Information
-
Document No.
-
Audit Title
-
Client / Site
-
Conducted on
-
Prepared by
-
Location
-
Personnel
-
RENOVATIO FIRE SAFETY LIMITED, 110 HOLST AVENUE, WITHAM, ESSEX, CM8 1SX
We have today inspected and serviced as necessary to BS5306; parts 3 & 8 2009, THE FOLLOWING EXTINGUISHERS, WHICH WERE LEFT IN GOOD WORKING ORDER, except where indicated below.
PLEASE NOTE COMMENTS BELOW UNDER SPECIAL REMARKS.
SCHEDULE OF EQUIPMENT.
Special Remarks & Parts used
-
Do any Extinguishers require refilling and recharging?
-
Do any Water, Foam, Wet Chemical or Dry Powder Extinguishers require "Extended Maintenance" ?
-
Do any Carbon Dioxide Extinguisher require "Overhaul Maintenance" ?
-
Have the above been passed fit for use?
-
If no, have these been condemned?
-
If no, have these been replaced?
-
Have all Extinguishers been passed fit for use?
-
Are all Extinguishers either wall mounted on Brackets or on Extinguisher Stands/Trolleys?
-
Is there adequate provision of Portable Fire Extinguishers.
-
Are all Extinguisher locations and type clearly marked with Identification Signs.
-
Next Maintenance Inspection Due
- January 2017
- February 2017
- March 2017
- April 2017
- May 2017
- June 2017
- July 2017
- August 2017
- September 2017
- October 2017
- November 2017
- December 2017
-
ROUTINE INSPECTION BY USER:
It is recommended that regular inspection of all extinguishers, spare gas cartridges and replacement charges should be carried out by the user or user's representative, at intervals, to make sure that appliances are in their proper position and have not been discharged, lost pressure (in case of fire extinguishers fitted with a pressure indicator), or suffered obvious damage. The frequency of inspection should not be less than quarterly and preferably at least monthly. The user should replace existing extinguishers not available for use with serviceable extinguishers. -
Maintenance Technician P. R. MCWATERS (BFC Certificate # 2012:2329)
-
Signature of Responsible Person