High Voltage Network Inspection - RMU

• Client

• SimPro Project Number

• NPE-Tech Representative

• Location
  Address

• Prepared by

• Approved by

Ring Main Inspection - General

• Ring Main Number

• Is there a RM label externally visible with this number?

  Yes

  No

  N/A

• Date of inspection

  Date

• Inspected by

• RMU Manufacturer

  ABB

  Siemans

  Long and Crawford

  Schneider

  Other

• Who is the Manufacturer?

• RMU Type (i.e. Safelink)

• Serial Number

• Date of manufacture

  Date

• Is there a Voltage warning sign on outside of cubicle?

  Yes

  No

  N/A

• Is the cubicle easily accessible?

  Compliant

  Non-Compliant

  N/A

• Is the cubicle secured to the plinth?

  Compliant

  Non-Compliant

  N/A

• Is the cubicle sturdy?

  Compliant

  Non-Compliant

  N/A

• Is the RMU secured to plinth?

  Compliant

  Non-Compliant

  N/A

• Door hinges functional and lubricated?

  Pass

  Fail

  N/A

• Is the cubicle bonded to earth and is the earth adequate?

  Compliant

  Non-Compliant

  N/A

• Is there vegetation inside the cubicle?

  Yes

  No

  N/A

• Is the SF6 gas level indicator within acceptable range?

  Compliant

  Non-Compliant

  N/A

• Is there any exposure to members of the public?

  High

  Medium

  Low

• Are the operating handles located inside the cubicle?

  Yes

  No

  N/A

• Where are the handles?

  Select Outside Cubicle Unable to locate Other (ie shared between two ringmains, please describe)

  • Outside Cubicle
  • Unable to locate
  • Other (ie shared between two ringmains, please describe)

• Describe where handle is located or how to access handle.

• How many units are present in the ringmain?

  1

  2

  3

  4

• Is the ringmain indoor or outdoor?

  Indoor

  Outdoor

• Does the room have 24 hour access?

  Yes

  No

  N/A

• Where is the key located/how is access gained?

• Are cable end blocks fitted?

  Compliant

  Non-Compliant

  N/A

• Are the slide locks on the door functional and do they engage?

  Pass

  Fail

  N/A

• Are the RMU labels on all units? (i.e. RM1234 U1 RM1234 E2)

  Compliant

  Non-Compliant

  N/A

• Which labels are missing?

• Are main earths both labelled (1 and 2)

  Select Main Earth Bank 1 and 2 both labelled Main Earth Bank 1 labelled only Main Earth Bank 2 labelled only Neither Earth Bank labelled

  • Main Earth Bank 1 and 2 both labelled
  • Main Earth Bank 1 labelled only
  • Main Earth Bank 2 labelled only
  • Neither Earth Bank labelled

Earth Bank 1 test (Results to be noted and photographed)

• Write test results then attach photos.

Earth Bank 2 test (Results to be noted and photographed)

• Write test results then attach photos.

Combined Earth Bank test (Result to be noted and photographed)

• Write test results then attach photos.

• Take photos of inside and outside showing general condition of asset, housing and surrounding area.

  Media
Specific RM Unit assessment

• What is the unit number

  U1

  U2

  U3

  U4

• Is position indicator clearly visible?

  Pass

  Fail

  N/A

• Is there an earth fault indicator present on this unit?

  Yes

  No

  N/A

• Is there pitch leaking from cable box?

  Yes

  No

  N/A