Information

  • Conducted on

  • Prepared by

  • Location
  • Engineer / Candidate

  • Fgas Assessment

  • Co2 Assessment

Compressors

  • Demonstrate Resistance Test. Part Wound & DOL.

  • Demonstrate Pump Down Test

  • Demonstrate Oil Differential Test. Positive & Negative Test

  • Demonstrate Knowledge of Common Faults

  • Demonstrate Knowledge of Compressor Commissioning

  • Demonstrate Knowledge of Oil System

Shop Floor Controllers

  • Demonstrate Knowledge of Carel Unit ID

  • Demonstrate Knowledge of RDM Unit ID

  • Demonstrate Knowledge of RCS Unit ID

Controls

  • Demonstrate Knowledge of Compressor Control Circuit Components

  • Demonstrate Contactor Test

  • Demonstrate Knoledge of Network Address / TP Link

  • Demonstrate Knowledge of Cabinet Controls

Co2

  • Demonstrate Safe Pump Down Procedure

  • Log Into Danfoss 255 and Navigate

  • Lower Receiver Pressure Via 326

Commissioning

  • Demonstrate Knowledge of Pressure Test. Strength & Leak

  • Demontrate Knowledge of Vac / Torr

  • Demonstrate Knowledge Adding Oil

  • Demonstrate Knowledge of Drier Change Procedure

  • Demonstrate Knowledge of Overload / Fuse Rating

  • Demonstrate Knowledge of Scroll Compressor Rotation

  • Commissioning Settings

  • Operational Checks

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.