Information

  • Audit Title

  • Document No.

  • Client / Site

  • Conducted on

  • Prepared by

  • Location
  • Personnel

Inspection Items

  • Does the emergency evacuation plan clearly reflect the workplace layout?

  • Have workers received information about the emergency plan for the workplace?

  • Has an evacuation drill been conducted in last 12 months? <br>(seek conformation from Emergency warden and record the last evacuation drill date in comments section)

  • Is the Emergency contacts poster up to date? <br>(Poster should have Wardens, First aid officer, Safety coordinators, Environmental coordinators and Emergency services)

  • Are building fire exits appropriately signposted?

  • Is fire fighting equipment (extinguishers, fire hoses) tagged and in current test?

  • Is there unobstructed access to fire fighting equipment?<br>(1m to clear access)

Buildings and Fences

  • Are drains inlets/outlets and pits throughout the site clear of silt/waste/weed build-up?

  • Are fences and gates maintained in serviceable condition?

  • Are signs/notices in good condition, appropriate, clearly visible and identifiable?

Workplace Traffic

  • Are roadways and path surfaces in good condition?

  • Are adequate controls in place to ensure vehicle and pedestrian safety in workplace areas?

  • Is the traffic control form filled out and appropriate for conditions?

  • Are pedestrian walkways clearly defined and signposted as required?

  • Are signs/notices in good condition, appropriate, clearly visible and identifiable?

  • Is access restricted to Hazardous operating areas where required?

  • Are controls affective?

Amenities

  • Are toilet facilities clean and functional?

  • Are workplace amenities maintained in a clean, hygienic manner?

Lighting

  • Is workplace lighting adequate for task? <br>If unsure, have light level measured.

  • Are all lights operational?

  • Is the level of natural lighting satisfactory?<br>Check condition of sources (eg. Are windows kept clean?)

  • Are lighting levels adequate for any recent changes to site/building layout?

Housekeeping

  • Are traffic areas, access ways, exits, straits or work areas clear of obstructions?<br>Check electrical leads are restrained.

  • Are work areas/benches in good conditions and clear of rubbish and surplus equipment?

  • Are stock materials clear of work areas & stored safely?

  • Workplace yard maintained in tidy condition?

Floors & Access Ways

  • Are stairs and access ways in sound condition (eg. No worn/damaged treads, trip hazards, slippery)?

  • Are pedestrian walkways clearly marked? (Where applicable)

  • Pare handrails in safe condition?

  • Are there any location where a person may fall, if so have these been assessed?

  • Are floor surfaces/coverings in good condition?<br> Check position/condition of mats.

  • Are floor surfaces free of slippery substances?

Personal Protective Equipment

  • Is appropriate PPE available and in good condition?

  • Are employees wearing PPE appropriate for task?

  • Have employees been trained in use and maintenance of PPE?

  • Is there appropriate storage facility for PPE where required?

Hazardous Chemicals

  • Are hazardous chemical storage containers labelled with product name, manufacturer, any hazard/risk associated with the product and safety phrase?

  • Are hazardous chemical signage/placards displayed as required?

  • Is workplace hazardous chemical register up to date?

  • Are up to date MSDSs readily available where hazardous chemicals are used?<br>(MSDS's should not be older than 3 years)

  • Hazardous chemicals and used container disposal meets environmental requirements?

  • Are work area walls, floors and outlets maintained?

  • Are oil/water separator maintained?

  • Is site clear of signs of recent spills or leaks?

  • Are oil spill containment kits available where required and maintained with a tamper proof seal?

Waste Management

  • Are there adequate waste bins available thought workshop?

  • Are waste bins regularly emptied and accumulated rubbish removed?

  • Is liquid waste storage and disposal utilized where provided?

  • Are recycling/special purpose containers utilized where provided and is there regular collection program in place?

Tools & Equipment

  • Are work surfaces in good condition?<br>(benches etc)

  • Are tools & equipments not in use, correctly stored?

  • Are tools and equipment maintained and in safe operating condition?

  • Is adequate work space provided around machinery?

  • Are moving parts adequately guarded? Eg. Nip in points

  • Are pre-start check conducted where applicable?<br>(eg. Forklift)

  • Where pre-start checks are conducted on equipment and are these actions raised to correct defects?

  • Are operators competent and authorized to use equipment as required?

  • Are mobile equipment reversing alarm functional?<br>(eg. Forklift)

  • Are Vehicle inspection/maintenance records current?

  • Are vehicle pre-start check being performed as required?

  • Is safety signage/decals in good condition?<br>(hazard signage on VLC's, exclusion zone table, operate using remote control etc)

  • Are safe work instructions(manuals) up to date?<br>(where applicable)

Hoist / Crane

  • Are Pre-use inspection done daily with a check list and documentation?

  • Are there training records available on worker permitted to use hoist?

  • Does the hoist / crane have annual inspection done by a qualified mechanic? and Do all operators know where to find it?

  • Is a hoist / crane operational manual available for workers?

Electrical Equipment

  • Is portable electrical equipment maintained, tagged, grounded and in current test?

  • Is electrical equipment maintained (switches, power points etc)?

  • Are safety switches (GFCI) fitted/used where required and tested regularly?

Ladders

  • Are ladders maintained, intest and stored safely?

  • Ae defective ladders withdrawn from service, tagged as unserviceable and quarantined?

Lifting Equipment

  • Is the lifting equipment fit for purpose and in test?

  • Is rigging inspected prior to use and does steel rigging have current tags?

  • Is the lifting equipment stored correctly, away from oils, acids and alkalis?

Welding

  • Is welding equipment in safe condition and maintainted<br>Check integrity of leads.

  • Are welding areas screened to reduce welding flash?

  • Are electric cables/gas hoses positioned clear of welding work area?

  • Are flash-back arresters fitted to oxy-acetylene equipment?

  • Are oxy acetylene hoses purged of gas when stored?

  • Is adequate ventilation provided?

  • Is the welding area clear of flammable/combustible material?

Additional Workplace Inspection Items

  • Is there a working alone policy?

Interview Workers:

  • Do workers understand their Rights and Responsibilities under the OHSA? Interview

  • What is your companies procedure when you have a work related injury here?

  • Who's responsibility is it to identify hazards?

  • Do you have a safety committee here and do you think that hazards get controled.

  • Do you know who in your company has first aid training?

  • Can you explain what the emergency response plan is for you company?

  • Do you know where to find the MSDS?

  • When your workplace has had an accident, what have you seen happen to investigating it and / or controlling it possible reoccurring? Did you feel that management takes an active part in investigating and controlling?

  • Where would you find WHMIS symbols in your workplace?

  • Determine what machine this worker operates: Explain the type of training you received to operate this machine. eg... forklift, air up tires, hoist etc..

Supervisor Interviews

  • What are your responsibilities as a supervisor when it comes to safety here in Ontario

  • How do you participate with the safety committee as a supervisor?

  • What type of training did you get to become a supervisor of this company?

  • When you have a new worker starting what type of training do you provide for them? Explain

  • As a Supervisor do you know what your liability is if a contractor or sub contractor get hurt at your company?

  • If your worker is injured do to a work related injury do you have a procedure or return to work program that you offer?

  • Have you ever had to give a corrective action to an employee for an unsafe act?

Worker Safety Representative Interview

  • Explain your role for sitting on this safety committee and acting as the Worker Safety Representative?

  • Do you give work direction to any other workers?

  • As a safety worker representative have you ever had to investigate an accident at this work place? Explain

  • Were you elected by the workers or where you Volunteered by management?

  • What PPE is mandatory and what is voluntary?

  • How do you do your workplace inspections?

Signoff

  • Owner's Safety Representative

  • Constructor's Safety Representative

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.