MAINTENANCE: Remove and replace like for like
- MAINTENANCE: Remove and replace with correct size
- OTHER MAINTENANCE:
-
FRAME /LINING WIDTH: mm
-
DOOR SURROUNDING STRUCTURE:
- BRICK WALL
- WOODEN STRUTCURE
- ASSUMPTION 60 MINS FIRE RATING
- ASSUMPTION 30 MINUTES FIRE RATING
- OLD STRUCTUE (NOTIONAL 30 MINS FIRE RATING)
- UNKOWN
- OTHER
-
4: FIRE STOPPING TO THE LINEAR GAP SEAL (INLINE WITH BS8214:2016) SERVICE CUPBOARDS CHECK THE INNER EDGE
- UNKNOWN (NON DESTRUCTIVE ASSESSMENT)
- ADVISE TEST SAMPLE
- UNPROTECTED GAPS
- GAPS PROTECTED (ASSUMPTION IN LINE WITH GUIDLINES)
- GAPS PROTECTED (NOT IN LINE WITH GUIDELINES)
-
HEAD GAP
- NO ARCHITRAVE UP TO 10mm
- ARCHITRAVE UP TO 20mm
- QUADRANT BEAD UP TO 15MM
- 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
- 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- OTHER
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
- Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)
-
CLOSING EDGE GAP:
- NO ARCHITRAVE UP TO 10mm
- ARCHITRAVE UP TO 20mm
- QUADRANT BEAD UP TO 15MM
- 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
- 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- OTHER
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
- Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)
-
HINGE EDGE GAP:
- NO ARCHITRAVE UP TO 10mm
- ARCHITRAVE UP TO 20mm
- QUADRANT BEAD UP TO 15MM
- 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
- 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- OTHER
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
- Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)
-
BS 8214 9.4 SEALING BETWEEN DOOR ASSEMBLY AND SURROUNDING STRUCTURE (Likely to exhibit significant distortion during fire exposure 60 mins fire resistance (TABLE 5)
- NO ARCHITRAVE UP TO 10mm
- ARCHITRAVE UP TO 20mm
- QUADRANT BEAD UP TO 15MM
- 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
- 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
- OTHER
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
- Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
- Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)
-
NO ARCHITRAVE UP TO 10mm
-
ARCHITRAVE UP TO 20mm
-
QUADRANT BEAD UP TO 15MM
-
SEE NOTES FOR PROTECTION IN LINE WITH BS 8214:2016
-
PRODUCT DETAILS:
- FSD: BLUE 60 FIRE RATED FRAME FOAM 750ML
- SFIX: SOUDAL FIRE RATED EXPANDING FOAM
- OTHER FOAM
- OTHER FOAM
- ROCK WOOD FIREPRO ACCOUSTIC INTUMESCENT SEALANT
- ENVIROGRAF INTUMESCENT ACRYLIC / ACOUSTIC MASTIC
- OTHER SEALANT
- OTHER SEALANT
- ROCK FIBRE: ENVIROGRAF INTUMESCENT COATED SLAB PRODUCT 4
- ROCK FIBRE: FSD ABLATIVE COATED BATT 50mm
- ROCK FIBRE:
- ROCK FIBRE:
- FIREPROOF COATING: ENVROGRAF PRODUCT 86
- OTHER:
-
BLUE 60 FOAM
-
ROCK WOOD MASTIC
-
ENVIROGRAF MASTIC
-
ENVIROGRAF ROCK FIBRE
-
ENVIROGRAF fireproof slab coating
-
FSD ABLATIVE COATED BATT
-
SOUDAL FIRE RATED EX FOAM
-
FINISHED PHOTOS REQUIRED:
-
5: HINGES:
- FIRE RATED GRADE 11 HINGES
- FIRE RATED GRADE 13 HINGES
- ORIGINAL BRASS HINGES (NOTIONAL FIRE RATED)
- ORIGINAL HINGES (NOTIONAL FIRE RATED)
- HINGES NOT FIRE RATED/CORRECT GRADE (Grade 11 minimum)
- HINGES NOT SUITABLE
- GOOD CONDITION
- POOR CONDITION
- NEED CLEANING AND MONITORING
- 3 HINGES IN PLACE
- 2 HINGES IN PLACE
- HINGES FITTED UPSIDE DOWN AND CHANCE OF LEAKING
- PAINTED OVER
- HINGE LOCATION (Action)
- REPLACE HINGES
- ADD ADDITIONAL HINGES
- ADD INTUMESCENT PROTECTION
- OTHER
-
MAINTENANCE:
- INSTALL GRADE 11 FIRE RATED HINGES
- INSTALL GRADE 13 FIRE RATED HINGES
- X3
- X2
- X1
- WITH INTUMESCENT PADS
- GAP ADJUSTMENT REQUIRED
- EXPAND HINGE SIDE GAP
- REDUCE CLOSING SIDE GAP
- REDUCE HEAD GAP
- REDUCE THRESHOLD GAP
- OTHER
-
PRODUCT DETAILS
- SMITH & LOCKE GRADE 13 BALL BEARING HINGES 102X76mm BS EN 1935
- ECLIPSE POLISHED STAINLESS STEEL GRADE 13 FIRE RATED BALL BEARING HINGES 102X76mm BS EN 1935 (HD PRODUCT CODE: HNG0325)
- ZOO GRADE 13 HINGES 102X76mm BS EN 1935
- ECLIPSE CF336 GRADE 13 FIRE DOOR HINGE – SATIN STAINLESS STEEL
- HINGES
- HINGES
- INTUMESCENT PADS (FSD 100X30x1mm)
- INTUMESCENT PADS:ENVIROGRAF INTUMESCENT PAPER: PRODUCT 84
- INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71
- INTUMESCENT PADS
- GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)
-
SMITH & LOCKE
-
ECLIPSE 13
-
ZOO 13
-
FSD 1mm
-
ENVIRO INT PAPER PRODUCT 84
-
ENVIRO INT SHEET PRODUCT 71
-
(FSD Product Code IS200)
-
ECLIPSE CF336 GRADE 13
-
FINISHED PHOTO REQUIRED:
-
ACTION REQUIRED
- RE-SET HINGES IN LINE WITH DOOR CERTIFICATE
- REPAIR DOOR LINING
- REPLACE DOOR FRAME
- HINGES NOT IN LINE WITH CERTIFICATION
- HINGES IN LINE WITH NOTIONAL MEASUREMENTS
- RP LIABILITY AGREED
- Other
-
6: INTUMESCENT STRIPS (HOT SEAL) AND COLD SMOKE SEALS
- INTUMESCENT STRIP ONLY
- INTUMESCENT STRIP AND COLD SMOKE SEAL
- SEPARATE SMOKE SEAL
- 10 mm
- 15 mm
- 20 mm
- X 2
- SUITABLE FOR DOOR
- GOOD CONDITION
- POOR CONDITION
- NOT FULL COVERAGE
- NO MAINTENANCE REQUESTED
- WRONG SIZE
- OTHER
-
MAINTENANCE REQUIRED:
- REPLACE INTUMESCENT STRIPS
- REPLACE INTUMESCENT STRIPS AND COLD SMOKE SEALS
- REPLACE SMOKE SEAL
- 10 mm
- 15 mm
- 20 mm
- X 2
- NON STANDARD SMOKE SEAL REQUIRED TO COVER EXCESSIVE GAP
- OTHER
-
7: GAPS: Between door leaf and frame DOOR HEAD
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
HINGE SIDE GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MID GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
CLOSING SIDE GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MAINTENANCE REQUIRED:
- NO ACTION REQUIRED
- REPLACE EXISTING
- PREPARE DOOR LEAF AND INSTALL
- 10MM width
- 15MM width
- 20MM width
- 2X15MM width
- INTUMESCENT STRIP ONLY
- INTUMESCENT STRIP + SMOKE SEAL
- ENVIROGRAF: SMOKE SEAL 3MM
- ENVIROGRAF: SMOKE SEAL 5MM
- ENVIROGRAF: SMOKE SEAL 8MM
- ENVIROGRAF: SMOKE SEAL 10MM
- ENVIROGRAF: SMOKE SEAL 13MM
- ENVIROGRAF PRODUCT CODE 100
- ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
- RE-LIP EDGE
- ADJUST FROM HINGES
- INSTALL INTUMESCENT PADS
- INCREASE HINGE SIDE GAP
- FRAMEFIT: FRAME SEAL 5MM
- FRAMEFIT: FRAME SEAL 3MM
- FRAMEFIT: FRAME SEAL 1.5MM
- FRAMEFIT: SMOKE SEAL
- FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
- FRAMEFIT: https://youtu.be/tepHiXnNxfk
- FSD BRUSH SEAL 4mm
- FSD FIN SEAL 4mm
- SF BRUSH SEAL 4mm
-
CLOSING SIDE:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
HEAD GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MID GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
FOOT GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MAINTENANCE REQUIRED:
- NO ACTION REQUIRED
- REPLACE EXISTING
- PREPARE DOOR LEAF AND INSTALL
- 10MM width
- 15MM width
- 20MM width
- 2X15MM width
- INTUMESCENT STRIP ONLY
- INTUMESCENT STRIP + SMOKE SEAL
- ENVIROGRAF: SMOKE SEAL 3MM
- ENVIROGRAF: SMOKE SEAL 5MM
- ENVIROGRAF: SMOKE SEAL 8MM
- ENVIROGRAF: SMOKE SEAL 10MM
- ENVIROGRAF: SMOKE SEAL 13MM
- ENVIROGRAF PRODUCT CODE 100
- ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
- RE-LIP EDGE
- ADJUST FROM HINGES
- INSTALL INTUMESCENT PADS
- INCREASE HINGE SIDE GAP
- FRAMEFIT: FRAME SEAL 5MM
- FRAMEFIT: FRAME SEAL 3MM
- FRAMEFIT: FRAME SEAL 1.5MM
- FRAMEFIT: SMOKE SEAL
- FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
- FRAMEFIT: https://youtu.be/tepHiXnNxfk
- FSD BRUSH SEAL 4mm
- FSD FIN SEAL 4mm
- SF BRUSH SEAL 4mm
-
HINGE SIDE
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
HEAD GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MID GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
FOOT GAP:
- GAP 2-4MM
- GAP (NON-COMPLIANT)
- UNEVEN FROM HINGE SIDE TO CLOSING SIDE
- UNEVEN FROM HEAD TO FOOT
- 0MM
- 1MM
- 2MM
- 3MM
- 4MM
- 5MM
- 6MM
- 7MM
- 8MM
- 9MM
- 10MM
- 10+MM
- OTHER
-
MAINTENANCE REQUIRED:
- NO ACTION REQUIRED
- REPLACE EXISTING
- PREPARE DOOR LEAF AND INSTALL
- 10MM width
- 15MM width
- 20MM width
- 2X15MM width
- INTUMESCENT STRIP ONLY
- INTUMESCENT STRIP + SMOKE SEAL
- ENVIROGRAF: SMOKE SEAL 3MM
- ENVIROGRAF: SMOKE SEAL 5MM
- ENVIROGRAF: SMOKE SEAL 8MM
- ENVIROGRAF: SMOKE SEAL 10MM
- ENVIROGRAF: SMOKE SEAL 13MM
- ENVIROGRAF PRODUCT CODE 100
- ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
- RE-LIP EDGE
- ADJUST FROM HINGES
- INSTALL INTUMESCENT PADS
- INCREASE HINGE SIDE GAP
- FRAMEFIT: FRAME SEAL 5MM
- FRAMEFIT: FRAME SEAL 3MM
- FRAMEFIT: FRAME SEAL 1.5MM
- FRAMEFIT: SMOKE SEAL
- FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
- FRAMEFIT: https://youtu.be/tepHiXnNxfk
- FSD BRUSH SEAL 4mm
- FSD FIN SEAL 4mm
- SF BRUSH SEAL 4mm
-
8: THRESHOLD GAP: Fire and smoke door < 3mm Fire door < 8mm. (The gap should be as small as practicable ensuring the door is unlikely to snag on the floor even if the door drops slightly on the hinges)
- FIRE AND SMOKE DOOR <3MM
- FIRE DOOR <8MM
- EXCESSIVE GAP
-
GAP SIZE MM
-
MAINTENANCE REQUIRED:
- REPLACE THRESHOLD / INSTALL THRESHOLD
- ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106
- ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107
- BROWN
- BLACK
- GREY
- SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm
- FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
- FRAMEFIT: SILVER
- FRAMEFIT: WHITE
- Strip: 5mm
- Strip: 3mm
- Strip: 1mm
- FRAMEFIT: https://youtu.be/tepHiXnNxfk
- OTHER
- FSD LORIET METAL THRESHOLD
- HARDWOOD THRESHOLD
- DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si)
- EXTERNAL DROP DOWN THRESHOLD (FSD FS1234)
- WITH INTUMESCENT PROTECTION
-
PRODUCT DETAILS
- REPLACE THRESHOLD / INSTALL THRESHOLD
- ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106
- ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107
- BROWN
- BLACK
- GREY
- SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm
- FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
- FRAMEFIT: SILVER
- FRAMEFIT: WHITE
- Strip: 5mm
- Strip: 3mm
- Strip: 1mm
- FRAMEFIT: https://youtu.be/tepHiXnNxfk
- OTHER
- FSD LORIET METAL THRESHOLD
- HARDWOOD THRESHOLD
- DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si)
- EXTERNAL DROP DOWN THRESHOLD (FSD FS1234)
- WITH INTUMESCENT PROTECTION
-
ENVIRO 106
-
ENVIRO 107
-
ENVIRO 74
-
FRAME FIT cover
-
FSD LORIET THRESHOLD
-
REBATED DROP SEAL
-
FSD EXTERNAL DROP SEAL
-
9: SELF CLOSING DEVICE
- OVERHEAD CONTROLLED CLOSER (FIRE RATED)
- PERKO CONCEALED JAM CLOSER:
- OVERHEAD CLOSER (NOT FIRE RATED)
- SELF-CLOSING HINGES
- NO SELF-CLOSER
- FULLY CLOSING TO DOORSTOPS
- NOT FULLY CLOSING TO DOORSTOPS / LATCH
- ASSUMPTION: DOOR POSSIBLY BOWED
- ASSUMPTION: DOOR FRAME OR STOPS NOT SQUARE
- ISSUE WITH CLOSER
- ADJUST CLOSER
- REPLACE CLOSER WITH OVERHEAD FIRE RATED CLOSER
- ADDITIONAL OVERHEAD CLOSER TO BE INSTALLED
- OTHER
-
MAINTENANCE:
-
PRODUCT DETAILS
- DORMA TS90 OVERHEAD CLOSER
- ECLIPSE 28730 OVERHEAD CLOSER
- RUTLAND TS3204 OVERHEAD CLOSER
- UNION CE24V OVERHEAD CLOSER (BRACKET)
- RUTLAND TS5204 OVERHEAD CLOSER
- BRITON 121CE OVERHEAD CLOSER
- ECLIPSE 73 SERIES OVERHEAD CLOSER
- OVERHEAD CLOSER
- OVERHEAD CLOSER
- INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71
- GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)
-
DORMER TS90
-
ECLIPSE 28730
-
RUTLAND TS3204
-
UNION CE24V
-
RUTLAND TS5204
-
BRITON 121CE
-
ECLIPSE 73 SERIES
-
ENVIROGRAF INTUMESCENT PRODUCT 71
-
Add drawing
-
FINISHED PHOTO REQUIRED:
-
9.1 EQUALITY ACT OPENING FORCES:
-
ADJUST SELF CLOSER TO WITHIN RANGE ENSURING DOOR FULLY CLOSES TO DOOR STOP PAST ANY SMOKE SEALS
-
MAINTENANCE:
-
10: LATCH: LOCKING INTO KEEP, KEYLESS EGRESS
- CYLINDER RIM NIGHTLATCH
- ROLLER BOLT NIGHTLATCH (Allowing keyless re-entry)
- LOCKING INTO KEEP AND HOLDING UNDER PRESSURE
- NOT HOLDING DOOR IN KEEP UNDER PRESSURE
- LATCH/KEEP NOT SUITABLE
- OTHER
- MAINTENACE REQUIRED
- REPLACE LATCH
- ADJUST LATCH
-
PRODUCT DETAILS:
- NIGHT LATCH: ERA DOUBLE LOCKING
- NIGHT LATCH: FRELAN JEDO ROLLER BOLT 60MM
- NIGHT LATCH: SMITH & LOCKE ST-CHR-60 FR 60MM
- NIGHT LATCH: YALE CHROME
- NIGHT LATCH: YALE GUN METAL
- NIGHT LATCH: YALE GUN METAL ROLLER BOLT
- NIGHT LATCH: HWD YALE LAL0505
- NIGHT LATCH: HWD ERA CHRIME HI SEC LAL0511
- NIGHT LATCH: EURO SPEC ROLLER BOLT (TS 79399)
- NIGHT LATCH:
-
ERA Double locking
-
FRELAN JEDO
-
SMITH & LOCKE
-
YALE CHROME
-
YALE GUN METAL
-
YALE GUN ROLLER
-
HWD YALE LAL0505
-
HWD ERA CHROME
-
Tool station chrome roller bolt
-
FINISHED PHOTO REQUIRED:
-
11: MORTICE DEADLOCK: Covered to limit smoke travel, considering keyless egress
- LOCK COVERED
- LOCK OPEN ALLOWING SMOKE TRAVEL
- KEYLESS EGRESS
- NO KEYLESS EGRESS (Consideration for fire safety)
- MAINTENACE REQUIRED
- OTHER
- REMOVE AND REUSE EXISTING LOCK
- INSTALL NEW LOCK
- THUMB TURN FROM INSIDE
- PROTECT WITH INTUMESCENT SLEEVE OTHER
-
PRODUCT DETAILS:
- FSD DEADLOCK KIT 76MM THUMB TURN ESB5030/CT
- FSD THUMB TURN CYLINDER LOCK FDHCYA71370
- FSD INTUMESCENT LOCK KIT FDHCES1271
- HWD ERA FEADLOCK 77mm LAL1395
- HWD THUMB TURN CYLINDER LAL0226
-
FSD LOCK KIT
-
FSD THUMB TURN
-
FSD INT KIT
-
HWD ERA DEADLOCK
-
HWD THUMB TURN CYLINDER
-
FINISHED PHOTO REQUIRED:
-
12: LETTERBOX
- FIRE RATED LETTERBOX
- BRASS OR STEEL LETTERBOX COVERED BOTH SIDES AND STRING LOADED
- LETTERBOX NOT SUITABLE / DAMAGED
- MAINTENANCE REQUIRED
-
MAINTENANCE: Install a fire rated letterbox
-
PRODUCT DETAILS:
- 303mm x 70mm Satin Silver Intumescent FD30 Letter Plate (HD DFUO089)
- 272x70mm firestop Intumescent FD30 Letter Plate (SF 98183)
- 306x70mm firestop Intumescent FD30 Letter Plate (SF 98183)
- 250x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD)
- 250x70mm firestop Intumescent FD30 Letter Plate GOLD (FSD)
- 250x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD)
- 300x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD)
- 300x70mm firestop Intumescent FD30 Letter Plate BRASS(FSD)
- 300x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD)
-
HD SILVER
-
SF silver
-
SF silver 306
-
FSD SAT 250
-
FSD BRASS 250
-
FSD SIL 250
-
FSD SAT 300
-
FSD BRASS 300
-
FSD SIL 300
-
FINSHED PHOTO REQUIRED:
-
13: IRONMONGERY:
-
MAINTENANCE:
-
PRODUCT DETAILS:
-
FINISHED PHOTO REQUIRED:
-
14: HOLD OPEN DEVICES
-
MAINTENANCE REQUIRED:
-
PRODUCT DETAILS
-
FINISHED PHOTO REQUIRED:
-
15: DOOR SIGNAGE
- FIRE DOOR KEEP SHUT
- FIRE DOOR KEEP LOCKED
- ELECTRIC HAZARD
- GAS HAZARD
- OTHER
-
FINSHED PHOTO REQUIRED:
-
KEEP SHUT
-
KERP LOCKED
-
ELECTRIC
-
16: SERVICE CUPBOARDS, PLANT ROOMS & RISERS: Are air transfer grilles
-
MAINTENANCE:
-
PRODUCT DETAILS:
-
FINISHED PHOTO REQUIRED:
-
QUOTE / COSTING
-
Details of the manufacturer
-
An explanation of notional fire doors
According to advice by UK government, a notional fire door is a fire door that satisfied the standards applicable to fire door resistance at the time of construction. These types of doors are therefore not the most up-to-date with the latest codes, regulations and tests, and may not have been fitted with intumescent strips and smoke seals, and may not even be constructed correctly. -
The certificate of approval will detail everything you can and cannot do with the door. There is information denoting the position of hinges, locks, glazing, the types of seals allowed and where they can be installed. THIS INFORMATION CAN NOT BE CONFIRMED AS THERE IS NO CERTIFICATION DETAILS AVAILABLE. GENERAL STANDARDS WILL BE ASSESSED.
-
What are nominal fire doors?
A nominal fire door is a timber-based door providing a fire door resistance performance for a specified period of time. However, they are not the same as certified fire doors which have undergone fire door resistance performance tests to give an indication of fire performance and determine their fire door rating. The performance of the door is simply relied upon by the fire door inspector’s opinion.
INSTALLERS SIGN OFF:
-
DOOR HEAD GAP: mm
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
PRODUCT USED
- FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
- ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
- SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
- FRAME FIT
-
SIZE:
- 15mm strip
- 10 mm strip
- 4 mm SMOKE SEAL
- 5 mm SMOKE SEAL
- 8 mm SMOKE SEAL
- Other
-
100
-
101
-
FSD BRUSH
-
FSD FIN
-
SF BRUSH
-
CLOSING SIDE GAP:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
PRODUCT USED:
- FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
- ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
- SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
- FRAME FIT
-
SIZE:
- 15mm strip
- 10 mm strip
- 4 mm SMOKE SEAL
- 5 mm SMOKE SEAL
- 8 mm SMOKE SEAL
- Other
-
100
-
101
-
FSD BRUSH
-
FSD FIN
-
SF BRUSH
-
HINGE SIDE:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
PRODUCT USED
- FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
- FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
- ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
- ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
- SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
- FRAME FIT
-
SIZE:
- 15mm strip
- 10 mm strip
- 4 mm SMOKE SEAL
- 5 mm SMOKE SEAL
- 8 mm SMOKE SEAL
- Other
-
100
-
101
-
FSD BRUSH
-
FSD FIN
-
SF BRUSH
-
THRESHOLD GAP:
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
PRODUCT USED:
- ENVIROGRAF THRESHOLD 107
- ENVIROGRAF THRESHOLD 107
- ENVIROGRAF EXTERNAL SMOKE BRUSH
- FRAME FIT
- REBATED DROP DOWN SMOKE SEAL (FSD LS8001)
- SURFACE MOUNTED DROP SEAL (FSD FS1233)
-
106
-
107
-
74
-
FRAME FIT
-
DROP SEAL
-
SURFACE MOUNTED DROP SEAL
-
ACTUAL PHOTO:
Signed
-
Completed on behalf of
- CEAS & FIREGUARD / BAUER fire & Security Unit 95 Maple Leaf Business Park, Ramsgate CT12 5GD (01843 295241)
- CANTIUM SAFETY MANAGEMENT LTD, 22 CHURCH STREET BROADSTAIRS CT10 2TT. Tel: 07824 632474
- PASSIVE FIRE SOLUTIONS KENT LTD
-
INSTALLER:
-
Completed by:
- Steven Rigden (TechIOSH, AIFSM, Nebosh FIRE)
- (Certified UK FIRE DOOR TRAINING Fire door inspections)
- (Certified UK FIRE DOOR TRAINING Fire Door Maintenance)
- (FPA UNDERSTANDING FIRE DOORS W17c)
-
Signed:
-
Date:
-
DISCLAIMER
-
Disclaimer: The door set has been made good to the standards detailed above. All tested products have been used and the door set was left in a safe condition. The door set requires checking and maintaining on a regular basis.