Hose reel Inspection Report Annual

• Report number

• Report type

  Select Fire hose reel System Inspection report Fire hose reel System Re Inspection

  • Fire hose reel System Inspection report
  • Fire hose reel System Re Inspection
• Location
  Address

• Conducted on

  Date

• Prepared by

  Select

• HOLLAND BROS PLUMBING (NSW) PTY LTD

• 2/14 Chicago Ave, Blacktown NSW 2148

• Phone: 9764 2790 Mobile: 0414 244 635

• ABN: 51 003 968 616 LIC NO: 223351C

• Email: martin@hollandbrosplumbing.com.au

• Website: www.hollandbrosplumbing.com.au

Fire hose reel

• ACCESSIBILITY. Check that the hose reel is readily accessible with no obstacles restricting its access. where a hose reel is installed in a recess or cabinet, Check that the clearance around the hose reel comply with the requirements of AS 2441

  Pass

  Fail

  N/A

• Fire hose reel Photo

  Media

• SIGNAGE. Where a location sign is required by As 2441, Check that it is correctly located and visible.

  Pass

  Fail

  N/A

• OPERASTING INSTRUCTIONS. Check that the operating instructions are legible.

  Pass

  Fail

  N/A

• DAMAGE. Check for any damage or corrosion of components that could adversely affect the operation of the hose reel

  Pass

  Fail

  N/A

• CABINET. Check that any hose reel cabinet is accessible, clear of extraneous material, clearly and correctly marked and in good repair

  Pass

  Fail

  N/A

• NOZZLE INTERLOCK. Check that the nozzle is retained in the nozzle interlock

  Pass

  Fail

  N/A

• SWING ARM. Where fitted, Test the swing arm to ensure it operates correctly and allows the hose to be run off in its intended direction

  Pass

  Fail

  N/A

• UNWIND. With the nozzle closed and stop valve open, TEST that the hose reel can be unwound freely in its intended direction by unwinding at least 5M of hose.

  Pass

  Fail

  N/A

• LEAKAGE. With the nozzle closed, pressurize the reel by opening the stop valve. DETERMINE if there are any leaks from the reels waterway, including glands, nozzle, stop valve, hose or any fittings.

  Pass

  Fail

  N/A

• FLOW. Test water to ensure it is able to flow through the reel by opening and closing the nozzle.

  Pass

  Fail

  N/A

• SERVICE TAG OR LABEL. Check that the service tag or label is firmly attached to the hose reel.

  Pass

  Fail

  N/A

• Complete all six-monthly service activities, as listed above

Fire hose reel

• ANCHOR POINTS. Check that the hose reel is securely mounted and that the anchor points are tight.

  Pass

  Fail

  N/A

• HOSE GUIDE. Check that any hose guide fixed to the hose reel supply pipe is not able to move upward and cause the hose to jamb.

  Pass

  Fail

  N/A

• HOSE FITTINGS. Check that all hose fittings and connections are tight.

  Pass

  Fail

  N/A

• BEARINGS. Check that the hose reel bearings are not damaged or excessively worn.

  Pass

  Fail

  N/A

• FLOW RATE. Minimum acceptable is 0.33l/s for 19mm hose and 0.41l/s for 25mm hose

  Pass

  Fail

  N/A

• FLOW RATE @ 0.33l/s with 19mm hose in KPA

• PHOTO of flow gauge

  Media

• FLOW RATE @ 0.41l/s with 25mm hose in KPA

• PHOTO of flow gauge

  Media

• HOSE. Check hose for kinking, excessive damage or wear, or collapse

  Pass

  Fail

  N/A

• ANCILLARY EQUIPMENT. Check that any foam branch pipe or other equipment is in good repair and maintained in accordance with the manufacturers instructions.

  Pass

  Fail

  N/A

• FIRE HAZARD. Check that the hose reel is appropriate protection for the fire hazard/risk

  Pass

  Fail

  N/A

• OBSTRUCTIONS. Check that no alterations have been made to the building, which impede access to the hose reel or restrict the running out of the hose, ans that the hose can reach the fire hazard/risk in accordance with AS2441

  Pass

  Fail

  N/A