Title Page
-
Conducted on
-
Prepared by
Pre Inflation Checks
-
Ensure the fans are not covered by the uninflated walls and are free to take in air during inflation.
-
Ensure the fans are not covered with excessive dust.
-
Are the electrical sockets and cables properly connected, with no signs of chafing or damage?
-
Ensure that all deflation zips are closed.
-
Is the padding around the central and entrance pillars intact, with no signs of damage?
-
Ensure the fans are positioned correctly, adequately protected and are not presenting a trip hazard.
-
Ensure that no one is standing on the inflatable.
Post Inflation Checks
-
Ensure every emergency exit and staff only door is securely zipped/closed.
-
Ensure the slide sheets and protection sheets are attached properly, and do not show any signs of damage.
-
Ensure the slide sheets have been sufficiently sprayed with silicone spray.
-
Record the pressure of the inflatable using a manometer. The pressure should not be below 1000Pa.
-
Is the setup of each activity adequate, with no missing parts?
-
Is the surface of the inflatable free from rips, tears or damage? Walk around and listen for louder whistling noises from air loss points. Anything greater than 0.8mm must be reported & repaired immediately.
-
Ensure there are no exposed electrical parts or wires.
-
Are the walls and beds safely connected without any visible entrapment holes?
-
Ensure that trial runs have been performed on all sections of the park before users are allowed to enter.
-
Is the park clean & tidy?
Sign Off
-
Name
-
Sign off
