Title Page

  • Site conducted

  • Audit Title

  • Project Name

  • Conducted on

  • Prepared by

  • Location
  • Instructions
    -------------------
    1. Answer "Checked" or "Hold" for the questions below, then identify the personnel who conducted the checking.
    2. Add photos and notes by clicking on the paperclip icon.
    3. To add a Corrective Measure click on the paperclip icon, then "Add Action", provide a description, assign to a member, set priority and due date.
    4. Complete audit by providing digital signature.
    5. Share your report by exporting as PDF, Word, Excel or Web Link

Horizontal Siderise Firebarrier

  • Main Contractor:

  • Project Number:

  • Issued to:

  • QA Sheet No:

  • Elevation:

  • Level:

  • Comments:

Siderise fire barrier materials

  • Fire barrier schedule is available<br>within the site documentation

  • Personnel

  • Fire barrier materials have been<br>checked on delivery to site to be<br>correct type and specification in<br>accordance with the ICS fire barrier<br>schedules.

  • Personnel

  • Fire barrier materials have been<br>stored on site in an appropriate<br>manned in accordance with<br>manufacturers recommendation.<br>"Keep material in original packaging<br>until it is to be used. Store material<br>to protect against<br>damage including the weather"

  • Personnel

  • All fire barrier brackets, fixings and<br>tape has been delivered to site and<br>checked that they are in accordance<br>with the ICS fire barrier schedule<br>and manufacturers specification.

  • Personnel

Pre-installation

  • A site meeting with fire barrier<br>supplier [Siderise] arranged and<br>carried out in advance of installation<br>works commencing. To include any<br>training that may be required.

  • Personnel

  • ICS Fire barrier construction<br>drawing are on site within the ICS<br>drawing file.

  • Personnel

  • All installation operatives have been<br>briefed on the specific installation of<br>the fire barriers to be installed, in<br>accordance with manufacturers<br>recommendation

  • Personnel

Fire barrier installation

  • Ensure that horizontal barriers are<br>installed after vertical barriers.

  • Personnel

  • Check fire barrier locations are in<br>accordance with ICS fire barrier<br>setting out construction drawings.

  • Personnel

  • At each fire barrier location, check<br>that thickness of fire barrier is in<br>accordance with cavity void and<br>allow a 50mm air flow gap between<br>the fire barrier front edge and the<br>rear face of the cladding panel. in<br>accordance with the manufacturers<br>specification.

  • Personnel

  • If the horizontal fire barrier to be<br>installed requires to be cut to size,<br>make sure that you cut the rear<br>edge of the barrier in accordance<br>with manufacturers specification.

  • Personnel

  • Manually fold RH installation<br>brackets 90 degrees at a point to<br>allow the correct embedment into<br>the fire barrier. This needs to be<br>long enough to allow the split end of<br>the bracket to protrude from the<br>barrier front face.

  • Personnel

  • RH Bracket fixings are fixed at<br>400mm centres with non<br>combustible fixings [no plastic or<br>rubber washers]. Ensure fixings are<br>as per ICS and manufacturers<br>specification. [3 x brackets per<br>1200m barrier length] no

  • Personnel

  • Ensure that the fire barrier is tightly<br>abutted to the barriers to each side<br>and seal the joints with RFT 120 x 45<br>foil tape.

  • Personnel

  • Arrange inspection by Siderise before commencing with any further cladding finishes.

  • On completion of inspection, cavity<br>fire barriers are to be signed off by a<br>Siderise approved qualified person.

Completion

  • Installer Signature:

  • ICS Signature:

  • Client Signature:

The templates available in our Public Library have been created by our customers and employees to help get you started using SafetyCulture's solutions. The templates are intended to be used as hypothetical examples only and should not be used as a substitute for professional advice. You should seek your own professional advice to determine if the use of a template is permissible in your workplace or jurisdiction. You should independently determine whether the template is suitable for your circumstances.