Information
-
Flight Type
-
Drone Model
-
Site name
-
Date / Time
Preflight Check at home
-
Check the weather forecast for the area
-
Check the airspace for the area and get authorization (if needed)
-
Check NOTAMs (Notices to Airmen)
-
Survey the site using Google Maps or Google Earth
-
Check that the drone’s firmware is up to date
-
Check that the controller’s firmware is up to date
-
Check that all hardware is charged
-
Check that the SD card is formatted and inserted into the drone
Documents
-
Obtained required airspace authorization (if applicable)
Preflight Check on site
Crew
-
Pilot
-
Co-Pilot
-
Visual Observer (if applicable)
-
Pilot License on hand
Weather Information
-
Cloud Cover %
-
Temperature
-
Wind Direction
-
Wind Speed (max 10,7 m/s (38,52 km/h) DJI Mini 4 Pro
Site information
-
Please check your local drone regulations and check if there are specific regulations that you need to follow.
-
Checked NOTAMS
-
Checked Flight Restriction Zone (FRZ) / Control Traffic Region (CTR)
-
Safe distance from crowds, animals, property
-
Clear of overhead obstructions (e.g. Buildings, Power lines, Trees, Cell Sites, Houses etc,)
-
Clear take off and landing site identified
-
Secondary Landing Zone identified
-
Landing Pad laid out
Take-Off Checklist
Drone Flight Equipment Visual Inspection
-
Gimbal Lock and Lens Cap REMOVED
-
Inspect frame for cracks, loose parts
-
Motors able to spin freely
-
Propellers and hubs free from cracks or damage
-
Checked for loose wires and tuck away
-
Batteries fully charged
-
Batteries inserted correctly
-
Controller fully charged
-
Drone and RC2 ON
Take-Off
-
Check the IMU and calibrate if needed
-
Check the compass and calibrate if needed
-
Signal and Satellite Strength checked
-
Set return-to-home altitude
-
Set the home point
-
Check all relevant camera settings
-
Perform a hover check (20s)
-
Inform spectators (if any)
-
Notes
-
Pilot's Signature
Post-Flight Checklist
Drone Post-Flight Checklist
-
Turn off all devices
-
Inspect the drone for damage: props, motors, arms, gimbal
-
Remove the battery
-
Let the motors cool
-
Secure the gimbal cover
-
Fold the legs and stow the drone etc.
-
Manoeuvre critique
-
Transfer data