Information
-
Document No.
-
Client / Site
-
Conducted on
-
Prepared by
Preparation For Inspection
-
Inspector has at least a 6 foot ladder.
-
Inspector is wearing safety goggles.
-
Inspector is wearing safety gloves.
Generac 400kw Generator Inspection
-
Inspect the cooling equipment in door #4. Are there signs of Leaks?
-
Inspect the reservoir water level on top of the unit. Was water added to the reservoir?
-
In door #5 inspect the battery water level. Was water added to the battery?
-
In door #5 inspect the oil dip stick. Is the oil level low?
-
What is the condition of the oil?
-
Visually inspect all belts for signs of cracks or for unusual wear and select its condition.
-
Visually inspect all hoses and list its condition.
-
Visually inspect the jacket water heater and list its condition.
-
Visually inspect the fan and select its condition.
-
Open door #6 and locate the 24volt DC battery charging gauges. What is the reading of the gauge?
-
Ensure that all doors are locked.
Spectrum 250km Generator Inspection
-
Inspect the cooling equipment in door #4. Are there signs of Leaks?
-
Inspect the reservoir water level on top of the unit. Was water added to the reservoir?
-
In door #3 inspect the oil dip stick. Is the oil level low?
-
What is the condition of the oil?
-
Visually inspect all belts for signs of cracks or for unusual wear and select its condition.
-
Visually inspect all hoses and list its condition.
-
Visually inspect the jacket water heater and list its condition.
-
Visually inspect the fan and select its condition.
-
Open door #1 and locate the 24volt DC battery charging gauges. What is the reading of the gauge?
-
Locate the gas regulator and fuel value outside door #5. What is the position of the valve?
-
Ensure that all doors are locked.
Exercise And Wrap Up
-
Did the Generac turn on for the Exercise?
-
Did the Spectrum turn on for inspection?
-
Add signature