FIRE DOOR SET: MAINTENANCE / UPGRADE RECORD (CDM REG38) - NEW

• LOCATION/S:

• Date:

  Date
DOOR WORKS SURVEY

• LOCATION:

• Door Requirement

  FIRE & SMOKE DOOR FD30S

  FIRE DOOR FD30

  FIRE & SMOKE DOOR FD60S

  FIRE DOOR FD60

  OTHER

• DOOR CONFIGERATION

  SINGLE LEAF

  DOUBLE LEAF

  SINGLE ACTING

  DOUBLE ACTING

• USAGE / TRAFFIC

  DWELLING DOOR: MEDIUM

  COMMUNAL DOOR: MEDIUM

  COMMUNAL DOOR: HIGH

  SERVICE ROOM: MEDIUM

  SERVICE ROOM: LOW

• 1: Certification ID in place (Label or Plug in place)

  Select YES: FD30 YES: FD60 NO CERTIFICATION ID NO: CONSIDERED A NOTIONAL FIRE DOOR NO: CONSIDERED A NOMINAL FIRE DOOR 44/45MM 54MM NOT A SUITABLE FIRE DOOR NO ACCESS DOOR HAS NO CERTIFIED ID BUT OTHER DOORS THE SAME WITH IN BUILDING ARE OTHER

  • YES: FD30
  • YES: FD60
  • NO CERTIFICATION ID
  • NO: CONSIDERED A NOTIONAL FIRE DOOR
  • NO: CONSIDERED A NOMINAL FIRE DOOR
  • 44/45MM
  • 54MM
  • NOT A SUITABLE FIRE DOOR
  • NO ACCESS
  • DOOR HAS NO CERTIFIED ID BUT OTHER DOORS THE SAME WITH IN BUILDING ARE
  • OTHER

• 2: DOOR LEAF:

  Select GOOD CONDITION SLIGHT DAMAGED (REPAIRABLE) EXTENSIVE DAMAGE (NON REPAIRABLE) REPLACEMENT REQUIRED OTHER MAINTENANCE INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL) DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108 PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

  • GOOD CONDITION
  • SLIGHT DAMAGED (REPAIRABLE)
  • EXTENSIVE DAMAGE (NON REPAIRABLE)
  • REPLACEMENT REQUIRED
  • OTHER MAINTENANCE
  • INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
  • DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
  • PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

• MAINTENANCE:

  Select REPAIR DAMAGE WITH INTUMESCENT WODD FILLER RE-LIP THE DOOR EDGES DOOR HEAD CLOSING SIDE HINGE SIDE REPLACE DOOR REPLACE FRAME/LINING OTHER

  • REPAIR DAMAGE WITH INTUMESCENT WODD FILLER
  • RE-LIP THE DOOR EDGES
  • DOOR HEAD
  • CLOSING SIDE
  • HINGE SIDE
  • REPLACE DOOR
  • REPLACE FRAME/LINING
  • OTHER

• INTUMESCENT WOOD FILLER

  Drawing

• HARDWOOD LIPPING

  Drawing

• REPLACEMENT DOOR:

  Select HOWDENS SPEY 44MM PLYWOOD FLUSH FD30 FIRE DOOR HOWDENS THRUXTON WHITE GRAINED 4 PANEL MOULDED FD30 FIRE DOOR HOWDENS COLONIAL 44MM WHITE GRAINED 6 PANEL MOULDED FD30 FIRE DOOR HOWDENS EXTERNAL : SENTRY BLANK LW EXTERNAL FD30 7'X3' FLUSH HOWDENS EXTERNAL: DUNSFOLD PLY 2'6''' FLUSH OTHERS

  • HOWDENS SPEY 44MM PLYWOOD FLUSH FD30 FIRE DOOR
  • HOWDENS THRUXTON WHITE GRAINED 4 PANEL MOULDED FD30 FIRE DOOR
  • HOWDENS COLONIAL 44MM WHITE GRAINED 6 PANEL MOULDED FD30 FIRE DOOR
  • HOWDENS EXTERNAL : SENTRY BLANK LW EXTERNAL FD30 7'X3' FLUSH
  • HOWDENS EXTERNAL: DUNSFOLD PLY 2'6''' FLUSH
  • OTHERS

• HOWDENS SPEY 44MM PLYWOOD FLUSH FD30 FIRE

  Drawing

• HOWDENS THRUXTON WHITE GRAINED 4 PANEL MOULDED FD30 FIRE DOOR

  Drawing

• HOWDENS COLONIAL 44MM WHITE GRAINED 6 PANEL MOULDED FD30 FIRE DOOR

  Drawing

• SENTRY BLANK 3'

  Drawing

• DUNSFOLD 2'6

  Drawing

• SIZE:

  Select H2040XW826mm H2040XW726mm H2040XW626mm H2040XW926mm H2040XW526mm OTHER

  • H2040XW826mm
  • H2040XW726mm
  • H2040XW626mm
  • H2040XW926mm
  • H2040XW526mm
  • OTHER

• REPLACEMENT FRAME/ LINING:

  Select HOWDENS SOFTWOOD FD30 TRENCHED DOOR LINING OTHER OTHER OTHER OTHER OTHER 108mm FOR 826/926mm FD30 DOOR 132mm FOR 826/926mm FD30 FOORS

  • HOWDENS SOFTWOOD FD30 TRENCHED DOOR LINING
  • OTHER
  • OTHER
  • OTHER
  • OTHER
  • OTHER
  • 108mm FOR 826/926mm FD30 DOOR
  • 132mm FOR 826/926mm FD30 FOORS

• HOWDENS SOFTWOOD FD30 TRENCHED DOOR LINING

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• EDGE REPAIR / PROTECTION

  Drawing

• 2.1: DOOR LEAF: Fit to doorstop.

  Select GOOD CONDITION SLIGHT DAMAGED (REPAIRABLE) EXTENSIVE DAMAGE (NON REPAIRABLE) REPLACEMENT REQUIRED OTHER MAINTENANCE INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL) DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108 PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

  • GOOD CONDITION
  • SLIGHT DAMAGED (REPAIRABLE)
  • EXTENSIVE DAMAGE (NON REPAIRABLE)
  • REPLACEMENT REQUIRED
  • OTHER MAINTENANCE
  • INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
  • DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
  • PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

• MAINTENANCE:

  Select REMOVE AND RE-FIT DOOR STOPS REPLACE DOOR STOP HEAD CLOSING SIDE HINGE SIDE 12X25mm 12X32mm 25X32mm 20X45mm SOFTWOOD HARDWOOD REPAIR WITH INTUMESCENT WOOD FILLER OTHER MAINTENANCE

  • REMOVE AND RE-FIT DOOR STOPS
  • REPLACE DOOR STOP
  • HEAD
  • CLOSING SIDE
  • HINGE SIDE
  • 12X25mm
  • 12X32mm
  • 25X32mm
  • 20X45mm
  • SOFTWOOD
  • HARDWOOD
  • REPAIR WITH INTUMESCENT WOOD FILLER
  • OTHER MAINTENANCE

• INTUMECENT WOOD FILLER

  Drawing

• L SHAPE SMOKE SEAL

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• 3: FRAME AND DOORSTOPS: Good condition, fixed well

  Select GOOD CONDITION SLIGHT DAMAGED (REPAIRABLE) EXTENSIVE DAMAGE (NON REPAIRABLE) REPLACEMENT REQUIRED OTHER MAINTENANCE INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL) DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108 PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

  • GOOD CONDITION
  • SLIGHT DAMAGED (REPAIRABLE)
  • EXTENSIVE DAMAGE (NON REPAIRABLE)
  • REPLACEMENT REQUIRED
  • OTHER MAINTENANCE
  • INSTALL CORNER SMOKE SEAL (ENVIROGRAF L SHAPE RUBBER SEAL)
  • DAMAGED CLOSING EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108
  • PROTECT DOOR EDGE (INSTALL EDGE PROTECTION) ENVIROGRAF 108

• MAINTENANCE:

  Select REPAIR DAMAGED AREA EVIROGRAF INTUMESCENT WOOD FILLER OTHER

  • REPAIR DAMAGED AREA
  • EVIROGRAF INTUMESCENT WOOD FILLER
  • OTHER

• ENVIROGRAF INTUMESCENT WOOD FILLER:

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• DOORSTOP SIZE: MINIMUM 12 X 25MM

  Select 12 X 25MM 12X 32MM 25 X 32MM 20X 45MM OTHER COMPLIANT WITH CERTIFICATION UNKOWN IF COMPLIANT WITH CERTIFICATION NON COMPLIANT WITH CERTIFICATION MAINTENANCE: Remove and replace like for like MAINTENANCE: Remove and replace with correct size OTHER MAINTENANCE:

  • 12 X 25MM
  • 12X 32MM
  • 25 X 32MM
  • 20X 45MM
  • OTHER
  • COMPLIANT WITH CERTIFICATION
  • UNKOWN IF COMPLIANT WITH CERTIFICATION
  • NON COMPLIANT WITH CERTIFICATION
  • MAINTENANCE: Remove and replace like for like
  • MAINTENANCE: Remove and replace with correct size
  • OTHER MAINTENANCE:

• FRAME /LINING WIDTH: mm

• DOOR SURROUNDING STRUCTURE:

  Select BRICK WALL WOODEN STRUTCURE ASSUMPTION 60 MINS FIRE RATING ASSUMPTION 30 MINUTES FIRE RATING OLD STRUCTUE (NOTIONAL 30 MINS FIRE RATING) UNKOWN OTHER

  • BRICK WALL
  • WOODEN STRUTCURE
  • ASSUMPTION 60 MINS FIRE RATING
  • ASSUMPTION 30 MINUTES FIRE RATING
  • OLD STRUCTUE (NOTIONAL 30 MINS FIRE RATING)
  • UNKOWN
  • OTHER

• 4: FIRE STOPPING TO THE LINEAR GAP SEAL (INLINE WITH BS8214:2016) SERVICE CUPBOARDS CHECK THE INNER EDGE

  Select UNKNOWN (NON DESTRUCTIVE ASSESSMENT) ADVISE TEST SAMPLE UNPROTECTED GAPS GAPS PROTECTED (ASSUMPTION IN LINE WITH GUIDLINES) GAPS PROTECTED (NOT IN LINE WITH GUIDELINES)

  • UNKNOWN (NON DESTRUCTIVE ASSESSMENT)
  • ADVISE TEST SAMPLE
  • UNPROTECTED GAPS
  • GAPS PROTECTED (ASSUMPTION IN LINE WITH GUIDLINES)
  • GAPS PROTECTED (NOT IN LINE WITH GUIDELINES)

• HEAD GAP

  Select NO ARCHITRAVE UP TO 10mm ARCHITRAVE UP TO 20mm QUADRANT BEAD UP TO 15MM 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic. 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. OTHER Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2 Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3) Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

  • NO ARCHITRAVE UP TO 10mm
  • ARCHITRAVE UP TO 20mm
  • QUADRANT BEAD UP TO 15MM
  • 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
  • 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • OTHER
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
  • Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

• CLOSING EDGE GAP:

  Select NO ARCHITRAVE UP TO 10mm ARCHITRAVE UP TO 20mm QUADRANT BEAD UP TO 15MM 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic. 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. OTHER Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2 Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3) Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

  • NO ARCHITRAVE UP TO 10mm
  • ARCHITRAVE UP TO 20mm
  • QUADRANT BEAD UP TO 15MM
  • 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
  • 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • OTHER
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
  • Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

• HINGE EDGE GAP:

  Select NO ARCHITRAVE UP TO 10mm ARCHITRAVE UP TO 20mm QUADRANT BEAD UP TO 15MM 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic. 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. OTHER Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2 Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3) Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

  • NO ARCHITRAVE UP TO 10mm
  • ARCHITRAVE UP TO 20mm
  • QUADRANT BEAD UP TO 15MM
  • 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
  • 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • OTHER
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
  • Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

• BS 8214 9.4 SEALING BETWEEN DOOR ASSEMBLY AND SURROUNDING STRUCTURE (Likely to exhibit significant distortion during fire exposure 60 mins fire resistance (TABLE 5)

  Select NO ARCHITRAVE UP TO 10mm ARCHITRAVE UP TO 20mm QUADRANT BEAD UP TO 15MM 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic. 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic. OTHER Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2 Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3) Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

  • NO ARCHITRAVE UP TO 10mm
  • ARCHITRAVE UP TO 20mm
  • QUADRANT BEAD UP TO 15MM
  • 1: NO ARCHITRAVE: 60 MINS BS 8214: 2016: Gap up to 10mm: Mineral rock fibre tightly packed to a depth of the frame making allowance for a 10 mm capping, to both faces, of mastic.
  • 2: ARCHITRAVE to be minimum 15 mm thick constructed from softwood, hardwood or MDF with 15 mm overlap on frame and wall: Gap up to 20mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • 3: Minimum 10 mm hardwood quadrant beads tightly fitted between wall and frame: Gap up to 15mm: Mineral rock fibre tightly packed for the full depth of the frame capped with mastic.
  • OTHER
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 30 min fire resistance TABLE 2
  • Supporting construction likely to exhibit significant distortion during fire exposure, with 30 min fire resistance (TABLE 3)
  • Supporting construction unlikely to exhibit significant distortion during fire exposure, with 60 min fire resistance (TABLE 4)

• NO ARCHITRAVE UP TO 10mm

  Drawing

• ARCHITRAVE UP TO 20mm

  Drawing

• QUADRANT BEAD UP TO 15MM

  Drawing

• SEE NOTES FOR PROTECTION IN LINE WITH BS 8214:2016

• PRODUCT DETAILS:

  Select FSD: BLUE 60 FIRE RATED FRAME FOAM 750ML SFIX: SOUDAL FIRE RATED EXPANDING FOAM OTHER FOAM OTHER FOAM ROCK WOOD FIREPRO ACCOUSTIC INTUMESCENT SEALANT ENVIROGRAF INTUMESCENT ACRYLIC / ACOUSTIC MASTIC OTHER SEALANT OTHER SEALANT ROCK FIBRE: ENVIROGRAF INTUMESCENT COATED SLAB PRODUCT 4 ROCK FIBRE: FSD ABLATIVE COATED BATT 50mm ROCK FIBRE: ROCK FIBRE: FIREPROOF COATING: ENVROGRAF PRODUCT 86 OTHER:

  • FSD: BLUE 60 FIRE RATED FRAME FOAM 750ML
  • SFIX: SOUDAL FIRE RATED EXPANDING FOAM
  • OTHER FOAM
  • OTHER FOAM
  • ROCK WOOD FIREPRO ACCOUSTIC INTUMESCENT SEALANT
  • ENVIROGRAF INTUMESCENT ACRYLIC / ACOUSTIC MASTIC
  • OTHER SEALANT
  • OTHER SEALANT
  • ROCK FIBRE: ENVIROGRAF INTUMESCENT COATED SLAB PRODUCT 4
  • ROCK FIBRE: FSD ABLATIVE COATED BATT 50mm
  • ROCK FIBRE:
  • ROCK FIBRE:
  • FIREPROOF COATING: ENVROGRAF PRODUCT 86
  • OTHER:

• BLUE 60 FOAM

  Drawing

• ROCK WOOD MASTIC

  Drawing

• ENVIROGRAF MASTIC

  Drawing

• ENVIROGRAF ROCK FIBRE

  Drawing

• ENVIROGRAF fireproof slab coating

  Drawing

• FSD ABLATIVE COATED BATT

  Drawing

• SOUDAL FIRE RATED EX FOAM

  Drawing

• FINISHED PHOTOS REQUIRED:

  Media

• 5: HINGES:

  Select FIRE RATED GRADE 11 HINGES FIRE RATED GRADE 13 HINGES ORIGINAL BRASS HINGES (NOTIONAL FIRE RATED) ORIGINAL HINGES (NOTIONAL FIRE RATED) HINGES NOT FIRE RATED/CORRECT GRADE (Grade 11 minimum) HINGES NOT SUITABLE GOOD CONDITION POOR CONDITION NEED CLEANING AND MONITORING 3 HINGES IN PLACE 2 HINGES IN PLACE HINGES FITTED UPSIDE DOWN AND CHANCE OF LEAKING PAINTED OVER HINGE LOCATION (Action) REPLACE HINGES ADD ADDITIONAL HINGES ADD INTUMESCENT PROTECTION OTHER

  • FIRE RATED GRADE 11 HINGES
  • FIRE RATED GRADE 13 HINGES
  • ORIGINAL BRASS HINGES (NOTIONAL FIRE RATED)
  • ORIGINAL HINGES (NOTIONAL FIRE RATED)
  • HINGES NOT FIRE RATED/CORRECT GRADE (Grade 11 minimum)
  • HINGES NOT SUITABLE
  • GOOD CONDITION
  • POOR CONDITION
  • NEED CLEANING AND MONITORING
  • 3 HINGES IN PLACE
  • 2 HINGES IN PLACE
  • HINGES FITTED UPSIDE DOWN AND CHANCE OF LEAKING
  • PAINTED OVER
  • HINGE LOCATION (Action)
  • REPLACE HINGES
  • ADD ADDITIONAL HINGES
  • ADD INTUMESCENT PROTECTION
  • OTHER

• MAINTENANCE:

  Select INSTALL GRADE 11 FIRE RATED HINGES INSTALL GRADE 13 FIRE RATED HINGES X3 X2 X1 WITH INTUMESCENT PADS GAP ADJUSTMENT REQUIRED EXPAND HINGE SIDE GAP REDUCE CLOSING SIDE GAP REDUCE HEAD GAP REDUCE THRESHOLD GAP OTHER

  • INSTALL GRADE 11 FIRE RATED HINGES
  • INSTALL GRADE 13 FIRE RATED HINGES
  • X3
  • X2
  • X1
  • WITH INTUMESCENT PADS
  • GAP ADJUSTMENT REQUIRED
  • EXPAND HINGE SIDE GAP
  • REDUCE CLOSING SIDE GAP
  • REDUCE HEAD GAP
  • REDUCE THRESHOLD GAP
  • OTHER

• PRODUCT DETAILS

  Select SMITH & LOCKE GRADE 13 BALL BEARING HINGES 102X76mm BS EN 1935 ECLIPSE POLISHED STAINLESS STEEL GRADE 13 FIRE RATED BALL BEARING HINGES 102X76mm BS EN 1935 (HD PRODUCT CODE: HNG0325) ZOO GRADE 13 HINGES 102X76mm BS EN 1935 ECLIPSE CF336 GRADE 13 FIRE DOOR HINGE – SATIN STAINLESS STEEL HINGES HINGES INTUMESCENT PADS (FSD 100X30x1mm) INTUMESCENT PADS:ENVIROGRAF INTUMESCENT PAPER: PRODUCT 84 INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71 INTUMESCENT PADS GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)

  • SMITH & LOCKE GRADE 13 BALL BEARING HINGES 102X76mm BS EN 1935
  • ECLIPSE POLISHED STAINLESS STEEL GRADE 13 FIRE RATED BALL BEARING HINGES 102X76mm BS EN 1935 (HD PRODUCT CODE: HNG0325)
  • ZOO GRADE 13 HINGES 102X76mm BS EN 1935
  • ECLIPSE CF336 GRADE 13 FIRE DOOR HINGE – SATIN STAINLESS STEEL
  • HINGES
  • HINGES
  • INTUMESCENT PADS (FSD 100X30x1mm)
  • INTUMESCENT PADS:ENVIROGRAF INTUMESCENT PAPER: PRODUCT 84
  • INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71
  • INTUMESCENT PADS
  • GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)

• SMITH & LOCKE

  Drawing

• ECLIPSE 13

  Drawing

• ZOO 13

  Drawing

• FSD 1mm

  Drawing

• ENVIRO INT PAPER PRODUCT 84

  Drawing

• ENVIRO INT SHEET PRODUCT 71

  Drawing

• (FSD Product Code IS200)

  Drawing

• ECLIPSE CF336 GRADE 13

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• ACTION REQUIRED

  Select RE-SET HINGES IN LINE WITH DOOR CERTIFICATE REPAIR DOOR LINING REPLACE DOOR FRAME HINGES NOT IN LINE WITH CERTIFICATION HINGES IN LINE WITH NOTIONAL MEASUREMENTS RP LIABILITY AGREED Other

  • RE-SET HINGES IN LINE WITH DOOR CERTIFICATE
  • REPAIR DOOR LINING
  • REPLACE DOOR FRAME
  • HINGES NOT IN LINE WITH CERTIFICATION
  • HINGES IN LINE WITH NOTIONAL MEASUREMENTS
  • RP LIABILITY AGREED
  • Other

• 6: INTUMESCENT STRIPS (HOT SEAL) AND COLD SMOKE SEALS

  Select INTUMESCENT STRIP ONLY INTUMESCENT STRIP AND COLD SMOKE SEAL SEPARATE SMOKE SEAL 10 mm 15 mm 20 mm X 2 SUITABLE FOR DOOR GOOD CONDITION POOR CONDITION NOT FULL COVERAGE NO MAINTENANCE REQUESTED WRONG SIZE OTHER

  • INTUMESCENT STRIP ONLY
  • INTUMESCENT STRIP AND COLD SMOKE SEAL
  • SEPARATE SMOKE SEAL
  • 10 mm
  • 15 mm
  • 20 mm
  • X 2
  • SUITABLE FOR DOOR
  • GOOD CONDITION
  • POOR CONDITION
  • NOT FULL COVERAGE
  • NO MAINTENANCE REQUESTED
  • WRONG SIZE
  • OTHER

• MAINTENANCE REQUIRED:

  Select REPLACE INTUMESCENT STRIPS REPLACE INTUMESCENT STRIPS AND COLD SMOKE SEALS REPLACE SMOKE SEAL 10 mm 15 mm 20 mm X 2 NON STANDARD SMOKE SEAL REQUIRED TO COVER EXCESSIVE GAP OTHER

  • REPLACE INTUMESCENT STRIPS
  • REPLACE INTUMESCENT STRIPS AND COLD SMOKE SEALS
  • REPLACE SMOKE SEAL
  • 10 mm
  • 15 mm
  • 20 mm
  • X 2
  • NON STANDARD SMOKE SEAL REQUIRED TO COVER EXCESSIVE GAP
  • OTHER

• 7: GAPS: Between door leaf and frame DOOR HEAD

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• HINGE SIDE GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MID GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• CLOSING SIDE GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MAINTENANCE REQUIRED:

  Select NO ACTION REQUIRED REPLACE EXISTING PREPARE DOOR LEAF AND INSTALL 10MM width 15MM width 20MM width 2X15MM width INTUMESCENT STRIP ONLY INTUMESCENT STRIP + SMOKE SEAL ENVIROGRAF: SMOKE SEAL 3MM ENVIROGRAF: SMOKE SEAL 5MM ENVIROGRAF: SMOKE SEAL 8MM ENVIROGRAF: SMOKE SEAL 10MM ENVIROGRAF: SMOKE SEAL 13MM ENVIROGRAF PRODUCT CODE 100 ENVIROGRAF PRODUCT (PUSH FIT) CODE 101 RE-LIP EDGE ADJUST FROM HINGES INSTALL INTUMESCENT PADS INCREASE HINGE SIDE GAP FRAMEFIT: FRAME SEAL 5MM FRAMEFIT: FRAME SEAL 3MM FRAMEFIT: FRAME SEAL 1.5MM FRAMEFIT: SMOKE SEAL FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1 FRAMEFIT: https://youtu.be/tepHiXnNxfk FSD BRUSH SEAL 4mm FSD FIN SEAL 4mm SF BRUSH SEAL 4mm

  • NO ACTION REQUIRED
  • REPLACE EXISTING
  • PREPARE DOOR LEAF AND INSTALL
  • 10MM width
  • 15MM width
  • 20MM width
  • 2X15MM width
  • INTUMESCENT STRIP ONLY
  • INTUMESCENT STRIP + SMOKE SEAL
  • ENVIROGRAF: SMOKE SEAL 3MM
  • ENVIROGRAF: SMOKE SEAL 5MM
  • ENVIROGRAF: SMOKE SEAL 8MM
  • ENVIROGRAF: SMOKE SEAL 10MM
  • ENVIROGRAF: SMOKE SEAL 13MM
  • ENVIROGRAF PRODUCT CODE 100
  • ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
  • RE-LIP EDGE
  • ADJUST FROM HINGES
  • INSTALL INTUMESCENT PADS
  • INCREASE HINGE SIDE GAP
  • FRAMEFIT: FRAME SEAL 5MM
  • FRAMEFIT: FRAME SEAL 3MM
  • FRAMEFIT: FRAME SEAL 1.5MM
  • FRAMEFIT: SMOKE SEAL
  • FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
  • FRAMEFIT: https://youtu.be/tepHiXnNxfk
  • FSD BRUSH SEAL 4mm
  • FSD FIN SEAL 4mm
  • SF BRUSH SEAL 4mm

• CLOSING SIDE:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• HEAD GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MID GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• FOOT GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MAINTENANCE REQUIRED:

  Select NO ACTION REQUIRED REPLACE EXISTING PREPARE DOOR LEAF AND INSTALL 10MM width 15MM width 20MM width 2X15MM width INTUMESCENT STRIP ONLY INTUMESCENT STRIP + SMOKE SEAL ENVIROGRAF: SMOKE SEAL 3MM ENVIROGRAF: SMOKE SEAL 5MM ENVIROGRAF: SMOKE SEAL 8MM ENVIROGRAF: SMOKE SEAL 10MM ENVIROGRAF: SMOKE SEAL 13MM ENVIROGRAF PRODUCT CODE 100 ENVIROGRAF PRODUCT (PUSH FIT) CODE 101 RE-LIP EDGE ADJUST FROM HINGES INSTALL INTUMESCENT PADS INCREASE HINGE SIDE GAP FRAMEFIT: FRAME SEAL 5MM FRAMEFIT: FRAME SEAL 3MM FRAMEFIT: FRAME SEAL 1.5MM FRAMEFIT: SMOKE SEAL FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1 FRAMEFIT: https://youtu.be/tepHiXnNxfk FSD BRUSH SEAL 4mm FSD FIN SEAL 4mm SF BRUSH SEAL 4mm

  • NO ACTION REQUIRED
  • REPLACE EXISTING
  • PREPARE DOOR LEAF AND INSTALL
  • 10MM width
  • 15MM width
  • 20MM width
  • 2X15MM width
  • INTUMESCENT STRIP ONLY
  • INTUMESCENT STRIP + SMOKE SEAL
  • ENVIROGRAF: SMOKE SEAL 3MM
  • ENVIROGRAF: SMOKE SEAL 5MM
  • ENVIROGRAF: SMOKE SEAL 8MM
  • ENVIROGRAF: SMOKE SEAL 10MM
  • ENVIROGRAF: SMOKE SEAL 13MM
  • ENVIROGRAF PRODUCT CODE 100
  • ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
  • RE-LIP EDGE
  • ADJUST FROM HINGES
  • INSTALL INTUMESCENT PADS
  • INCREASE HINGE SIDE GAP
  • FRAMEFIT: FRAME SEAL 5MM
  • FRAMEFIT: FRAME SEAL 3MM
  • FRAMEFIT: FRAME SEAL 1.5MM
  • FRAMEFIT: SMOKE SEAL
  • FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
  • FRAMEFIT: https://youtu.be/tepHiXnNxfk
  • FSD BRUSH SEAL 4mm
  • FSD FIN SEAL 4mm
  • SF BRUSH SEAL 4mm

• HINGE SIDE

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• HEAD GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MID GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• FOOT GAP:

  Select GAP 2-4MM GAP (NON-COMPLIANT) UNEVEN FROM HINGE SIDE TO CLOSING SIDE UNEVEN FROM HEAD TO FOOT 0MM 1MM 2MM 3MM 4MM 5MM 6MM 7MM 8MM 9MM 10MM 10+MM OTHER

  • GAP 2-4MM
  • GAP (NON-COMPLIANT)
  • UNEVEN FROM HINGE SIDE TO CLOSING SIDE
  • UNEVEN FROM HEAD TO FOOT
  • 0MM
  • 1MM
  • 2MM
  • 3MM
  • 4MM
  • 5MM
  • 6MM
  • 7MM
  • 8MM
  • 9MM
  • 10MM
  • 10+MM
  • OTHER

• MAINTENANCE REQUIRED:

  Select NO ACTION REQUIRED REPLACE EXISTING PREPARE DOOR LEAF AND INSTALL 10MM width 15MM width 20MM width 2X15MM width INTUMESCENT STRIP ONLY INTUMESCENT STRIP + SMOKE SEAL ENVIROGRAF: SMOKE SEAL 3MM ENVIROGRAF: SMOKE SEAL 5MM ENVIROGRAF: SMOKE SEAL 8MM ENVIROGRAF: SMOKE SEAL 10MM ENVIROGRAF: SMOKE SEAL 13MM ENVIROGRAF PRODUCT CODE 100 ENVIROGRAF PRODUCT (PUSH FIT) CODE 101 RE-LIP EDGE ADJUST FROM HINGES INSTALL INTUMESCENT PADS INCREASE HINGE SIDE GAP FRAMEFIT: FRAME SEAL 5MM FRAMEFIT: FRAME SEAL 3MM FRAMEFIT: FRAME SEAL 1.5MM FRAMEFIT: SMOKE SEAL FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1 FRAMEFIT: https://youtu.be/tepHiXnNxfk FSD BRUSH SEAL 4mm FSD FIN SEAL 4mm SF BRUSH SEAL 4mm

  • NO ACTION REQUIRED
  • REPLACE EXISTING
  • PREPARE DOOR LEAF AND INSTALL
  • 10MM width
  • 15MM width
  • 20MM width
  • 2X15MM width
  • INTUMESCENT STRIP ONLY
  • INTUMESCENT STRIP + SMOKE SEAL
  • ENVIROGRAF: SMOKE SEAL 3MM
  • ENVIROGRAF: SMOKE SEAL 5MM
  • ENVIROGRAF: SMOKE SEAL 8MM
  • ENVIROGRAF: SMOKE SEAL 10MM
  • ENVIROGRAF: SMOKE SEAL 13MM
  • ENVIROGRAF PRODUCT CODE 100
  • ENVIROGRAF PRODUCT (PUSH FIT) CODE 101
  • RE-LIP EDGE
  • ADJUST FROM HINGES
  • INSTALL INTUMESCENT PADS
  • INCREASE HINGE SIDE GAP
  • FRAMEFIT: FRAME SEAL 5MM
  • FRAMEFIT: FRAME SEAL 3MM
  • FRAMEFIT: FRAME SEAL 1.5MM
  • FRAMEFIT: SMOKE SEAL
  • FRAMEFIT: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
  • FRAMEFIT: https://youtu.be/tepHiXnNxfk
  • FSD BRUSH SEAL 4mm
  • FSD FIN SEAL 4mm
  • SF BRUSH SEAL 4mm

• 8: THRESHOLD GAP: Fire and smoke door < 3mm Fire door < 8mm. (The gap should be as small as practicable ensuring the door is unlikely to snag on the floor even if the door drops slightly on the hinges)

  Select FIRE AND SMOKE DOOR <3MM FIRE DOOR <8MM EXCESSIVE GAP

  • FIRE AND SMOKE DOOR <3MM
  • FIRE DOOR <8MM
  • EXCESSIVE GAP

• GAP SIZE MM

• MAINTENANCE REQUIRED:

  Select REPLACE THRESHOLD / INSTALL THRESHOLD ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106 ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107 BROWN BLACK GREY SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1 FRAMEFIT: SILVER FRAMEFIT: WHITE Strip: 5mm Strip: 3mm Strip: 1mm FRAMEFIT: https://youtu.be/tepHiXnNxfk OTHER FSD LORIET METAL THRESHOLD HARDWOOD THRESHOLD DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si) EXTERNAL DROP DOWN THRESHOLD (FSD FS1234) WITH INTUMESCENT PROTECTION

  • REPLACE THRESHOLD / INSTALL THRESHOLD
  • ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106
  • ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107
  • BROWN
  • BLACK
  • GREY
  • SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm
  • FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
  • FRAMEFIT: SILVER
  • FRAMEFIT: WHITE
  • Strip: 5mm
  • Strip: 3mm
  • Strip: 1mm
  • FRAMEFIT: https://youtu.be/tepHiXnNxfk
  • OTHER
  • FSD LORIET METAL THRESHOLD
  • HARDWOOD THRESHOLD
  • DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si)
  • EXTERNAL DROP DOWN THRESHOLD (FSD FS1234)
  • WITH INTUMESCENT PROTECTION

• PRODUCT DETAILS

  Select REPLACE THRESHOLD / INSTALL THRESHOLD ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106 ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107 BROWN BLACK GREY SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1 FRAMEFIT: SILVER FRAMEFIT: WHITE Strip: 5mm Strip: 3mm Strip: 1mm FRAMEFIT: https://youtu.be/tepHiXnNxfk OTHER FSD LORIET METAL THRESHOLD HARDWOOD THRESHOLD DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si) EXTERNAL DROP DOWN THRESHOLD (FSD FS1234) WITH INTUMESCENT PROTECTION

  • REPLACE THRESHOLD / INSTALL THRESHOLD
  • ENVIROGRAF: WEATHER THRESHOLD DT & DTE PRODUCT CODE 106
  • ENVIROGRAF: DOMESTIC / INDUSTRIAL THRESHOLD SEAL PRODUCT CODE 107
  • BROWN
  • BLACK
  • GREY
  • SURFACE MOUNTED SMOKE SEAL TO COVER GAP <8 mm
  • FRAMEFIT: BOTTOM DOOR SEAL: Fully tested and compliant to BS 476 Part 22 & BS EN 1634-1
  • FRAMEFIT: SILVER
  • FRAMEFIT: WHITE
  • Strip: 5mm
  • Strip: 3mm
  • Strip: 1mm
  • FRAMEFIT: https://youtu.be/tepHiXnNxfk
  • OTHER
  • FSD LORIET METAL THRESHOLD
  • HARDWOOD THRESHOLD
  • DROP DOWN THRESHOLD REBATED (FSD LORIET LA 800 Si)
  • EXTERNAL DROP DOWN THRESHOLD (FSD FS1234)
  • WITH INTUMESCENT PROTECTION

• ENVIRO 106

  Drawing

• ENVIRO 107

  Drawing

• ENVIRO 74

  Drawing

• FRAME FIT cover

  Drawing

• FSD LORIET THRESHOLD

  Drawing

• REBATED DROP SEAL

  Drawing

• FSD EXTERNAL DROP SEAL

  Drawing

• 9: SELF CLOSING DEVICE

  Select OVERHEAD CONTROLLED CLOSER (FIRE RATED) PERKO CONCEALED JAM CLOSER: OVERHEAD CLOSER (NOT FIRE RATED) SELF-CLOSING HINGES NO SELF-CLOSER FULLY CLOSING TO DOORSTOPS NOT FULLY CLOSING TO DOORSTOPS / LATCH ASSUMPTION: DOOR POSSIBLY BOWED ASSUMPTION: DOOR FRAME OR STOPS NOT SQUARE ISSUE WITH CLOSER ADJUST CLOSER REPLACE CLOSER WITH OVERHEAD FIRE RATED CLOSER ADDITIONAL OVERHEAD CLOSER TO BE INSTALLED OTHER

  • OVERHEAD CONTROLLED CLOSER (FIRE RATED)
  • PERKO CONCEALED JAM CLOSER:
  • OVERHEAD CLOSER (NOT FIRE RATED)
  • SELF-CLOSING HINGES
  • NO SELF-CLOSER
  • FULLY CLOSING TO DOORSTOPS
  • NOT FULLY CLOSING TO DOORSTOPS / LATCH
  • ASSUMPTION: DOOR POSSIBLY BOWED
  • ASSUMPTION: DOOR FRAME OR STOPS NOT SQUARE
  • ISSUE WITH CLOSER
  • ADJUST CLOSER
  • REPLACE CLOSER WITH OVERHEAD FIRE RATED CLOSER
  • ADDITIONAL OVERHEAD CLOSER TO BE INSTALLED
  • OTHER

• MAINTENANCE:

• PRODUCT DETAILS

  Select DORMA TS90 OVERHEAD CLOSER ECLIPSE 28730 OVERHEAD CLOSER RUTLAND TS3204 OVERHEAD CLOSER UNION CE24V OVERHEAD CLOSER (BRACKET) RUTLAND TS5204 OVERHEAD CLOSER BRITON 121CE OVERHEAD CLOSER ECLIPSE 73 SERIES OVERHEAD CLOSER OVERHEAD CLOSER OVERHEAD CLOSER INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71 GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)

  • DORMA TS90 OVERHEAD CLOSER
  • ECLIPSE 28730 OVERHEAD CLOSER
  • RUTLAND TS3204 OVERHEAD CLOSER
  • UNION CE24V OVERHEAD CLOSER (BRACKET)
  • RUTLAND TS5204 OVERHEAD CLOSER
  • BRITON 121CE OVERHEAD CLOSER
  • ECLIPSE 73 SERIES OVERHEAD CLOSER
  • OVERHEAD CLOSER
  • OVERHEAD CLOSER
  • INTUMESCENT PADS: ENVIROGRAF INTUMESCENT PROTECTIVE SHEET 1MM: PRODUCT 71
  • GRAPHITE INTUMESCENT SHEET 0.8MM (FSD Product Code IS200)

• DORMER TS90

  Drawing

• ECLIPSE 28730

  Drawing

• RUTLAND TS3204

  Drawing

• UNION CE24V

  Drawing

• RUTLAND TS5204

  Drawing

• BRITON 121CE

  Drawing

• ECLIPSE 73 SERIES

  Drawing

• ENVIROGRAF INTUMESCENT PRODUCT 71

  Drawing

• Add drawing

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• 9.1 EQUALITY ACT OPENING FORCES:

  WITHIN RANGE

  ADJUSTMENT REQUIRED

  REPLACE CLOSER

  OTHER

• ADJUST SELF CLOSER TO WITHIN RANGE ENSURING DOOR FULLY CLOSES TO DOOR STOP PAST ANY SMOKE SEALS

• MAINTENANCE:

• 10: LATCH: LOCKING INTO KEEP, KEYLESS EGRESS

  Select CYLINDER RIM NIGHTLATCH ROLLER BOLT NIGHTLATCH (Allowing keyless re-entry) LOCKING INTO KEEP AND HOLDING UNDER PRESSURE NOT HOLDING DOOR IN KEEP UNDER PRESSURE LATCH/KEEP NOT SUITABLE OTHER MAINTENACE REQUIRED REPLACE LATCH ADJUST LATCH

  • CYLINDER RIM NIGHTLATCH
  • ROLLER BOLT NIGHTLATCH (Allowing keyless re-entry)
  • LOCKING INTO KEEP AND HOLDING UNDER PRESSURE
  • NOT HOLDING DOOR IN KEEP UNDER PRESSURE
  • LATCH/KEEP NOT SUITABLE
  • OTHER
  • MAINTENACE REQUIRED
  • REPLACE LATCH
  • ADJUST LATCH

• PRODUCT DETAILS:

  Select NIGHT LATCH: ERA DOUBLE LOCKING NIGHT LATCH: FRELAN JEDO ROLLER BOLT 60MM NIGHT LATCH: SMITH & LOCKE ST-CHR-60 FR 60MM NIGHT LATCH: YALE CHROME NIGHT LATCH: YALE GUN METAL NIGHT LATCH: YALE GUN METAL ROLLER BOLT NIGHT LATCH: HWD YALE LAL0505 NIGHT LATCH: HWD ERA CHRIME HI SEC LAL0511 NIGHT LATCH: EURO SPEC ROLLER BOLT (TS 79399) NIGHT LATCH:

  • NIGHT LATCH: ERA DOUBLE LOCKING
  • NIGHT LATCH: FRELAN JEDO ROLLER BOLT 60MM
  • NIGHT LATCH: SMITH & LOCKE ST-CHR-60 FR 60MM
  • NIGHT LATCH: YALE CHROME
  • NIGHT LATCH: YALE GUN METAL
  • NIGHT LATCH: YALE GUN METAL ROLLER BOLT
  • NIGHT LATCH: HWD YALE LAL0505
  • NIGHT LATCH: HWD ERA CHRIME HI SEC LAL0511
  • NIGHT LATCH: EURO SPEC ROLLER BOLT (TS 79399)
  • NIGHT LATCH:

• ERA Double locking

  Drawing

• FRELAN JEDO

  Drawing

• SMITH & LOCKE

  Drawing

• YALE CHROME

  Drawing

• YALE GUN METAL

  Drawing

• YALE GUN ROLLER

  Drawing

• HWD YALE LAL0505

  Drawing

• HWD ERA CHROME

  Drawing

• Tool station chrome roller bolt

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• 11: MORTICE DEADLOCK: Covered to limit smoke travel, considering keyless egress

  Select LOCK COVERED LOCK OPEN ALLOWING SMOKE TRAVEL KEYLESS EGRESS NO KEYLESS EGRESS (Consideration for fire safety) MAINTENACE REQUIRED OTHER REMOVE AND REUSE EXISTING LOCK INSTALL NEW LOCK THUMB TURN FROM INSIDE PROTECT WITH INTUMESCENT SLEEVE OTHER

  • LOCK COVERED
  • LOCK OPEN ALLOWING SMOKE TRAVEL
  • KEYLESS EGRESS
  • NO KEYLESS EGRESS (Consideration for fire safety)
  • MAINTENACE REQUIRED
  • OTHER
  • REMOVE AND REUSE EXISTING LOCK
  • INSTALL NEW LOCK
  • THUMB TURN FROM INSIDE
  • PROTECT WITH INTUMESCENT SLEEVE OTHER

• PRODUCT DETAILS:

  Select FSD DEADLOCK KIT 76MM THUMB TURN ESB5030/CT FSD THUMB TURN CYLINDER LOCK FDHCYA71370 FSD INTUMESCENT LOCK KIT FDHCES1271 HWD ERA FEADLOCK 77mm LAL1395 HWD THUMB TURN CYLINDER LAL0226

  • FSD DEADLOCK KIT 76MM THUMB TURN ESB5030/CT
  • FSD THUMB TURN CYLINDER LOCK FDHCYA71370
  • FSD INTUMESCENT LOCK KIT FDHCES1271
  • HWD ERA FEADLOCK 77mm LAL1395
  • HWD THUMB TURN CYLINDER LAL0226

• FSD LOCK KIT

  Drawing

• FSD THUMB TURN

  Drawing

• FSD INT KIT

  Drawing

• HWD ERA DEADLOCK

  Drawing

• HWD THUMB TURN CYLINDER

  Drawing

• FINISHED PHOTO REQUIRED:

  Media

• 12: LETTERBOX

  Select FIRE RATED LETTERBOX BRASS OR STEEL LETTERBOX COVERED BOTH SIDES AND STRING LOADED LETTERBOX NOT SUITABLE / DAMAGED MAINTENANCE REQUIRED

  • FIRE RATED LETTERBOX
  • BRASS OR STEEL LETTERBOX COVERED BOTH SIDES AND STRING LOADED
  • LETTERBOX NOT SUITABLE / DAMAGED
  • MAINTENANCE REQUIRED

• MAINTENANCE: Install a fire rated letterbox

• PRODUCT DETAILS:

  Select 303mm x 70mm Satin Silver Intumescent FD30 Letter Plate (HD DFUO089) 272x70mm firestop Intumescent FD30 Letter Plate (SF 98183) 306x70mm firestop Intumescent FD30 Letter Plate (SF 98183) 250x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD) 250x70mm firestop Intumescent FD30 Letter Plate GOLD (FSD) 250x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD) 300x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD) 300x70mm firestop Intumescent FD30 Letter Plate BRASS(FSD) 300x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD)

  • 303mm x 70mm Satin Silver Intumescent FD30 Letter Plate (HD DFUO089)
  • 272x70mm firestop Intumescent FD30 Letter Plate (SF 98183)
  • 306x70mm firestop Intumescent FD30 Letter Plate (SF 98183)
  • 250x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD)
  • 250x70mm firestop Intumescent FD30 Letter Plate GOLD (FSD)
  • 250x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD)
  • 300x70mm firestop Intumescent FD30 Letter Plate SILVER (FSD)
  • 300x70mm firestop Intumescent FD30 Letter Plate BRASS(FSD)
  • 300x70mm firestop Intumescent FD30 Letter Plate SILVER SATIN (FSD)

• HD SILVER

  Drawing

• SF silver

  Drawing

• SF silver 306

  Drawing

• FSD SAT 250

  Drawing

• FSD BRASS 250

  Drawing

• FSD SIL 250

  Drawing

• FSD SAT 300

  Drawing

• FSD BRASS 300

  Drawing

• FSD SIL 300

  Drawing

• FINSHED PHOTO REQUIRED:

  Media

• 13: IRONMONGERY:

  NO MAINTENANCE REQUIRED

  MAINTENANCE REQUIRED

• MAINTENANCE:

• PRODUCT DETAILS:

• FINISHED PHOTO REQUIRED:

  Media

• 14: HOLD OPEN DEVICES

  NO MAINTENANCE REQUIRED

  MAINTENANCE REQUIRED

• MAINTENANCE REQUIRED:

• PRODUCT DETAILS

• FINISHED PHOTO REQUIRED:

  Media

• 15: DOOR SIGNAGE

  Select FIRE DOOR KEEP SHUT FIRE DOOR KEEP LOCKED ELECTRIC HAZARD GAS HAZARD OTHER

  • FIRE DOOR KEEP SHUT
  • FIRE DOOR KEEP LOCKED
  • ELECTRIC HAZARD
  • GAS HAZARD
  • OTHER

• FINSHED PHOTO REQUIRED:

  Media

• KEEP SHUT

  Drawing

• KERP LOCKED

  Drawing

• ELECTRIC

  Drawing

• 16: SERVICE CUPBOARDS, PLANT ROOMS & RISERS: Are air transfer grilles

  NO MAINTENANCE REQUIRED

  MAINTENANCE REQUIRED

• MAINTENANCE:

• PRODUCT DETAILS:

• FINISHED PHOTO REQUIRED:

  Media

• QUOTE / COSTING

• Details of the manufacturer

• An explanation of notional fire doors
  According to advice by UK government, a notional fire door is a fire door that satisfied the standards applicable to fire door resistance at the time of construction. These types of doors are therefore not the most up-to-date with the latest codes, regulations and tests, and may not have been fitted with intumescent strips and smoke seals, and may not even be constructed correctly.

• The certificate of approval will detail everything you can and cannot do with the door. There is information denoting the position of hinges, locks, glazing, the types of seals allowed and where they can be installed. THIS INFORMATION CAN NOT BE CONFIRMED AS THERE IS NO CERTIFICATION DETAILS AVAILABLE. GENERAL STANDARDS WILL BE ASSESSED.

• What are nominal fire doors?
  A nominal fire door is a timber-based door providing a fire door resistance performance for a specified period of time. However, they are not the same as certified fire doors which have undergone fire door resistance performance tests to give an indication of fire performance and determine their fire door rating. The performance of the door is simply relied upon by the fire door inspector’s opinion.

INSTALLERS SIGN OFF:

• DOOR HEAD GAP: mm

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• PRODUCT USED

  Select FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100) ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101) SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm FRAME FIT

  • FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
  • ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
  • SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
  • FRAME FIT

• SIZE:

  Select 15mm strip 10 mm strip 4 mm SMOKE SEAL 5 mm SMOKE SEAL 8 mm SMOKE SEAL Other

  • 15mm strip
  • 10 mm strip
  • 4 mm SMOKE SEAL
  • 5 mm SMOKE SEAL
  • 8 mm SMOKE SEAL
  • Other

• 100

  Drawing

• 101

  Drawing

• FSD BRUSH

  Drawing

• FSD FIN

  Drawing

• SF BRUSH

  Drawing

• CLOSING SIDE GAP:

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• PRODUCT USED:

  Select FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100) ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101) SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm FRAME FIT

  • FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
  • ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
  • SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
  • FRAME FIT

• SIZE:

  Select 15mm strip 10 mm strip 4 mm SMOKE SEAL 5 mm SMOKE SEAL 8 mm SMOKE SEAL Other

  • 15mm strip
  • 10 mm strip
  • 4 mm SMOKE SEAL
  • 5 mm SMOKE SEAL
  • 8 mm SMOKE SEAL
  • Other

• 100

  Drawing

• 101

  Drawing

• FSD BRUSH

  Drawing

• FSD FIN

  Drawing

• SF BRUSH

  Drawing

• HINGE SIDE:

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• PRODUCT USED

  Select FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100) ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101) SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm FRAME FIT

  • FSD 10 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 10 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4 mm
  • FSD 15 mm INTUMESCENT STRIP WITH FIN SMOKE SEAL 4 mm
  • ENVIROGRAF INTUMESCENT STRIP AND BRUSH SMOKE SEAL (PRODUCT 100)
  • ENVIROGRAF INTUMESCENT STRIP (PUSH FIT) WITH BRUSH SMOKE SEAL (PRODUCT 101)
  • SFIX INTUMESCENT STRIP WITH BRUSH SMOKE SEAL 4mm
  • FRAME FIT

• SIZE:

  Select 15mm strip 10 mm strip 4 mm SMOKE SEAL 5 mm SMOKE SEAL 8 mm SMOKE SEAL Other

  • 15mm strip
  • 10 mm strip
  • 4 mm SMOKE SEAL
  • 5 mm SMOKE SEAL
  • 8 mm SMOKE SEAL
  • Other

• 100

  Drawing

• 101

  Drawing

• FSD BRUSH

  Drawing

• FSD FIN

  Drawing

• SF BRUSH

  Drawing

• THRESHOLD GAP:

  Select 1 2 3 4 5 6 7 8 9 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

• PRODUCT USED:

  Select ENVIROGRAF THRESHOLD 107 ENVIROGRAF THRESHOLD 107 ENVIROGRAF EXTERNAL SMOKE BRUSH FRAME FIT REBATED DROP DOWN SMOKE SEAL (FSD LS8001) SURFACE MOUNTED DROP SEAL (FSD FS1233)

  • ENVIROGRAF THRESHOLD 107
  • ENVIROGRAF THRESHOLD 107
  • ENVIROGRAF EXTERNAL SMOKE BRUSH
  • FRAME FIT
  • REBATED DROP DOWN SMOKE SEAL (FSD LS8001)
  • SURFACE MOUNTED DROP SEAL (FSD FS1233)

• 106

  Drawing

• 107

  Drawing

• 74

  Drawing

• FRAME FIT

  Drawing

• DROP SEAL

  Drawing

• SURFACE MOUNTED DROP SEAL

  Drawing

• ACTUAL PHOTO:

  Media

Signed

• Completed on behalf of

  Select CEAS & FIREGUARD / BAUER fire & Security Unit 95 Maple Leaf Business Park, Ramsgate CT12 5GD (01843 295241) CANTIUM SAFETY MANAGEMENT LTD, 22 CHURCH STREET BROADSTAIRS CT10 2TT. Tel: 07824 632474 PASSIVE FIRE SOLUTIONS KENT LTD

  • CEAS & FIREGUARD / BAUER fire & Security Unit 95 Maple Leaf Business Park, Ramsgate CT12 5GD (01843 295241)
  • CANTIUM SAFETY MANAGEMENT LTD, 22 CHURCH STREET BROADSTAIRS CT10 2TT. Tel: 07824 632474
  • PASSIVE FIRE SOLUTIONS KENT LTD

• INSTALLER:

  Sign

• Completed by:

  Select Steven Rigden (TechIOSH, AIFSM, Nebosh FIRE) (Certified UK FIRE DOOR TRAINING Fire door inspections) (Certified UK FIRE DOOR TRAINING Fire Door Maintenance) (FPA UNDERSTANDING FIRE DOORS W17c)

  • Steven Rigden (TechIOSH, AIFSM, Nebosh FIRE)
  • (Certified UK FIRE DOOR TRAINING Fire door inspections)
  • (Certified UK FIRE DOOR TRAINING Fire Door Maintenance)
  • (FPA UNDERSTANDING FIRE DOORS W17c)

• Signed:

  Sign

• Date:

  Date

• DISCLAIMER

  Display

• Disclaimer: The door set has been made good to the standards detailed above. All tested products have been used and the door set was left in a safe condition. The door set requires checking and maintaining on a regular basis.