Information
-
Item description
-
This inspection carried out on.
-
Last inspection carried out.
-
Was the last inspection completed within the last 12 months?
-
Hardware Location
-
Model #
-
Serial #
-
Date of Manufacture
-
Factory Order # / Lot #
-
Manufacturer
-
Withdrawal date
-
Inspection completed by (enter name).
-
Location
1 Condition, Housing, Handle & Impact Indicator
-
This checklist should be used for completing inspections of type 2 & 3 fall arresters as per AS/NZS 1891.4.
-
Add photo(s) of item being inspected.
Type 2 & 3
-
Is the Hardware beyond its annual service date?
-
Enter how far past it's required annual service date the hardware is and any other information related to this issue.
-
Enter photos of previous test tag (if possible) showing the date when it was due.
-
Does the lifeline retract completely?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Does the lifeline lock-off completely?
-
Enter details of any issues found?
-
Enter photos of any issues found.
Housing
-
Are there any cracks / distortion in the housing?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Are there any dents that are impeding the operation of the fall arrester housing?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the housing dirty or contaminated?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the fall arresters housing missing any parts such as screws, bolts, etc?
-
Enter details of any issues found?
-
Enter photos of any issues found.
Handle
-
Is the handle damaged?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the handle bent / loose?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the handle missing any parts / screws?
-
Enter details of any issues found?
-
Enter photos of any issues found.
Impact Indicator (where applicable)
-
Is the impact indicator damaged?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the impact indicator missing?
-
Enter details of any issues found?
-
Enter photos of any issues found.
-
Is the impact indicator deployed?
-
Enter details of any issues found?
-
Enter photos of any issues found.
2 Webbing
Webbing
-
Are there any cuts, tears or holes in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Are there any burns in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Are there any frays in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Are there any knots in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any grease or grime on the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any UV damage visible in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any Paint on the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any Discolouration in the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any Mould on the webbing?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is any of the stitching or stitching pattern missing / damaged?
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
-
Is there any Heat damage / glazing on the webbing.
-
Enter details of issues found. Is the harness ok to use or does it need to be removed from service and destroyed?
-
Add photos of any issues found.
3 Labels
Labels
-
Are labels present and attached? (Enter details of any issues found)
-
Enter corrective action taken or the action required to address the issue. (Does the harness need to be removed from service).
-
Add photos of any issues found.
-
Are labels legible? (Enter details of any issues found)
-
Enter corrective action taken or the action required to address the issue. (Does the harness need to be removed from service).
-
Add photos of any issues found.
4 Connectors and Wire Rope
Connectors - including Karabinas, Snap Hooks and Tube Nut connectors.
-
Are any of the connectors cracked?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Do any of the connectors have sharp edges?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Do any of the connectors have any missing parts?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are any of the connectors corroded?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are all of the connectors labelled with details such as SWL?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are any of the connectors bent / distorted?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Do any of the connectors have sticky gates?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Do any of the connectors stay open or won't lock?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are the connectors covered in excessive dirt / grease?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Do any of the connectors close but won't lock?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
Wire Rope
-
Is any of the Wire Rope heat damaged?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the Wire Rope kinked?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Does the Wire Rope have a missing / damaged thimble?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the Wire Rope loose or does it have a loose termination?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the Wire Rope corroded or is there any corrosion evident?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the Wire Rope distorted?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Does any of the wire rope have any broken wires?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Can you see any separation of strands in the wire rope?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is the wire rope dirty / greasy?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is there any bird caging in the wire rope?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
5 Shock Absorber
Shock Absorber
-
Has the shock absorber been deployed? Is it stretched / elongated?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are there any cuts / tears / abrasions present on the shock absorber?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is the shock absorber excessively soiled.
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is there any UV damage / fading in the shock absorber?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Are there any holes / burns in the shock absorber?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is the plastic cover missing?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
6 Stitching
Stitching
-
Is there any missing stitch patterns?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the stitching burned?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the stitching cut?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the stitching pulled?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
-
Is any of the stitching broken?
-
Enter corrective action taken or the action required to address the issue.
-
Add photos of any issues found.
7 Final Appraisal
Action to be taken
-
Select one only
- Clean & Re-Inspect
- Return to Manufacturer for Clarification
- Return to Service
- Remove from service and Destroy
Overall PASS or FAIL
-
Based on the inspection what is the overall result?
-
Signature of person finalising inspection and result.