FORKLIFT INSPECTION

• Forklift Inspection

• Jobsite Location:
  Address

• Job #

  Select

• Model

  Media

• Manufacturer

  Select

• Date of Inspection:

  Date

• Hour Meter

• Weather - Select all that apply

  Select

• Superintendent (s):

  Select

• Operator Name:

• Prepared by

GENERAL

• Has the operator been instructed in the safe operation of this type of lift?

  Yes

  No

• Ensure Annual Inspection has been completed within the last 13 months.

  Yes

  No

• All gauges operate properly.

  Yes

  No

• Hourmeter operates properly.

  Yes

  No

• Presence of fire extinguishers

  Yes

  No

• Overhead cage and seat condition?

  Pass

  Fail

• Condition of forks?

  Pass

  Fail

• Driving lights and indicators operate properly. (if applicable)

  Yes

  No

  N/A

• Check front, top, side and rear wear pads for presence of grease.

  Yes

  No

CAB AND ELECTRICAL

• General appearance; no visible damage.

  Yes

  No

• Frame level indicator and window glass undamaged and clean.

  Yes

  No

• Gauges, switches, joysticks, foot controls and horn operational.

  Yes

  No

• Seat belt in good condition and catches properly.

  Yes

  No

• Frame level and boom indicator are working?

  Pass

  Fail

POWER UNIT

• Engine oil, coolant, and battery fluid levels correct.

  Yes

  No

• Transmission operates correctly, transmission fluid level correct.

  Yes

  No

• Engine air filter clean and secure.

  Yes

  No

• Engine R.P.M. correct.

  Yes

  No

• Engine fuel level

  Full

  3/4

  1/2

  1/4

  Empty

• Radiator, oil cooler clean.

  Yes

  No

• Steering in both directions with engine at low idle

  Pass

  Fail

• All joystick functions operate smoothly and correctly.

  Pass

  Fail

• Fuel, oil filters secure and not leaking.

  Yes

  No

DRIVE TRAIN

• Wheel/Tire Assembly—Properly inflated and secured; no loose or missing lug nuts. Inspect for worn tread, cuts, tears or other discrepancies.

  Pass

  Fail

• Mirrors clean and undamaged

  Yes

  No

• Service brake and parking brake operation

  Pass

  Fail

• Battery cables tight, no visible damage or corrosion.

  Yes

  No

• Forward and reverse travel.

  Yes

  No

• Engine access doors closed and properly secured.

  Yes

  No

• Horn and Backup alarm operates properly.

  Yes

  No

HYDRAULIC SYSTEM

• Hydraulic oil level is correct.

  Yes

  No

• Pivot pins secure; hydraulic hoses undamaged, not leaking.

  Yes

  No

• Hydraulic controls go up, down, extend, retract?

  Yes

  No

• Front Axle - Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic hoses undamaged, not leaking.

  Yes

  No

• Outriggers - Pins secure; hydraulic hoses and cylinder undamaged, not leaking.

  Yes

  No

  N/A

• Rear Axle—Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic hoses undamaged, not leaking.

  Yes

  No

SAFETY AND OPERATOR’S MANUALS, DECALS

• Manuals & Required Documents. In storage box, in good condition & legible.

  Pass

  Fail

• Labels. In place, secure & legible.

  Pass

  Fail

• Load Chart is correct and legible?

  Pass

  Fail

• Controls, pedals and indicators are working correctly?

  Pass

  Fail