Information

  • Audit Title

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

1.0 - Previous inspection

  • 1.1 - Has the last inspection been reviewed?

  • 1.2 - Are there no outstanding actions?

2.0 - Fire Prevention

  • 2.1 - Evacuation plan displayed and understood by all employees?

  • 2.2 - Evacuation procedures discussed regularly? (Twice annually)

  • 2.3 - Extinguishers in place, clearly marked for type of fire?

  • 2.4 - Extinguishers recently serviced? (Inspected monthly and serviced annually)

  • 2.5 - Extinguishers clear of obstructions?

  • 2.6 - Extinguisher handle is no more than 5ft max height & base not lower that 4in from ground?

  • 2.7 - Indicator signs visible and directly above extinguisher?

  • 2.8 - Adequate direction notices for fire exits?

  • 2.9 - Exit doors easily opened from inside?

  • 2.10 - Exits clear of obstructions?

  • 2.11 - Fire alarm system functioning correctly?

3.0 - General Lighting

  • 3.1 - Good natural lighting?

  • 3.2 - Reflected light from walls & ceilings not causing glare to employees?

  • 3.3 - Light fittings clean and in good condition?

  • 3.4 - Auxiliary lighting provided in work areas to assure proper illumination?

  • 3.5 - Emergency exit lighting operable?

4.0 - Building Safety

  • 4.1 - Floor surfaces even and uncluttered?

  • 4.2 - Entry and walkways kept clear?

  • 4.3 - Walkways adequately and clearly marked?

  • 4.4 - Intersections kept clear of boxes etc?

  • 4.5 - Stair and risers kept clear?

  • 4.6 - Are liquid spills removed quickly?

  • 4.7 - Are railings in good condition?

  • 4.8 - Are fall preventive measures in place and used where gaps occur in railings?

  • 4.9 - Are footpaths in good condition?

  • 4.10 - Are all permanent trip hazards identified with high visibility paint or markings?

  • 4.11 - Loading area clean and tidy?

5.0 - Work Benches

  • 5.1 - Clear of rubbish?

  • 5.2 - Tools not in use kept in place?

  • 5.3 - No damaged hand tools in use?

  • 5.4 - No damaged power tools in use?

  • 5.5 - Work height correct for the type of work and the employee?

  • 5.6 - No sharp edges?

6.0 - Rubbish Removal

  • 6.1 - Bins located at suitable points around site?

  • 6.2 - Bins emptied regularly?

  • 6.3 - Oily rags and combustible refuse in covered metal containers?

7.0 - Storage Design and Use

  • 7.1 - Materials stored in racks and bins wherever possible?

  • 7.2 Racks and Industrial shelves load rating posted ?

  • 7.3 - Floors around racking clear of rubbish?

  • 7.2 - Storage designed to minimise lifting problems?

  • 7.4 - General condition of racks and pallets?

8.0 - Machines

  • 8.1 - Are they kept clean?

  • 8.2 - Are the floors around the machines kept clean?

  • 8.3 - Guards in good condition?

  • 8.4 - Starting and stopping devices within easy reach of operator?

  • 8.5 - Waste/off cuts removed and stored safely?

  • 8.6 - Drip pans on floor to prevent spillage?

  • 8.7 - Adequate work space?

  • 8.8 - Is lighting adequate?

  • 8.9 - Noise levels controlled?

  • 8.10 - No bending or stooping required?

  • 8.11 - Equipment hazards labeled and identified ( High Voltage, Hazardous Material, etc...)?

  • 8.12 - Operators trained/inducted into the operation of the machines?

  • 8.13 - Is the training recorded?

  • 8.14 - Do operators comply with the training?

  • 8.15 - Are lockout procedures implemented and followed?

  • 8.16 - Are gas bottles secured?

  • 8.17 Compressor lines secured with whip checks?

9.0 - Electrical Safety

  • 9.1 - Safety switches installed?

  • 9.2 - Safety switches tested?

  • 9.3 - No double adapters in use?

  • 9.4 - Portable equipment tested and tagged?

  • 9.5 - No broken plugs, sockets or switches?

  • 9.6 - No power leads across walkways?

  • 9.7 - No frayed or damaged leads?

  • 9.8 - No strained leads?

  • 9.9 - Portable power tools in good condition?

  • 9.10 - Where required are emergency shut-down procedures in place?

10.0 - Chemical Safety

  • 10.1 - Hazardous Substance Register complete and available?

  • 10.2 - Material Safety Data Sheets available for all chemicals?

  • 10.3 - Risk assessments completed for hazardous substances?

  • 10.4 - All containers labelled correctly?

  • 10.5 - Unused substances disposed of?

  • 10.6 - Do special storage conditions apply?

  • 10.7 - If applicable are special storage conditions followed?

  • 10.8 - Workers trained in the use of hazardous substances?

  • 10.9 - If required is PPE available?

  • 10.10 - Is adequate ventilation provided?

  • 10.11 - Are eye washes and showers easily accessed?

11.0 Ladders

  • 11.1 - Are all ladders Industrial strength? (Non Household rated, check label.)

  • 11.2 - Are ladders in good condition?

  • 11.3 - If used for electrical work are they non conductive? (Wood or fibre glass.)

  • 11.4 - Used according to instructions?

  • 11.5 - For extension ladders are ropes, pulleys and treads in a good state of repair?

12.0 - First Aid Facilities

  • 12.1 - Are cabinets and contents clean and orderly?

  • 12.2 - Are contents regularly inventoried and documented?

  • 12.3 - No contents past their expiry date?

  • 12.4 - Cabinets clearly labelled?

  • 12.5 - Is there easy access to cabinets?

  • 12.6 - Employees aware of location of first aid cabinet?

  • 12.7 - Are first aid officers accessible?

  • 12.8 - Are emergency numbers displayed?

13.0 - Office Hazards

  • 13.1 - Condition of filing cabinets?

  • 13.2 - Condition of chairs? (Five star bases.)

  • 13.3 - Desks in good condition? (No damage.)

  • 13.4 - Screen Based Equipment positioned to reduce glare from windows etc?

  • 13.5 - Photocopiers positioned to avoid fumes?

  • 13.6 - Tasks designed to prevent Occupational Overuse Syndrome? (Breaks included.)

  • 13.7 - Air conditioning systems regularly maintained?

  • 13.8 - Stable non-slip floor coverings in good condition?

14.0 - Vehicle Condition

  • 14.1 - Schedule maintenance performed?

  • 14.2 - Condition of tires?

  • 14.3 - Brake performance?

  • 14.4 - Lights? (Check operation of brake, indicator and reversing lights)

  • 14.5 - Condition of drivers seat?

  • 14.6 - Condition of other seats?

  • 14.7 - First aid kit supplied and adequate?

  • 14.8 - Storage provisions?

15.0 Welding Cutting and Hot Work Safety

  • 15.1 Welding Machines grounded and or bonded?

  • 15.2 Welding machines inspected and documented?

  • 15.3 Cutting torches and hoses inspected and documented?

  • 15.4 Proper PPE provided and used during welding and cutting operations?

  • 15.5 Gas bottles secured with gauges removed after use and capped?

16.0 Equipment and Machinery Conditions

  • 16.1 Is the equipment properly labeled for any existing hazards?

  • 16.2 Has the equipment been inspected prior to use and as required by manufacture?

  • 16.3 Is the equipment in good condition and functioning properly?

  • 16.4 Are all safety features in working condition and clearly labeled?

  • 16.5 Has the equipment been modified in any way and have the modifications been approved by manufacture?

Sign Off

  • On site representative

  • Auditor's signature

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.